[Wed Jun 12 12:53:18 2013] Detection parameters:
  Position = (239.1, 135.9) = 18 14 36.08 -33 0 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.2 +/- 20.9
  Background counts = 61.3
  Rate = 0.002 +/- 0.0002

[Wed Jun 12 12:53:19 2013] Off-axis axis estimate = 12.54'
[Wed Jun 12 12:54:03 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:03 2013] Initial guess for spatial extent in simple fitting = 12.70"
[Wed Jun 12 12:54:03 2013] source mask rpix=2.9, npix_max = 46, mask sum = 38, frac = 0.812
[Wed Jun 12 12:54:03 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 12.70"
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src25.ximg exists
[Wed Jun 12 12:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src25.csv
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed Jun 12 12:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src25.csv
[Wed Jun 12 12:54:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:05 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed Jun 12 12:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed Jun 12 12:54:05 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed Jun 12 12:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed Jun 12 12:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:39 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 15.949778 pixels away
[Wed Jun 12 12:54:39 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:39 2013] Assessing source extent using major
[Wed Jun 12 12:54:39 2013] Source does appear to be extended
[Wed Jun 12 12:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:02 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:55:02 2013] Initial guess for spatial extent in simple fitting = 12.70"
[Wed Jun 12 12:55:02 2013] source mask rpix=2.9, npix_max = 46, mask sum = 38, frac = 0.812
[Wed Jun 12 12:55:02 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 12.70"
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src24.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src24.csv
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src24_1.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src24.csv
[Wed Jun 12 12:55:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Wed Jun 12 12:55:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Wed Jun 12 12:55:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Wed Jun 12 12:55:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Wed Jun 12 12:55:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:29 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 16.553213 pixels away
[Wed Jun 12 12:55:29 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:29 2013] Assessing source extent using major
[Wed Jun 12 12:55:29 2013] Source does appear to be extended
[Wed Jun 12 12:55:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 15:10:12 2013] XMMSAS src. selection expression = ellipse(20750.807022, 11775.244186, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 15:10:12 2013] Not overwriting source region fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36_src.reg
[Wed Jun 12 15:10:12 2013] Extracting stamp from image fullrun_mos2_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (202, 98) - (277, 173)
[Wed Jun 12 15:10:12 2013] XMMSAS bgd. selection expression = annulus(20750.807022, 11775.244186, 1087.500000, 2175.000000, X, Y) && !ellipse(23160.961639, 13166.486176, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 15:10:12 2013] Writing fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36.gif
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36_src.evt and ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36_bgd.evt exist, delete to re-create
[Wed Jun 12 15:10:13 2013] Mean detx,y = (5584.77, -15947.30) 
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36_src.img and ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36_bgd.img exist, delete to re-create
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36_bgd.pi exist, delete to re-create
[Wed Jun 12 15:10:13 2013] Setting source spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed Jun 12 15:10:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36_bgd.lc exist, delete to re-create
[Wed Jun 12 15:10:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 15:10:17 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:10:17 2013] fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36.arf exists, delete to re-create
[Wed Jun 12 15:12:41 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:41 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 505.00
[Wed Jun 12 15:12:41 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36_bgd.pi.gz = 2080.00
[Wed Jun 12 15:12:41 2013] Got source and background scale factors 1097420.000000, 6166706.000000
[Wed Jun 12 15:12:41 2013] User source parameters:
  Position = (239.1, 135.9) = 18 14 36.08 -33 0 38.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 134.8 +/- 23.5
  Background aperture counts = 370.2
  Rate = 0.001 +/- 0.0002

[Wed Jun 12 15:12:41 2013] Updating counts from extracted products
[Wed Jun 12 15:12:41 2013] Set source signif. to 134.85/19.24 = 7.01
[Wed Jun 12 15:12:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:43 2013] Using photon index=1.80, rate=0.0011, arf fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36.arf
[Wed Jun 12 15:12:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:43 2013] Updating source flux to 4.2e-14
[Wed Jun 12 15:12:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:12:54 2013] xmm0604860301/analysis//spectral/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete