[Wed Jun 12 12:53:11 2013] Detection parameters:
  Position = (216.5, 186.7) = 18 14 43.87 -32 56 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 282.8 +/- 28.5
  Background counts = 290.5
  Rate = 0.002 +/- 0.0002

[Wed Jun 12 12:53:14 2013] Off-axis axis estimate = 10.05'
[Wed Jun 12 12:53:57 2013] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:53:57 2013] Initial guess for spatial extent in simple fitting = 11.45"
[Wed Jun 12 12:53:57 2013] source mask rpix=2.6, npix_max = 39, mask sum = 26, frac = 0.662
[Wed Jun 12 12:53:57 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 11.45"
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src18.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src18.csv
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src18.csv
[Wed Jun 12 12:53:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Jun 12 12:54:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Jun 12 12:54:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Jun 12 12:54:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:25 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 15.445965 pixels away
[Wed Jun 12 12:54:25 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:25 2013] Assessing source extent using major
[Wed Jun 12 12:54:25 2013] Source does appear to be extended
[Wed Jun 12 12:54:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:56 2013] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:56 2013] Initial guess for spatial extent in simple fitting = 11.45"
[Wed Jun 12 12:54:56 2013] source mask rpix=2.6, npix_max = 39, mask sum = 26, frac = 0.662
[Wed Jun 12 12:54:56 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 11.45"
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src18.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src18.csv
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src18.csv
[Wed Jun 12 12:54:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed Jun 12 12:55:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Jun 12 12:55:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Jun 12 12:55:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:19 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.341929 pixels away
[Wed Jun 12 12:55:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:19 2013] Assessing source extent using major
[Wed Jun 12 12:55:19 2013] Source does appear to be extended
[Wed Jun 12 12:55:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:44 2013] XMMSAS src. selection expression = ellipse(18785.221130, 16194.164764, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 12:55:44 2013] Not overwriting source region fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20_src.reg
[Wed Jun 12 12:55:44 2013] Extracting stamp from image fullrun_pn_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (179, 149) - (254, 224)
[Wed Jun 12 12:55:44 2013] XMMSAS bgd. selection expression = annulus(18785.221130, 16194.164764, 1087.500000, 2175.000000, X, Y) && !ellipse(20349.758209, 15273.598404, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 12:55:44 2013] Writing fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20.gif
[Wed Jun 12 12:55:55 2013] ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create
[Wed Jun 12 12:55:56 2013] Mean detx,y = (-7833.97, 11491.96) 
[Wed Jun 12 12:55:56 2013] ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20_src.img and ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create
[Wed Jun 12 12:55:56 2013] ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create
[Wed Jun 12 12:55:56 2013] Setting source spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Jun 12 12:55:56 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Jun 12 12:55:56 2013] ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create
[Wed Jun 12 13:49:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 13:49:50 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:12:24 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:24 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 1189.00
[Wed Jun 12 15:12:24 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20_bgd.pi.gz = 8603.00
[Wed Jun 12 15:12:24 2013] Got source and background scale factors 1103476.000000, 8786079.000000
[Wed Jun 12 15:12:24 2013] User source parameters:
  Position = (216.5, 186.7) = 18 14 43.87 -32 56 59.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 108.5 +/- 35.5
  Background aperture counts = 1080.5
  Rate = 0.001 +/- 0.0003

[Wed Jun 12 15:12:24 2013] Updating counts from extracted products
[Wed Jun 12 15:12:24 2013] Set source signif. to 108.52/32.87 = 3.30
[Wed Jun 12 15:12:34 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:34 2013] Using photon index=1.80, rate=0.00102, arf fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20.arf
[Wed Jun 12 15:12:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:34 2013] Getting flux using calc_pl_flux failed
[Wed Jun 12 15:12:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:13:08 2013] xmm0604860301/analysis//spectral/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete