[Wed Jun 12 12:53:19 2013] Detection parameters:
  Position = (324.1, 313.1) = 18 14 6.70 -32 47 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.1 +/- 22.9
  Background counts = 80.6
  Rate = 0.001 +/- 0.0002

[Wed Jun 12 12:53:19 2013] Off-axis axis estimate = 2.14'
[Wed Jun 12 12:54:03 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:03 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Wed Jun 12 12:54:03 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.809
[Wed Jun 12 12:54:03 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 7.50"
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src30.ximg exists
[Wed Jun 12 12:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src30.csv
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Jun 12 12:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src30.csv
[Wed Jun 12 12:54:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:05 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Jun 12 12:54:05 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Jun 12 12:54:05 2013] Fit fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Wed Jun 12 12:54:39 2013] Warning, spatial fit 30 centroid is now closest to src. 42
[Wed Jun 12 12:54:39 2013] Source 44 is offset by 7.179801 and -3.772348 pixels which is larger than
2 X fitted extent = 3.153163 x 3.153163, not incorporating fit results
[Wed Jun 12 12:54:39 2013] Source 44 is offset by 5.919640 and -0.582003 pixels which is larger than
2 X fitted extent = 3.728400 x 3.728400, not incorporating fit results
[Wed Jun 12 12:54:39 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:39 2013] Assessing source extent using major
[Wed Jun 12 12:54:39 2013] Source does appear to be extended
[Wed Jun 12 12:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:39 2013] Source is confused with source 42
[Wed Jun 12 12:54:39 2013] Source is confused with source 45
[Wed Jun 12 12:55:02 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:55:02 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Wed Jun 12 12:55:02 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.809
[Wed Jun 12 12:55:02 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 7.50"
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src27.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src27.csv
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src27.csv
[Wed Jun 12 12:55:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Jun 12 12:55:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed Jun 12 12:55:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Jun 12 12:55:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed Jun 12 12:55:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:29 2013] Warning, spatial fit 27 centroid is now closest to src. 45
[Wed Jun 12 12:55:29 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:29 2013] Assessing source extent using major
[Wed Jun 12 12:55:29 2013] Source does appear to be extended
[Wed Jun 12 12:55:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 15:10:12 2013] XMMSAS src. selection expression = ellipse(28146.190674, 27193.353760, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 15:10:12 2013] Not overwriting source region fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44_src.reg
[Wed Jun 12 15:10:12 2013] Extracting stamp from image fullrun_mos2_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (287, 276) - (362, 351)
[Wed Jun 12 15:10:12 2013] XMMSAS bgd. selection expression = annulus(28146.190674, 27193.353760, 1087.500000, 2175.000000, X, Y) && !ellipse(27190.214600, 27426.955200, 1211.198435, 1211.198435, 0.000000, X, Y) && !ellipse(25411.255615, 28567.193359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28604.630000, 27860.396000, 1179.840034, 1179.840034, 0.000000, X, Y) && !ellipse(28646.730072, 28390.556915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28769.008000, 26170.652000, 1123.208032, 1123.208032, 0.000000, X, Y) && !ellipse(29626.840000, 28569.680000, 1365.776039, 1365.776039, 0.000000, X, Y)
[Wed Jun 12 15:10:12 2013] Writing fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44.gif
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44_src.evt and ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44_bgd.evt exist, delete to re-create
[Wed Jun 12 15:10:13 2013] Mean detx,y = (-766.44, -227.23) 
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44_src.img and ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44_bgd.img exist, delete to re-create
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44_bgd.pi exist, delete to re-create
[Wed Jun 12 15:10:13 2013] Setting source spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed Jun 12 15:10:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44_bgd.lc exist, delete to re-create
[Wed Jun 12 15:10:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 15:10:17 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:10:17 2013] fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44.arf exists, delete to re-create
[Wed Jun 12 15:12:41 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:41 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 2225.00
[Wed Jun 12 15:12:41 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44_bgd.pi.gz = 2054.00
[Wed Jun 12 15:12:41 2013] Got source and background scale factors 1188300.000000, 2855532.000000
[Wed Jun 12 15:12:41 2013] User source parameters:
  Position = (324.1, 313.1) = 18 14 6.70 -32 47 46.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1370.2 +/- 48.2
  Background aperture counts = 854.8
  Rate = 0.01 +/- 0.0004

[Wed Jun 12 15:12:41 2013] Updating counts from extracted products
[Wed Jun 12 15:12:41 2013] Set source signif. to 1370.25/29.24 = 46.87
[Wed Jun 12 15:12:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:43 2013] Using photon index=1.80, rate=0.0112, arf fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44.arf
[Wed Jun 12 15:12:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:43 2013] Updating source flux to 1.3e-13
[Wed Jun 12 15:12:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:12:54 2013] xmm0604860301/analysis//spectral/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete