[Wed Jun 12 12:53:18 2013] Detection parameters:
  Position = (302.0, 212.1) = 18 14 14.31 -32 55 6.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 189.3 +/- 20.4
  Background counts = 78.1
  Rate = 0.002 +/- 0.0003

[Wed Jun 12 12:53:19 2013] Off-axis axis estimate = 6.27'
[Wed Jun 12 12:54:03 2013] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:03 2013] Initial guess for spatial extent in simple fitting = 9.56"
[Wed Jun 12 12:54:03 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.236
[Wed Jun 12 12:54:03 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 9.56"
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src18.ximg exists
[Wed Jun 12 12:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src18.csv
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Jun 12 12:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src18.csv
[Wed Jun 12 12:54:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:05 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Jun 12 12:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Jun 12 12:54:05 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Jun 12 12:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Jun 12 12:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:39 2013] Spatial fit model total counts = 1006.270000, observed total counts = 902.000000
[Wed Jun 12 12:54:39 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 12:54:39 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:39 2013] Assessing source extent using major
[Wed Jun 12 12:54:39 2013] Source does appear to be extended
[Wed Jun 12 12:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:02 2013] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:55:02 2013] Initial guess for spatial extent in simple fitting = 9.56"
[Wed Jun 12 12:55:02 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.236
[Wed Jun 12 12:55:02 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 9.56"
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src18.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src18.csv
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src18.csv
[Wed Jun 12 12:55:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed Jun 12 12:55:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Jun 12 12:55:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Jun 12 12:55:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Jun 12 12:55:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:29 2013] Spatial fit model total counts = 1002.280000, observed total counts = 902.000000
[Wed Jun 12 12:55:29 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 12:55:29 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:29 2013] Assessing source extent using major
[Wed Jun 12 12:55:29 2013] Source does appear to be extended
[Wed Jun 12 12:55:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 15:10:12 2013] XMMSAS src. selection expression = ellipse(26228.489563, 18400.247192, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 15:10:12 2013] Not overwriting source region fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31_src.reg
[Wed Jun 12 15:10:12 2013] Extracting stamp from image fullrun_mos2_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (265, 175) - (340, 250)
[Wed Jun 12 15:10:12 2013] XMMSAS bgd. selection expression = annulus(26228.489563, 18400.247192, 1087.500000, 2175.000000, X, Y) && !ellipse(25197.879820, 19056.515800, 494.694414, 310.304809, 0.000000, X, Y) && !ellipse(28204.038452, 16750.342957, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 15:10:12 2013] Writing fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31.gif
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Wed Jun 12 15:10:13 2013] Mean detx,y = (540.34, -9110.06) 
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31_src.img and ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Wed Jun 12 15:10:13 2013] Setting source spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Jun 12 15:10:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed Jun 12 15:10:13 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Wed Jun 12 15:10:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 15:10:17 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:10:17 2013] fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31.arf exists, delete to re-create
[Wed Jun 12 15:12:40 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:40 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 660.00
[Wed Jun 12 15:12:40 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31_bgd.pi.gz = 3865.00
[Wed Jun 12 15:12:40 2013] Got source and background scale factors 1215060.000000, 9758669.000000
[Wed Jun 12 15:12:40 2013] User source parameters:
  Position = (302.0, 212.1) = 18 14 14.31 -32 55 6.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 178.8 +/- 26.7
  Background aperture counts = 481.2
  Rate = 0.001 +/- 0.0002

[Wed Jun 12 15:12:40 2013] Updating counts from extracted products
[Wed Jun 12 15:12:40 2013] Set source signif. to 178.77/21.94 = 8.15
[Wed Jun 12 15:12:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:43 2013] Using photon index=1.80, rate=0.00146, arf fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31.arf
[Wed Jun 12 15:12:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:43 2013] Updating source flux to 2.6e-14
[Wed Jun 12 15:12:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:12:54 2013] xmm0604860301/analysis//spectral/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete