[Wed Jun 12 12:53:19 2013] Detection parameters:
  Position = (355.7, 231.9) = 18 13 55.77 -32 53 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.7 +/- 16.0
  Background counts = 86.3
  Rate = 0.001 +/- 0.0002

[Wed Jun 12 12:53:19 2013] Off-axis axis estimate = 6.37'
[Wed Jun 12 12:54:03 2013] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:03 2013] Initial guess for spatial extent in simple fitting = 9.61"
[Wed Jun 12 12:54:03 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.022
[Wed Jun 12 12:54:03 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 9.61"
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src35.ximg exists
[Wed Jun 12 12:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src35.csv
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed Jun 12 12:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src35.csv
[Wed Jun 12 12:54:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:05 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed Jun 12 12:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src35.csv
[Wed Jun 12 12:54:05 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed Jun 12 12:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src35.csv
[Wed Jun 12 12:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:39 2013] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 13.517533 pixels away
[Wed Jun 12 12:54:39 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:39 2013] Assessing source extent using major
[Wed Jun 12 12:54:39 2013] Source does appear to be extended
[Wed Jun 12 12:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:02 2013] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:55:02 2013] Initial guess for spatial extent in simple fitting = 9.61"
[Wed Jun 12 12:55:02 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.022
[Wed Jun 12 12:55:02 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 9.61"
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src32.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src32.csv
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src32_1.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src32.csv
[Wed Jun 12 12:55:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Wed Jun 12 12:55:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src32.csv
[Wed Jun 12 12:55:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Wed Jun 12 12:55:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src32.csv
[Wed Jun 12 12:55:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:29 2013] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 13.487885 pixels away
[Wed Jun 12 12:55:29 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:29 2013] Assessing source extent using major
[Wed Jun 12 12:55:29 2013] Source does appear to be extended
[Wed Jun 12 12:55:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 15:10:12 2013] XMMSAS src. selection expression = ellipse(30897.281586, 20124.558624, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 15:10:12 2013] Not overwriting source region fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52_src.reg
[Wed Jun 12 15:10:12 2013] Extracting stamp from image fullrun_mos2_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (318, 194) - (393, 269)
[Wed Jun 12 15:10:12 2013] XMMSAS bgd. selection expression = annulus(30897.281586, 20124.558624, 1087.500000, 2175.000000, X, Y)
[Wed Jun 12 15:10:12 2013] Writing fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52.gif
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52_src.evt and ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52_bgd.evt exist, delete to re-create
[Wed Jun 12 15:10:13 2013] Mean detx,y = (-4099.18, -7221.50) 
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52_src.img and ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52_bgd.img exist, delete to re-create
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52_bgd.pi exist, delete to re-create
[Wed Jun 12 15:10:13 2013] Setting source spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Wed Jun 12 15:10:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52_bgd.lc exist, delete to re-create
[Wed Jun 12 15:10:17 2013] Not generating rmf since there are only 91 counts
[Wed Jun 12 15:10:17 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:10:17 2013] fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52.arf exists, delete to re-create
[Wed Jun 12 15:12:42 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:42 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 583.00
[Wed Jun 12 15:12:42 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52_bgd.pi.gz = 2484.00
[Wed Jun 12 15:12:42 2013] Got source and background scale factors 1023000.000000, 5785865.000000
[Wed Jun 12 15:12:42 2013] User source parameters:
  Position = (355.7, 231.9) = 18 13 55.77 -32 53 39.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 143.8 +/- 25.2
  Background aperture counts = 439.2
  Rate = 0.001 +/- 0.0002

[Wed Jun 12 15:12:42 2013] Updating counts from extracted products
[Wed Jun 12 15:12:42 2013] Set source signif. to 143.80/20.96 = 6.86
[Wed Jun 12 15:12:44 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:44 2013] Using photon index=1.80, rate=0.00118, arf fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52.arf
[Wed Jun 12 15:12:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:44 2013] Updating source flux to 2e-14
[Wed Jun 12 15:12:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:12:54 2013] xmm0604860301/analysis//spectral/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete