[Wed Jun 12 12:53:15 2013] Detection parameters:
  Position = (406.3, 386.1) = 18 13 38.36 -32 42 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 537.8 +/- 31.1
  Background counts = 75.4
  Rate = 0.008 +/- 0.0005

[Wed Jun 12 12:53:16 2013] Off-axis axis estimate = 10.08'
[Wed Jun 12 12:54:01 2013] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 12 12:54:01 2013] Initial guess for spatial extent in simple fitting = 11.47"
[Wed Jun 12 12:54:01 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.915
[Wed Jun 12 12:54:01 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 11.47"
[Wed Jun 12 12:54:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun 12 12:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src2.csv
[Wed Jun 12 12:54:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun 12 12:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src2.csv
[Wed Jun 12 12:54:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:03 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 12 12:54:03 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 12 12:54:03 2013] Fit fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Jun 12 12:54:31 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 15.356650 pixels away
[Wed Jun 12 12:54:31 2013] Spatial fit model total counts = 974.280000, observed total counts = 882.000000
[Wed Jun 12 12:54:31 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 12:54:31 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:31 2013] Assessing source extent using major
[Wed Jun 12 12:54:31 2013] Source does appear to be extended
[Wed Jun 12 12:54:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:01 2013] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:55:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 12 12:55:01 2013] Initial guess for spatial extent in simple fitting = 11.47"
[Wed Jun 12 12:55:01 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.915
[Wed Jun 12 12:55:01 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 11.47"
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jun 12 12:55:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src2.csv
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jun 12 12:55:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src2.csv
[Wed Jun 12 12:55:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun 12 12:55:02 2013] Fit fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Jun 12 12:55:22 2013] Spatial fit model total counts = 1341.450000, observed total counts = 1341.000000
[Wed Jun 12 12:55:22 2013] Offset between fit and detection position for source 14 = 0.575538 pixels
[Wed Jun 12 12:55:22 2013] 1339.893000 total counts/ 1036.800000 bgd. counts: snr = 9.413008
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.575538 pixels
  Position = (405.8, 386.1) = 18 13 38.56 -32 42 28.8
  Extent = 4.5 (4.0-4.9)", rotation angle = 0
  Source counts = 303.1 +/- 36.6
  Background counts = 1036.8
  Rate = 0.002 +/- 0.0003
[Wed Jun 12 12:55:22 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:22 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 12:55:22 2013] Source does appear to be extended
[Wed Jun 12 12:55:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 15:10:08 2013] XMMSAS src. selection expression = ellipse(35252.807800, 33542.429800, 270.733208, 270.733208, 0.000000, X, Y)
[Wed Jun 12 15:10:08 2013] Not overwriting source region fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14_src.reg
[Wed Jun 12 15:10:08 2013] Extracting stamp from image fullrun_mos1_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (390, 371) - (421, 402)
[Wed Jun 12 15:10:08 2013] XMMSAS bgd. selection expression = annulus(35252.807800, 33542.429800, 451.222013, 902.444026, X, Y) && !ellipse(34498.231445, 34312.936951, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 15:10:08 2013] Writing fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14.gif
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/events/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0604860301/products/events/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create
[Wed Jun 12 15:10:09 2013] Mean detx,y = (6658.91, 7589.12) 
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/images/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14_src.img and ../../xmm0604860301/products/images/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/spectra/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create
[Wed Jun 12 15:10:09 2013] Setting source spectrum file to fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jun 12 15:10:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create
[Wed Jun 12 15:10:11 2013] fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14.rmf exists, delete to re-create
[Wed Jun 12 15:10:11 2013] fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14.arf exists, delete to re-create
[Wed Jun 12 15:12:35 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:35 2013] Total counts from fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 433.00
[Wed Jun 12 15:12:35 2013] Total counts from fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14_bgd.pi.gz = 596.00
[Wed Jun 12 15:12:35 2013] Got source and background scale factors 196708.000000, 1333340.000000
[Wed Jun 12 15:12:35 2013] User source parameters:
  Position = (405.8, 386.1) = 18 13 38.56 -32 42 28.8
  Extent = 4.5 (4.0-4.9)", rotation angle = 0
  Source aperture counts = 345.1 +/- 21.8
  Background aperture counts = 87.9
  Rate = 0.003 +/- 0.0002

[Wed Jun 12 15:12:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:38 2013] Using photon index=1.80, rate=0.00248, arf fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14.arf
[Wed Jun 12 15:12:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:38 2013] Updating source flux to 6.2e-14
[Wed Jun 12 15:12:46 2013] Flag p found in src. 14 procflags, skipping spectral fitting
[Wed Jun 12 15:12:49 2013] xmm0604860301/analysis//spectral/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete