[Wed Jun 12 12:53:19 2013] Detection parameters:
  Position = (324.4, 323.0) = 18 14 6.59 -32 47 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.1 +/- 21.1
  Background counts = 77.4
  Rate = 0.001 +/- 0.0002

[Wed Jun 12 12:53:19 2013] Off-axis axis estimate = 2.59'
[Wed Jun 12 12:54:03 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:03 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Wed Jun 12 12:54:03 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965
[Wed Jun 12 12:54:03 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 7.72"
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src31.ximg exists
[Wed Jun 12 12:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src31.csv
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src31_1.ximg exists
[Wed Jun 12 12:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src31.csv
[Wed Jun 12 12:54:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:05 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Wed Jun 12 12:54:05 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Jun 12 12:54:05 2013] Fit fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Wed Jun 12 12:54:39 2013] Spatial fit model total counts = 4992.420000, observed total counts = 4968.000000
[Wed Jun 12 12:54:39 2013] Offset between fit and detection position for source 42 = 5.393210 pixels
[Wed Jun 12 12:54:39 2013] Warning, changing simple spatial fit ID from 31 to 30
[Wed Jun 12 12:54:39 2013] 3345.900000 total counts/ 2190.540000 bgd. counts: snr = 24.685489
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 5.393210 pixels
  Position = (329.3, 320.8) = 18 14 4.89 -32 47 13.2
  Extent = 14.7 (14.7-14.7)", rotation angle = 0
  Source counts = 1155.4 +/- 57.8
  Background counts = 2190.5
  Rate = 0.009 +/- 0.0005
[Wed Jun 12 12:54:39 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:39 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 12:54:39 2013] Source does appear to be extended
[Wed Jun 12 12:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:39 2013] Source is confused with source 44
[Wed Jun 12 12:55:02 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:55:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 12 12:55:02 2013] Initial guess for spatial extent in simple fitting = 14.75"
[Wed Jun 12 12:55:02 2013] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.057
[Wed Jun 12 12:55:02 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 14.75"
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src28.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src28.csv
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src28.csv
[Wed Jun 12 12:55:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Jun 12 12:55:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src28.csv
[Wed Jun 12 12:55:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Jun 12 12:55:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src28.csv
[Wed Jun 12 12:55:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:29 2013] Warning, spatial fit 28 centroid is now closest to src. 40
[Wed Jun 12 12:55:29 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:29 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 12:55:29 2013] Source does appear to be extended
[Wed Jun 12 12:55:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 15:10:12 2013] Counts = 1155.360000, rescaling region sizes by 2.000000
[Wed Jun 12 15:10:12 2013] XMMSAS src. selection expression = ellipse(28604.630000, 27860.396000, 1769.760051, 1769.760051, 0.000000, X, Y)
[Wed Jun 12 15:10:12 2013] Not overwriting source region fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42_src.reg
[Wed Jun 12 15:10:12 2013] Extracting stamp from image fullrun_mos2_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (228, 219) - (431, 423)
[Wed Jun 12 15:10:12 2013] XMMSAS bgd. selection expression = annulus(28604.630000, 27860.396000, 5899.200170, 11798.400339, X, Y) && !ellipse(27190.214600, 27426.955200, 1211.198435, 1211.198435, 0.000000, X, Y) && !ellipse(24751.240000, 29058.510000, 1132.032033, 1132.032033, 0.000000, X, Y) && !ellipse(34513.529724, 34399.390015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15976.820084, 28417.417847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39076.560800, 21504.344600, 525.385615, 279.656008, 106.941709, X, Y) && !ellipse(20352.164993, 15280.500153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25197.879820, 19056.515800, 494.694414, 310.304809, 0.000000, X, Y) && !ellipse(22943.849274, 16192.656708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36514.450400, 28967.187600, 307.636809, 307.636809, 0.000000, X, Y) && !ellipse(18522.990524, 27261.736694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30315.564667, 15753.692749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25411.255615, 28567.193359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33241.106934, 36600.587189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34763.060000, 26374.423200, 354.322410, 354.322410, 0.000000, X, Y) && !ellipse(26228.489563, 18400.247192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28204.038452, 16750.342957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18571.020004, 20784.540497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29972.919861, 16794.720444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19507.259003, 27946.009430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20526.993362, 29776.877808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28146.190674, 27193.353760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35395.949951, 33339.284607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30897.281586, 20124.558624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32693.645203, 39179.552551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.923431, 37835.751953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28646.730072, 28390.556915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38541.894165, 38076.900299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28769.008000, 26170.652000, 1123.208032, 1123.208032, 0.000000, X, Y) && !ellipse(19475.997700, 37996.668600, 644.036019, 644.036019, 0.000000, X, Y) && !ellipse(30224.497162, 40458.727081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29626.840000, 28569.680000, 1365.776039, 1365.776039, 0.000000, X, Y) && !ellipse(17681.602580, 20422.050000, 764.076822, 764.076822, 0.000000, X, Y)
[Wed Jun 12 15:10:12 2013] Writing fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42.gif
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42_src.evt and ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42_bgd.evt exist, delete to re-create
[Wed Jun 12 15:10:13 2013] Mean detx,y = (-195.51, 15.04) 
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42_src.img and ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42_bgd.img exist, delete to re-create
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42_bgd.pi exist, delete to re-create
[Wed Jun 12 15:10:13 2013] Setting source spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Wed Jun 12 15:10:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42_bgd.lc exist, delete to re-create
[Wed Jun 12 15:10:17 2013] fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42.rmf exists, delete to re-create
[Wed Jun 12 15:10:17 2013] fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42.arf exists, delete to re-create
[Wed Jun 12 15:12:41 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:41 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 45635.00
[Wed Jun 12 15:12:41 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42_bgd.pi.gz = 89348.00
[Wed Jun 12 15:12:41 2013] Got source and background scale factors 9349628.000000, 217919635.000000
[Wed Jun 12 15:12:41 2013] User source parameters:
  Position = (329.3, 320.8) = 18 14 4.89 -32 47 13.2
  Extent = 14.7 (14.7-14.7)", rotation angle = 0
  Source aperture counts = 41801.6 +/- 214.6
  Background aperture counts = 3833.4
  Rate = 0.3 +/- 0.002

[Wed Jun 12 15:12:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:43 2013] Using photon index=1.80, rate=0.00945, arf fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42.arf
[Wed Jun 12 15:12:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:43 2013] Updating source flux to 9.7e-14
[Wed Jun 12 15:12:49 2013] Flag c found in src. 42 procflags, skipping spectral fitting
[Wed Jun 12 15:12:54 2013] xmm0604860301/analysis//spectral/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete