[Wed Jun 12 12:53:15 2013] Detection parameters: Position = (382.9, 421.3) = 18 13 46.47 -32 39 54.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 280.4 +/- 24.3 Background counts = 84.3 Rate = 0.004 +/- 0.0004 [Wed Jun 12 12:53:16 2013] Off-axis axis estimate = 10.81' [Wed Jun 12 12:54:01 2013] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting [Wed Jun 12 12:54:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Jun 12 12:54:01 2013] Initial guess for spatial extent in simple fitting = 11.83" [Wed Jun 12 12:54:01 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.013 [Wed Jun 12 12:54:01 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 11.83" [Wed Jun 12 12:54:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src4.ximg exists [Wed Jun 12 12:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src4.csv [Wed Jun 12 12:54:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src4_1.ximg exists [Wed Jun 12 12:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src4.csv [Wed Jun 12 12:54:02 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 12 12:54:03 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Wed Jun 12 12:54:03 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Wed Jun 12 12:54:03 2013] Fit fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Wed Jun 12 12:54:31 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.816621 pixels away [Wed Jun 12 12:54:31 2013] Vigneting correction estimate = 1.000000 [Wed Jun 12 12:54:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 12 12:54:31 2013] Assessing source extent using major [Wed Jun 12 12:54:31 2013] Source does appear to be extended [Wed Jun 12 12:54:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 12 12:55:01 2013] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting [Wed Jun 12 12:55:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Jun 12 12:55:01 2013] Initial guess for spatial extent in simple fitting = 11.83" [Wed Jun 12 12:55:01 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.013 [Wed Jun 12 12:55:01 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 11.83" [Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src4.ximg exists [Wed Jun 12 12:55:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src4.csv [Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src4_1.ximg exists [Wed Jun 12 12:55:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src4.csv [Wed Jun 12 12:55:02 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src4_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists [Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists [Wed Jun 12 12:55:02 2013] Fit fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly [Wed Jun 12 12:55:22 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 15.907953 pixels away [Wed Jun 12 12:55:22 2013] Vigneting correction estimate = 1.000000 [Wed Jun 12 12:55:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 12 12:55:22 2013] Assessing source extent using major [Wed Jun 12 12:55:22 2013] Source does appear to be extended [Wed Jun 12 12:55:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 12 15:10:08 2013] XMMSAS src. selection expression = ellipse(33259.872681, 36605.421997, 652.500000, 652.500000, 0.000000, X, Y) [Wed Jun 12 15:10:08 2013] Not overwriting source region fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11_src.reg [Wed Jun 12 15:10:08 2013] Extracting stamp from image fullrun_mos1_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (345, 384) - (420, 459) [Wed Jun 12 15:10:08 2013] XMMSAS bgd. selection expression = annulus(33259.872681, 36605.421997, 1087.500000, 2175.000000, X, Y) && !ellipse(34498.231445, 34312.936951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32671.579254, 39205.486877, 870.000000, 870.000000, 0.000000, X, Y) [Wed Jun 12 15:10:08 2013] Writing fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11.gif [Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/events/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0604860301/products/events/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create [Wed Jun 12 15:10:09 2013] Mean detx,y = (9631.56, 5444.38) [Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/images/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11_src.img and ../../xmm0604860301/products/images/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create [Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/spectra/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create [Wed Jun 12 15:10:09 2013] Setting source spectrum file to fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11_src_b10.pi.gz [Wed Jun 12 15:10:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11_bgd.pi.gz [Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create [Wed Jun 12 15:10:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Jun 12 15:10:11 2013] rmf not generated due to insufficient counts [Wed Jun 12 15:10:11 2013] fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11.arf exists, delete to re-create [Wed Jun 12 15:12:36 2013] Updating aperture counts using extracted products [Wed Jun 12 15:12:36 2013] Total counts from fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 820.00 [Wed Jun 12 15:12:36 2013] Total counts from fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11_bgd.pi.gz = 3842.00 [Wed Jun 12 15:12:36 2013] Got source and background scale factors 1340908.000000, 9363058.000000 [Wed Jun 12 15:12:36 2013] User source parameters: Position = (382.9, 421.3) = 18 13 46.47 -32 39 54.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 269.8 +/- 29.6 Background aperture counts = 550.2 Rate = 0.002 +/- 0.0002 [Wed Jun 12 15:12:36 2013] Updating counts from extracted products [Wed Jun 12 15:12:36 2013] Set source signif. to 269.78/23.46 = 11.50 [Wed Jun 12 15:12:38 2013] Calculating source flux in energy range 0.30-8.00 [Wed Jun 12 15:12:38 2013] Using photon index=1.80, rate=0.00221, arf fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11.arf [Wed Jun 12 15:12:38 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jun 12 15:12:38 2013] Updating source flux to 4.3e-14 [Wed Jun 12 15:12:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed Jun 12 15:12:49 2013] xmm0604860301/analysis//spectral/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete