[Wed Jun 12 12:53:15 2013] Detection parameters:
  Position = (370.0, 481.0) = 18 13 50.91 -32 35 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.7 +/- 18.2
  Background counts = 76.1
  Rate = 0.001 +/- 0.0001

[Wed Jun 12 12:53:16 2013] Off-axis axis estimate = 14.22'
[Wed Jun 12 12:54:02 2013] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 12 12:54:02 2013] Initial guess for spatial extent in simple fitting = 13.54"
[Wed Jun 12 12:54:02 2013] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.226
[Wed Jun 12 12:54:02 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 13.54"
[Wed Jun 12 12:54:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src22.ximg exists
[Wed Jun 12 12:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src22.csv
[Wed Jun 12 12:54:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed Jun 12 12:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src22.csv
[Wed Jun 12 12:54:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:03 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed Jun 12 12:54:03 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Jun 12 12:54:03 2013] Fit fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Wed Jun 12 12:54:31 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.512495 pixels away
[Wed Jun 12 12:54:31 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:31 2013] Assessing source extent using major
[Wed Jun 12 12:54:31 2013] Source does appear to be extended
[Wed Jun 12 12:54:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:01 2013] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:55:01 2013] Initial guess for spatial extent in simple fitting = 13.54"
[Wed Jun 12 12:55:01 2013] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.226
[Wed Jun 12 12:55:01 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 13.54"
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src20.ximg exists
[Wed Jun 12 12:55:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src20.csv
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Jun 12 12:55:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src20.csv
[Wed Jun 12 12:55:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Jun 12 12:55:02 2013] Fit fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Wed Jun 12 12:55:22 2013] Warning, spatial fit 20 centroid is now closest to src. 4
[Wed Jun 12 12:55:22 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:22 2013] Assessing source extent using major
[Wed Jun 12 12:55:22 2013] Source does appear to be extended
[Wed Jun 12 12:55:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 15:10:08 2013] XMMSAS src. selection expression = ellipse(32143.600128, 41797.584015, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 15:10:08 2013] Not overwriting source region fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun 12 15:10:08 2013] Extracting stamp from image fullrun_mos1_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (333, 443) - (408, 518)
[Wed Jun 12 15:10:08 2013] XMMSAS bgd. selection expression = annulus(32143.600128, 41797.584015, 1087.500000, 2175.000000, X, Y) && !ellipse(32671.579254, 39205.486877, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 15:10:08 2013] Writing fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3.gif
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/events/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0604860301/products/events/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Jun 12 15:10:09 2013] Mean detx,y = (14717.27, 4106.12) 
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/images/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3_src.img and ../../xmm0604860301/products/images/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/spectra/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Jun 12 15:10:09 2013] Setting source spectrum file to fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 12 15:10:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Jun 12 15:10:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 15:10:11 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:10:11 2013] fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Wed Jun 12 15:12:37 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:37 2013] Total counts from fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 557.00
[Wed Jun 12 15:12:37 2013] Total counts from fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 3707.00
[Wed Jun 12 15:12:37 2013] Got source and background scale factors 1290276.000000, 10121318.000000
[Wed Jun 12 15:12:37 2013] User source parameters:
  Position = (370.0, 481.0) = 18 13 50.91 -32 35 35.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 84.4 +/- 24.6
  Background aperture counts = 472.6
  Rate = 0.0007 +/- 0.0002

[Wed Jun 12 15:12:37 2013] Updating counts from extracted products
[Wed Jun 12 15:12:37 2013] Set source signif. to 84.43/21.74 = 3.88
[Wed Jun 12 15:12:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:38 2013] Using photon index=1.80, rate=0.000691, arf fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3.arf
[Wed Jun 12 15:12:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:38 2013] Updating source flux to 1.9e-14
[Wed Jun 12 15:12:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:12:49 2013] xmm0604860301/analysis//spectral/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete