[Wed Jun 12 12:53:17 2013] Detection parameters:
  Position = (313.3, 315.9) = 18 14 10.43 -32 47 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48233.9 +/- 261.4
  Background counts = 84.9
  Rate = 0.4 +/- 0.002

[Wed Jun 12 12:53:19 2013] Off-axis axis estimate = 1.66'
[Wed Jun 12 12:54:03 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:03 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Wed Jun 12 12:54:03 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Wed Jun 12 12:54:03 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Wed Jun 12 12:54:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 12 12:54:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src1.csv
[Wed Jun 12 12:54:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 12 12:54:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src1.csv
[Wed Jun 12 12:54:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 12 12:54:04 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 12 12:54:04 2013] Fit fullrun_mos2_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 12 12:54:39 2013] Spatial fit model total counts = 45827.600000, observed total counts = 42798.000000
[Wed Jun 12 12:54:39 2013] Offset between fit and detection position for source 1 = 0.200281 pixels
[Wed Jun 12 12:54:39 2013] 46053.500000 total counts/ 14254.200000 bgd. counts: snr = 266.345974
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.200281 pixels
  Position = (313.1, 315.8) = 18 14 10.50 -32 47 34.9
  Extent = 5.0 (5.0-5.1)", rotation angle = 0
  Source counts = 31799.3 +/- 214.6
  Background counts = 14254.2
  Rate = 0.3 +/- 0.002
[Wed Jun 12 12:54:39 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:39 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 12:54:39 2013] Source does appear to be extended
[Wed Jun 12 12:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:02 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:55:02 2013] Initial guess for spatial extent in simple fitting = 5.05"
[Wed Jun 12 12:55:02 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.088
[Wed Jun 12 12:55:02 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.05"
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src1.csv
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src1.csv
[Wed Jun 12 12:55:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun 12 12:55:03 2013] fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 12 12:55:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun 12 12:55:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:29 2013] Spatial fit model total counts = 47593.800000, observed total counts = 42798.000000
[Wed Jun 12 12:55:29 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 12:55:29 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:29 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 12:55:29 2013] Source does appear to be extended
[Wed Jun 12 12:55:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 15:10:11 2013] Counts = 31799.300000, rescaling region sizes by 3.000000
[Wed Jun 12 15:10:11 2013] XMMSAS src. selection expression = ellipse(27190.214600, 27426.955200, 908.398826, 908.398826, 0.000000, X, Y)
[Wed Jun 12 15:10:11 2013] Not overwriting source region fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 12 15:10:11 2013] Extracting stamp from image fullrun_mos2_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (261, 264) - (365, 368)
[Wed Jun 12 15:10:11 2013] XMMSAS bgd. selection expression = annulus(27190.214600, 27426.955200, 4541.994131, 9083.988261, X, Y) && !ellipse(24751.240000, 29058.510000, 1132.032033, 1132.032033, 0.000000, X, Y) && !ellipse(34513.529724, 34399.390015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25197.879820, 19056.515800, 494.694414, 310.304809, 0.000000, X, Y) && !ellipse(36514.450400, 28967.187600, 307.636809, 307.636809, 0.000000, X, Y) && !ellipse(18522.990524, 27261.736694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25411.255615, 28567.193359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33241.106934, 36600.587189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34763.060000, 26374.423200, 354.322410, 354.322410, 0.000000, X, Y) && !ellipse(26228.489563, 18400.247192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18571.020004, 20784.540497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19507.259003, 27946.009430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20526.993362, 29776.877808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28146.190674, 27193.353760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28604.630000, 27860.396000, 1179.840034, 1179.840034, 0.000000, X, Y) && !ellipse(35395.949951, 33339.284607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30897.281586, 20124.558624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28646.730072, 28390.556915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28769.008000, 26170.652000, 1123.208032, 1123.208032, 0.000000, X, Y) && !ellipse(29626.840000, 28569.680000, 1365.776039, 1365.776039, 0.000000, X, Y) && !ellipse(17681.602580, 20422.050000, 764.076822, 764.076822, 0.000000, X, Y)
[Wed Jun 12 15:10:11 2013] Writing fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1.gif
[Wed Jun 12 15:10:12 2013] ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0604860301/products/events/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Jun 12 15:10:12 2013] Mean detx,y = (7.22, -55.33) 
[Wed Jun 12 15:10:12 2013] ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1_src.img and ../../xmm0604860301/products/images/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Jun 12 15:10:12 2013] ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Jun 12 15:10:12 2013] Setting source spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 12 15:10:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 12 15:10:12 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Jun 12 15:10:17 2013] fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Wed Jun 12 15:10:17 2013] fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Wed Jun 12 15:12:38 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:38 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 44218.00
[Wed Jun 12 15:12:38 2013] Total counts from fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 27961.00
[Wed Jun 12 15:12:38 2013] Got source and background scale factors 2389716.000000, 64753399.000000
[Wed Jun 12 15:12:38 2013] User source parameters:
  Position = (313.1, 315.8) = 18 14 10.50 -32 47 34.9
  Extent = 5.0 (5.0-5.1)", rotation angle = 0
  Source aperture counts = 43186.1 +/- 211.3
  Background aperture counts = 1031.9
  Rate = 0.4 +/- 0.002

[Wed Jun 12 15:12:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:43 2013] Using photon index=1.80, rate=0.26, arf fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1.arf
[Wed Jun 12 15:12:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:43 2013] Updating source flux to 3.1e-12
[Wed Jun 12 15:12:49 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed Jun 12 15:12:54 2013] xmm0604860301/analysis//spectral/fullrun_mos2_xmm0604860301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete