[Wed Jun 12 12:53:16 2013] Detection parameters:
  Position = (299.3, 308.4) = 18 14 15.26 -32 48 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.7 +/- 21.1
  Background counts = 100.7
  Rate = 0.001 +/- 0.0002

[Wed Jun 12 12:53:16 2013] Off-axis axis estimate = 0.73'
[Wed Jun 12 12:54:02 2013] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:02 2013] Initial guess for spatial extent in simple fitting = 6.79"
[Wed Jun 12 12:54:02 2013] source mask rpix=1.6, npix_max = 16, mask sum = 12, frac = 0.706
[Wed Jun 12 12:54:02 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 6.79"
[Wed Jun 12 12:54:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src19.ximg exists
[Wed Jun 12 12:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src19.csv
[Wed Jun 12 12:54:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Jun 12 12:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src19.csv
[Wed Jun 12 12:54:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:03 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Jun 12 12:54:03 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Jun 12 12:54:03 2013] Fit fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Jun 12 12:54:31 2013] Spatial fit model total counts = 1978.900000, observed total counts = 1994.000000
[Wed Jun 12 12:54:31 2013] Offset between fit and detection position for source 24 = 8.199258 pixels
[Wed Jun 12 12:54:31 2013] 1998.338000 total counts/ 1709.310000 bgd. counts: snr = 6.990842
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 8.199258 pixels
  Position = (305.2, 314.1) = 18 14 13.20 -32 47 42.6
  Extent = 13.6 (13.5-27.2)", rotation angle = 0
  Source counts = 289.0 +/- 44.7
  Background counts = 1709.3
  Rate = 0.002 +/- 0.0004
[Wed Jun 12 12:54:31 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:31 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 12:54:31 2013] Source does appear to be extended
[Wed Jun 12 12:54:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:31 2013] Source is confused with source 1
[Wed Jun 12 12:55:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:55:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 12 12:55:01 2013] Initial guess for spatial extent in simple fitting = 13.58"
[Wed Jun 12 12:55:01 2013] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.067
[Wed Jun 12 12:55:01 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 13.58"
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src17.ximg exists
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Jun 12 12:55:02 2013] Fit fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src17 appears to have run properly
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Jun 12 12:55:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Jun 12 12:55:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Wed Jun 12 12:55:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:22 2013] Source 24 is offset by -4.504460 and 3.896644 pixels which is larger than
2 X fitted extent = 4.293770 x 4.293770, not incorporating fit results
[Wed Jun 12 12:55:22 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 10.944801 pixels away
[Wed Jun 12 12:55:22 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:22 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 12:55:22 2013] Source does appear to be extended
[Wed Jun 12 12:55:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 15:10:08 2013] XMMSAS src. selection expression = ellipse(26507.878000, 27274.466000, 815.070023, 815.070023, 0.000000, X, Y)
[Wed Jun 12 15:10:08 2013] Not overwriting source region fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24_src.reg
[Wed Jun 12 15:10:08 2013] Extracting stamp from image fullrun_mos1_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (258, 267) - (352, 361)
[Wed Jun 12 15:10:08 2013] XMMSAS bgd. selection expression = annulus(26507.878000, 27274.466000, 1358.450039, 2716.900078, X, Y) && !ellipse(27193.089980, 27422.399400, 1297.869637, 1297.869637, 0.000000, X, Y) && !ellipse(24284.583313, 29013.328552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26453.373199, 26280.777710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28552.752655, 28228.645264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30348.126400, 29546.717160, 1403.056040, 1403.056040, 0.000000, X, Y)
[Wed Jun 12 15:10:08 2013] Writing fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24.gif
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/events/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24_src.evt and ../../xmm0604860301/products/events/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24_bgd.evt exist, delete to re-create
[Wed Jun 12 15:10:09 2013] Mean detx,y = (132.50, -267.78) 
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/images/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24_src.img and ../../xmm0604860301/products/images/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24_bgd.img exist, delete to re-create
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/spectra/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24_bgd.pi exist, delete to re-create
[Wed Jun 12 15:10:09 2013] Setting source spectrum file to fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Wed Jun 12 15:10:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24_bgd.lc exist, delete to re-create
[Wed Jun 12 15:10:11 2013] fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24.rmf exists, delete to re-create
[Wed Jun 12 15:10:11 2013] fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24.arf exists, delete to re-create
[Wed Jun 12 15:12:37 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:37 2013] Total counts from fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 35689.00
[Wed Jun 12 15:12:37 2013] Total counts from fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24_bgd.pi.gz = 7199.00
[Wed Jun 12 15:12:37 2013] Got source and background scale factors 2076008.000000, 11891561.000000
[Wed Jun 12 15:12:37 2013] User source parameters:
  Position = (305.2, 314.1) = 18 14 13.20 -32 47 42.6
  Extent = 13.6 (13.5-27.2)", rotation angle = 0
  Source aperture counts = 34432.2 +/- 189.9
  Background aperture counts = 1256.8
  Rate = 0.3 +/- 0.002

[Wed Jun 12 15:12:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:38 2013] Using photon index=1.80, rate=0.00237, arf fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24.arf
[Wed Jun 12 15:12:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:38 2013] Updating source flux to 2.6e-14
[Wed Jun 12 15:12:46 2013] Flag b found in src. 24 procflags, skipping spectral fitting
[Wed Jun 12 15:12:46 2013] Flag c found in src. 24 procflags, skipping spectral fitting
[Wed Jun 12 15:12:49 2013] xmm0604860301/analysis//spectral/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete