[Wed Jun 12 12:53:18 2013] Detection parameters:
  Position = (345.3, 332.8) = 18 13 59.38 -32 46 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.8 +/- 16.1
  Background counts = 72.0
  Rate = 0.0007 +/- 0.0001

[Wed Jun 12 12:53:19 2013] Off-axis axis estimate = 4.22'
[Wed Jun 12 12:54:03 2013] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:03 2013] Initial guess for spatial extent in simple fitting = 8.54"
[Wed Jun 12 12:54:03 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.031
[Wed Jun 12 12:54:03 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 8.54"
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src51.ximg exists
[Wed Jun 12 12:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src51.csv
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src51_1.ximg exists
[Wed Jun 12 12:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src51.csv
[Wed Jun 12 12:54:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:05 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Wed Jun 12 12:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed Jun 12 12:54:05 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Wed Jun 12 12:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed Jun 12 12:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:39 2013] Warning, spatial fit 51 centroid is now closest to src. 39
[Wed Jun 12 12:54:39 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:39 2013] Assessing source extent using major
[Wed Jun 12 12:54:39 2013] Source does appear to be extended
[Wed Jun 12 12:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:02 2013] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:55:02 2013] Initial guess for spatial extent in simple fitting = 8.54"
[Wed Jun 12 12:55:02 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.031
[Wed Jun 12 12:55:02 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 8.54"
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src44.ximg exists
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src44_1.ximg exists
[Wed Jun 12 12:55:03 2013] Fit fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src44 appears to have run properly
[Wed Jun 12 12:55:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Wed Jun 12 12:55:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Wed Jun 12 12:55:04 2013] Fit fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Wed Jun 12 12:55:29 2013] Spatial fit model total counts = 2780.410000, observed total counts = 2482.000000
[Wed Jun 12 12:55:29 2013] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 12:55:29 2013] Spatial fit model total counts = 1006.150000, observed total counts = 928.000000
[Wed Jun 12 12:55:29 2013] Offset between fit and detection position for source 40 = 5.731779 pixels
[Wed Jun 12 12:55:29 2013] 1025.796000 total counts/ 858.968000 bgd. counts: snr = 5.692204
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 5.731779 pixels
  Position = (341.1, 328.9) = 18 14 0.84 -32 46 37.7
  Extent = 17.1 (17.0-34.1)", rotation angle = 0
  Source counts = 166.8 +/- 32.0
  Background counts = 859.0
  Rate = 0.001 +/- 0.0003
[Wed Jun 12 12:55:29 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:29 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 12:55:29 2013] Source does appear to be extended
[Wed Jun 12 12:55:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:29 2013] Source is confused with source 41
[Wed Jun 12 15:10:12 2013] XMMSAS src. selection expression = ellipse(29626.840000, 28569.680000, 1024.332029, 1024.332029, 0.000000, X, Y)
[Wed Jun 12 15:10:12 2013] Not overwriting source region fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40_src.reg
[Wed Jun 12 15:10:12 2013] Extracting stamp from image fullrun_mos2_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (282, 270) - (400, 388)
[Wed Jun 12 15:10:12 2013] XMMSAS bgd. selection expression = annulus(29626.840000, 28569.680000, 1707.220049, 3414.440098, X, Y) && !ellipse(27190.214600, 27426.955200, 1211.198435, 1211.198435, 0.000000, X, Y) && !ellipse(25411.255615, 28567.193359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28146.190674, 27193.353760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28604.630000, 27860.396000, 1179.840034, 1179.840034, 0.000000, X, Y) && !ellipse(28646.730072, 28390.556915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28769.008000, 26170.652000, 1123.208032, 1123.208032, 0.000000, X, Y)
[Wed Jun 12 15:10:12 2013] Writing fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40.gif
[Wed Jun 12 15:10:14 2013] ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40_src.evt and ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40_bgd.evt exist, delete to re-create
[Wed Jun 12 15:10:14 2013] Mean detx,y = (-2330.35, 1199.84) 
[Wed Jun 12 15:10:14 2013] ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40_src.img and ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40_bgd.img exist, delete to re-create
[Wed Jun 12 15:10:14 2013] ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40_bgd.pi exist, delete to re-create
[Wed Jun 12 15:10:14 2013] Setting source spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed Jun 12 15:10:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Wed Jun 12 15:10:14 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40_bgd.lc exist, delete to re-create
[Wed Jun 12 15:10:17 2013] fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40.rmf exists, delete to re-create
[Wed Jun 12 15:10:17 2013] fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40.arf exists, delete to re-create
[Wed Jun 12 15:12:43 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:43 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 1640.00
[Wed Jun 12 15:12:43 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40_bgd.pi.gz = 3185.00
[Wed Jun 12 15:12:43 2013] Got source and background scale factors 3193836.000000, 5490570.000000
[Wed Jun 12 15:12:43 2013] User source parameters:
  Position = (341.1, 328.9) = 18 14 0.84 -32 46 37.7
  Extent = 17.1 (17.0-34.1)", rotation angle = 0
  Source aperture counts = -212.7 +/- 41.5
  Background aperture counts = 1852.7
  Rate = -0.002 +/- 0.0003

[Wed Jun 12 15:12:44 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:44 2013] Using photon index=1.80, rate=0.00136, arf fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40.arf
[Wed Jun 12 15:12:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:44 2013] Updating source flux to 1.5e-14
[Wed Jun 12 15:12:49 2013] Flag p found in src. 40 procflags, skipping spectral fitting
[Wed Jun 12 15:12:49 2013] Flag c found in src. 40 procflags, skipping spectral fitting
[Wed Jun 12 15:12:54 2013] xmm0604860301/analysis//spectral/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete