[Wed Jun 12 12:53:10 2013] Detection parameters:
  Position = (313.3, 315.9) = 18 14 10.44 -32 47 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181789.4 +/- 504.5
  Background counts = 413.7
  Rate = 2 +/- 0.005

[Wed Jun 12 12:53:14 2013] Off-axis axis estimate = 1.66'
[Wed Jun 12 12:53:57 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:53:57 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Wed Jun 12 12:53:57 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Wed Jun 12 12:53:57 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src1.csv
[Wed Jun 12 12:53:58 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 12 12:53:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src1.csv
[Wed Jun 12 12:53:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 12 12:54:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 12 12:54:00 2013] Fit fullrun_pn_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 12 12:54:25 2013] Spatial fit model total counts = 139459.000000, observed total counts = 141735.000000
[Wed Jun 12 12:54:25 2013] Offset between fit and detection position for source 1 = 0.110231 pixels
[Wed Jun 12 12:54:25 2013] 139463.000000 total counts/ 25600.000000 bgd. counts: snr = 711.643750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.110231 pixels
  Position = (313.2, 315.9) = 18 14 10.47 -32 47 34.7
  Extent = 5.8 (5.8-5.8)", rotation angle = 0
  Source counts = 113863.0 +/- 373.4
  Background counts = 25600.0
  Rate = 1 +/- 0.004
[Wed Jun 12 12:54:25 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:25 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 12:54:25 2013] Source does appear to be extended
[Wed Jun 12 12:54:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:56 2013] Initial guess for spatial extent in simple fitting = 5.79"
[Wed Jun 12 12:54:56 2013] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.194
[Wed Jun 12 12:54:56 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.79"
[Wed Jun 12 12:54:56 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 12 12:54:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src1.csv
[Wed Jun 12 12:54:56 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 12 12:54:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src1.csv
[Wed Jun 12 12:54:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 12 12:55:00 2013] fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 12 12:55:00 2013] Fit fullrun_pn_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 12 12:55:18 2013] Spatial fit model total counts = 139458.000000, observed total counts = 141735.000000
[Wed Jun 12 12:55:18 2013] Offset between fit and detection position for source 1 = 0.000000 pixels
[Wed Jun 12 12:55:18 2013] 139463.000000 total counts/ 25600.000000 bgd. counts: snr = 711.643750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (313.2, 315.9) = 18 14 10.47 -32 47 34.7
  Extent = 5.8 (5.8-5.8)", rotation angle = 0
  Source counts = 113863.0 +/- 373.4
  Background counts = 25600.0
  Rate = 1 +/- 0.004
[Wed Jun 12 12:55:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:19 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 12:55:19 2013] Source does appear to be extended
[Wed Jun 12 12:55:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:43 2013] Counts = 113863.000000, rescaling region sizes by 3.000000
[Wed Jun 12 12:55:43 2013] XMMSAS src. selection expression = ellipse(27196.310180, 27431.783600, 1041.435030, 1041.435030, 0.000000, X, Y)
[Wed Jun 12 12:55:43 2013] Not overwriting source region fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 12 12:55:43 2013] Extracting stamp from image fullrun_pn_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (253, 256) - (373, 376)
[Wed Jun 12 12:55:44 2013] XMMSAS bgd. selection expression = annulus(27196.310180, 27431.783600, 5207.175150, 10414.350300, X, Y) && !ellipse(24093.997345, 29048.621857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15981.123886, 28423.840363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30934.308624, 33368.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35278.783508, 33532.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38699.087400, 33728.172000, 1688.256049, 1648.920047, 245.168000, X, Y) && !ellipse(34480.420440, 34392.459200, 427.396012, 427.396012, 0.000000, X, Y) && !ellipse(20546.013992, 29791.745972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33260.568298, 36598.168457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26911.415113, 20949.433484, 566.240783, 399.166176, 90.893166, X, Y) && !ellipse(18542.037704, 20815.685318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18785.221130, 16194.164764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24261.213745, 37818.733215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29490.614400, 32933.339800, 367.284011, 367.284011, 0.000000, X, Y) && !ellipse(30884.293182, 31429.989319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36499.844228, 28968.787283, 452.119828, 395.572457, 77.497866, X, Y) && !ellipse(18525.927400, 27271.994800, 468.805613, 347.759210, 79.611900, X, Y) && !ellipse(35836.453827, 22552.909485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25176.391724, 19076.055695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28181.170685, 16749.515915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22929.982056, 16182.012695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22312.682434, 38578.727386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34605.287537, 38051.496979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29314.422150, 37875.152588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19450.912643, 37907.015594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35918.839386, 34911.510651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27598.006775, 31776.351166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34357.897000, 29775.327400, 540.833616, 540.833616, 0.000000, X, Y) && !ellipse(30776.976898, 29405.245392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27093.052063, 28827.181793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26430.967407, 28903.320068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22669.441376, 28221.067810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23835.129333, 27822.415161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18143.511169, 27705.936371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15929.329575, 26310.075958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22620.318024, 25921.345154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36067.783875, 25351.899780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18309.309930, 25372.435400, 294.003208, 294.003208, 0.000000, X, Y) && !ellipse(27044.690800, 24314.062000, 1143.408033, 1143.408033, 0.000000, X, Y) && !ellipse(30960.532349, 23896.436615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20642.864680, 23681.125200, 463.613613, 463.613613, 0.000000, X, Y) && !ellipse(27022.351500, 23867.846200, 819.592024, 819.592024, 0.000000, X, Y) && !ellipse(24106.627319, 23410.014008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27017.843420, 23164.424460, 941.672027, 941.672027, 0.000000, X, Y) && !ellipse(26973.112760, 22338.105405, 1273.648037, 331.823794, 93.804681, X, Y) && !ellipse(21245.184000, 22427.046800, 535.090415, 535.090415, 0.000000, X, Y) && !ellipse(26959.922800, 22172.886000, 766.844822, 766.844822, 0.000000, X, Y) && !ellipse(26909.651400, 20906.702000, 1406.808040, 359.086410, 90.000000, X, Y) && !ellipse(19338.727036, 21315.679108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31233.519806, 20311.219131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26859.085571, 20320.992294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30917.480000, 20113.703800, 1535.056044, 836.128024, 319.589000, X, Y) && !ellipse(35853.395569, 19934.820938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26864.031200, 19699.079216, 813.976023, 813.976023, 0.000000, X, Y) && !ellipse(26849.448600, 18855.608000, 749.189622, 749.189622, 0.000000, X, Y) && !ellipse(30816.313812, 18580.317917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26779.211670, 18138.207748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23423.828125, 17828.190598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26765.371002, 17353.126205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26711.396299, 16181.948669, 2235.152064, 456.054544, 93.346654, X, Y) && !ellipse(26685.943400, 15687.610000, 2235.152064, 422.748012, 93.419980, X, Y) && !ellipse(26665.828600, 15397.577600, 1746.144050, 489.008014, 92.171350, X, Y)
[Wed Jun 12 12:55:44 2013] Writing fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1.gif
[Wed Jun 12 12:55:46 2013] ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0604860301/products/events/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Jun 12 12:55:47 2013] Mean detx,y = (153.93, -91.24) 
[Wed Jun 12 12:55:47 2013] ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1_src.img and ../../xmm0604860301/products/images/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Jun 12 12:55:47 2013] ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Jun 12 12:55:47 2013] Setting source spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 12 12:55:47 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 12 12:55:47 2013] ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Jun 12 15:12:21 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:21 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 149434.00
[Wed Jun 12 15:12:21 2013] Total counts from fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 209041.00
[Wed Jun 12 15:12:21 2013] Got source and background scale factors 3310034.000000, 188313716.000000
[Wed Jun 12 15:12:21 2013] User source parameters:
  Position = (313.2, 315.9) = 18 14 10.47 -32 47 34.7
  Extent = 5.8 (5.8-5.8)", rotation angle = 0
  Source aperture counts = 145759.6 +/- 387.6
  Background aperture counts = 3674.4
  Rate = 1 +/- 0.004

[Wed Jun 12 15:12:34 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:34 2013] Using photon index=1.80, rate=1.07, arf fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1.arf
[Wed Jun 12 15:12:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:34 2013] Updating source flux to 3.5e-12
[Wed Jun 12 15:13:08 2013] xmm0604860301/analysis//spectral/fullrun_pn_xmm0604860301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete