[Wed Jun 12 12:53:15 2013] Detection parameters:
  Position = (397.1, 395.0) = 18 13 41.55 -32 41 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 421.1 +/- 28.8
  Background counts = 85.0
  Rate = 0.003 +/- 0.0002

[Wed Jun 12 12:53:16 2013] Off-axis axis estimate = 10.01'
[Wed Jun 12 12:54:02 2013] Using EEF radius (= 11.43 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:02 2013] Initial guess for spatial extent in simple fitting = 11.43"
[Wed Jun 12 12:54:02 2013] source mask rpix=2.6, npix_max = 39, mask sum = 24, frac = 0.613
[Wed Jun 12 12:54:02 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 11.43"
[Wed Jun 12 12:54:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src8.ximg exists
[Wed Jun 12 12:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src8.csv
[Wed Jun 12 12:54:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed Jun 12 12:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src8.csv
[Wed Jun 12 12:54:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:03 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed Jun 12 12:54:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Jun 12 12:54:03 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Jun 12 12:54:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Jun 12 12:54:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:31 2013] Warning, spatial fit 8 centroid is now closest to src. 14
[Wed Jun 12 12:54:31 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:31 2013] Assessing source extent using major
[Wed Jun 12 12:54:31 2013] Source does appear to be extended
[Wed Jun 12 12:54:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:01 2013] Using EEF radius (= 11.43 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:55:01 2013] Initial guess for spatial extent in simple fitting = 11.43"
[Wed Jun 12 12:55:01 2013] source mask rpix=2.6, npix_max = 39, mask sum = 24, frac = 0.613
[Wed Jun 12 12:55:01 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 11.43"
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src8.ximg exists
[Wed Jun 12 12:55:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src8.csv
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Jun 12 12:55:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src8.csv
[Wed Jun 12 12:55:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Jun 12 12:55:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Jun 12 12:55:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed Jun 12 12:55:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:22 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 11.035205 pixels away
[Wed Jun 12 12:55:22 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:22 2013] Assessing source extent using major
[Wed Jun 12 12:55:22 2013] Source does appear to be extended
[Wed Jun 12 12:55:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 15:10:08 2013] XMMSAS src. selection expression = ellipse(34498.231445, 34312.936951, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 15:10:08 2013] Not overwriting source region fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12_src.reg
[Wed Jun 12 15:10:08 2013] Extracting stamp from image fullrun_mos1_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (360, 357) - (435, 432)
[Wed Jun 12 15:10:08 2013] XMMSAS bgd. selection expression = annulus(34498.231445, 34312.936951, 1087.500000, 2175.000000, X, Y) && !ellipse(35252.807800, 33542.429800, 360.977610, 360.977610, 0.000000, X, Y) && !ellipse(33259.872681, 36605.421997, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 15:10:08 2013] Writing fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12.gif
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/events/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0604860301/products/events/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Wed Jun 12 15:10:09 2013] Mean detx,y = (7388.07, 6920.14) 
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/images/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12_src.img and ../../xmm0604860301/products/images/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/spectra/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Wed Jun 12 15:10:09 2013] Setting source spectrum file to fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jun 12 15:10:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Wed Jun 12 15:10:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 15:10:11 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:10:11 2013] fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12.arf exists, delete to re-create
[Wed Jun 12 15:12:36 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:36 2013] Total counts from fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 704.00
[Wed Jun 12 15:12:36 2013] Total counts from fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12_bgd.pi.gz = 3543.00
[Wed Jun 12 15:12:36 2013] Got source and background scale factors 981892.000000, 8297958.000000
[Wed Jun 12 15:12:36 2013] User source parameters:
  Position = (397.1, 395.0) = 18 13 41.55 -32 41 45.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 284.8 +/- 27.5
  Background aperture counts = 419.2
  Rate = 0.002 +/- 0.0002

[Wed Jun 12 15:12:36 2013] Updating counts from extracted products
[Wed Jun 12 15:12:36 2013] Set source signif. to 284.76/20.48 = 13.91
[Wed Jun 12 15:12:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:38 2013] Using photon index=1.80, rate=0.00233, arf fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12.arf
[Wed Jun 12 15:12:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:38 2013] Updating source flux to 4.6e-14
[Wed Jun 12 15:12:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:12:49 2013] xmm0604860301/analysis//spectral/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete