[Wed Jun 12 12:53:19 2013] Detection parameters:
  Position = (325.0, 307.0) = 18 14 6.38 -32 48 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.4 +/- 19.8
  Background counts = 83.2
  Rate = 0.0008 +/- 0.0002

[Wed Jun 12 12:53:19 2013] Off-axis axis estimate = 2.03'
[Wed Jun 12 12:54:03 2013] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:03 2013] Initial guess for spatial extent in simple fitting = 7.44"
[Wed Jun 12 12:54:03 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Wed Jun 12 12:54:03 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 7.44"
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src44.ximg exists
[Wed Jun 12 12:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src44.csv
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src44_1.ximg exists
[Wed Jun 12 12:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src44.csv
[Wed Jun 12 12:54:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:05 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Wed Jun 12 12:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src44.csv
[Wed Jun 12 12:54:05 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Wed Jun 12 12:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src44.csv
[Wed Jun 12 12:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:39 2013] Warning, spatial fit 44 centroid is now closest to src. 44
[Wed Jun 12 12:54:39 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:39 2013] Assessing source extent using major
[Wed Jun 12 12:54:39 2013] Source does appear to be extended
[Wed Jun 12 12:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:39 2013] Source is confused with source 44
[Wed Jun 12 12:55:02 2013] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:55:02 2013] Initial guess for spatial extent in simple fitting = 7.44"
[Wed Jun 12 12:55:02 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Wed Jun 12 12:55:02 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 7.44"
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src39.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src39.csv
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src39_1.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src39.csv
[Wed Jun 12 12:55:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Wed Jun 12 12:55:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Wed Jun 12 12:55:04 2013] Fit fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Wed Jun 12 12:55:29 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 16.008014 pixels away
[Wed Jun 12 12:55:29 2013] Spatial fit model total counts = 2783.480000, observed total counts = 2580.000000
[Wed Jun 12 12:55:29 2013] Offset between fit and detection position for source 45 = 8.417273 pixels
[Wed Jun 12 12:55:29 2013] 2205.279000 total counts/ 2011.280000 bgd. counts: snr = 4.325768
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 8.417273 pixels
  Position = (331.2, 301.4) = 18 14 4.23 -32 48 37.7
  Extent = 14.0 (14.0-14.0)", rotation angle = 0
  Source counts = 194.0 +/- 47.0
  Background counts = 2011.3
  Rate = 0.002 +/- 0.0004
[Wed Jun 12 12:55:29 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:29 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 12:55:29 2013] Source does appear to be extended
[Wed Jun 12 12:55:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 15:10:12 2013] XMMSAS src. selection expression = ellipse(28769.008000, 26170.652000, 842.406024, 842.406024, 0.000000, X, Y)
[Wed Jun 12 15:10:12 2013] Not overwriting source region fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45_src.reg
[Wed Jun 12 15:10:12 2013] Extracting stamp from image fullrun_mos2_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (283, 253) - (380, 350)
[Wed Jun 12 15:10:12 2013] XMMSAS bgd. selection expression = annulus(28769.008000, 26170.652000, 1404.010040, 2808.020081, X, Y) && !ellipse(27190.214600, 27426.955200, 1211.198435, 1211.198435, 0.000000, X, Y) && !ellipse(25411.255615, 28567.193359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28146.190674, 27193.353760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28604.630000, 27860.396000, 1179.840034, 1179.840034, 0.000000, X, Y) && !ellipse(28646.730072, 28390.556915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29626.840000, 28569.680000, 1365.776039, 1365.776039, 0.000000, X, Y)
[Wed Jun 12 15:10:12 2013] Writing fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45.gif
[Wed Jun 12 15:10:14 2013] ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45_src.evt and ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45_bgd.evt exist, delete to re-create
[Wed Jun 12 15:10:14 2013] Mean detx,y = (-1547.07, -1201.90) 
[Wed Jun 12 15:10:14 2013] ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45_src.img and ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45_bgd.img exist, delete to re-create
[Wed Jun 12 15:10:14 2013] ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45_bgd.pi exist, delete to re-create
[Wed Jun 12 15:10:14 2013] Setting source spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed Jun 12 15:10:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Wed Jun 12 15:10:14 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45_bgd.lc exist, delete to re-create
[Wed Jun 12 15:10:17 2013] fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45.rmf exists, delete to re-create
[Wed Jun 12 15:10:17 2013] fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45.arf exists, delete to re-create
[Wed Jun 12 15:12:42 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:42 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 1470.00
[Wed Jun 12 15:12:42 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45_bgd.pi.gz = 3501.00
[Wed Jun 12 15:12:42 2013] Got source and background scale factors 2233600.000000, 5501622.000000
[Wed Jun 12 15:12:42 2013] User source parameters:
  Position = (331.2, 301.4) = 18 14 4.23 -32 48 37.7
  Extent = 14.0 (14.0-14.0)", rotation angle = 0
  Source aperture counts = 48.6 +/- 39.4
  Background aperture counts = 1421.4
  Rate = 0.0004 +/- 0.0003

[Wed Jun 12 15:12:44 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:44 2013] Using photon index=1.80, rate=0.00159, arf fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45.arf
[Wed Jun 12 15:12:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:44 2013] Updating source flux to 1.7e-14
[Wed Jun 12 15:12:49 2013] Flag c found in src. 45 procflags, skipping spectral fitting
[Wed Jun 12 15:12:54 2013] xmm0604860301/analysis//spectral/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete