[Wed Jun 12 12:53:11 2013] Detection parameters:
  Position = (213.7, 239.8) = 18 14 44.82 -32 53 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 591.7 +/- 38.5
  Background counts = 317.2
  Rate = 0.005 +/- 0.0003

[Wed Jun 12 12:53:14 2013] Off-axis axis estimate = 7.47'
[Wed Jun 12 12:53:57 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:53:57 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Wed Jun 12 12:53:57 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.119
[Wed Jun 12 12:53:57 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 10.16"
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src15.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src15.csv
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src15.csv
[Wed Jun 12 12:53:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Jun 12 12:54:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Jun 12 12:54:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed Jun 12 12:54:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:25 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 17.076380 pixels away
[Wed Jun 12 12:54:25 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:25 2013] Assessing source extent using major
[Wed Jun 12 12:54:25 2013] Source does appear to be extended
[Wed Jun 12 12:54:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:56 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:56 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Wed Jun 12 12:54:56 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.119
[Wed Jun 12 12:54:56 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 10.16"
[Wed Jun 12 12:54:57 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src15.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src15.csv
[Wed Jun 12 12:54:59 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Jun 12 12:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src15.csv
[Wed Jun 12 12:54:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Jun 12 12:55:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Jun 12 12:55:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed Jun 12 12:55:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:19 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.041882 pixels away
[Wed Jun 12 12:55:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:19 2013] Assessing source extent using major
[Wed Jun 12 12:55:19 2013] Source does appear to be extended
[Wed Jun 12 12:55:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:44 2013] XMMSAS src. selection expression = ellipse(18542.037704, 20815.685318, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 12:55:44 2013] Not overwriting source region fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17_src.reg
[Wed Jun 12 12:55:44 2013] Extracting stamp from image fullrun_pn_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (176, 202) - (251, 277)
[Wed Jun 12 12:55:44 2013] XMMSAS bgd. selection expression = annulus(18542.037704, 20815.685318, 1087.500000, 2175.000000, X, Y) && !ellipse(21245.184000, 22427.046800, 535.090415, 535.090415, 0.000000, X, Y) && !ellipse(19338.727036, 21315.679108, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 12:55:44 2013] Writing fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17.gif
[Wed Jun 12 12:55:54 2013] ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Wed Jun 12 12:55:54 2013] Mean detx,y = (-8242.00, 6887.32) 
[Wed Jun 12 12:55:54 2013] ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17_src.img and ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Wed Jun 12 12:55:54 2013] ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Wed Jun 12 12:55:54 2013] Setting source spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jun 12 12:55:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jun 12 12:55:54 2013] ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Wed Jun 12 13:46:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 13:46:37 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:12:23 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:23 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 1749.00
[Wed Jun 12 15:12:23 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17_bgd.pi.gz = 9933.00
[Wed Jun 12 15:12:23 2013] Got source and background scale factors 1235378.000000, 9648925.000000
[Wed Jun 12 15:12:23 2013] User source parameters:
  Position = (213.7, 239.8) = 18 14 44.82 -32 53 4.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 477.3 +/- 42.8
  Background aperture counts = 1271.7
  Rate = 0.004 +/- 0.0004

[Wed Jun 12 15:12:23 2013] Updating counts from extracted products
[Wed Jun 12 15:12:23 2013] Set source signif. to 477.25/35.66 = 13.38
[Wed Jun 12 15:12:34 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:34 2013] Using photon index=1.80, rate=0.0045, arf fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17.arf
[Wed Jun 12 15:12:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:34 2013] Updating source flux to 3.2e-14
[Wed Jun 12 15:12:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:13:08 2013] xmm0604860301/analysis//spectral/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete