[Wed Jun 12 12:53:15 2013] Detection parameters:
  Position = (279.6, 435.8) = 18 14 22.05 -32 38 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.7 +/- 18.3
  Background counts = 82.2
  Rate = 0.001 +/- 0.0001

[Wed Jun 12 12:53:16 2013] Off-axis axis estimate = 10.05'
[Wed Jun 12 12:54:02 2013] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:02 2013] Initial guess for spatial extent in simple fitting = 11.45"
[Wed Jun 12 12:54:02 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.070
[Wed Jun 12 12:54:02 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 11.45"
[Wed Jun 12 12:54:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src21.ximg exists
[Wed Jun 12 12:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src21.csv
[Wed Jun 12 12:54:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed Jun 12 12:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src21.csv
[Wed Jun 12 12:54:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:03 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed Jun 12 12:54:03 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Jun 12 12:54:03 2013] Fit fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Wed Jun 12 12:54:31 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.129084 pixels away
[Wed Jun 12 12:54:31 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.127106 pixels away
[Wed Jun 12 12:54:31 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:31 2013] Assessing source extent using major
[Wed Jun 12 12:54:31 2013] Source does appear to be extended
[Wed Jun 12 12:54:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:55:01 2013] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:55:01 2013] Initial guess for spatial extent in simple fitting = 11.45"
[Wed Jun 12 12:55:01 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.070
[Wed Jun 12 12:55:01 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 11.45"
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src19.ximg exists
[Wed Jun 12 12:55:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src19.csv
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Jun 12 12:55:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src19.csv
[Wed Jun 12 12:55:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Jun 12 12:55:02 2013] Fit fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Jun 12 12:55:22 2013] Spatial fit model total counts = 878.834000, observed total counts = 879.000000
[Wed Jun 12 12:55:22 2013] Offset between fit and detection position for source 10 = 0.115195 pixels
[Wed Jun 12 12:55:22 2013] 872.450700 total counts/ 785.703000 bgd. counts: snr = 3.094773
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.115195 pixels
  Position = (279.5, 435.8) = 18 14 22.08 -32 38 53.0
  Extent = 4.3 (3.2-5.4)", rotation angle = 0
  Source counts = 86.7 +/- 29.5
  Background counts = 785.7
  Rate = 0.0007 +/- 0.0002
[Wed Jun 12 12:55:22 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:22 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 12:55:22 2013] Source does appear to be extended
[Wed Jun 12 12:55:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 15:10:08 2013] XMMSAS src. selection expression = ellipse(24264.869800, 37865.905260, 255.613807, 255.613807, 0.000000, X, Y)
[Wed Jun 12 15:10:08 2013] Not overwriting source region fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10_src.reg
[Wed Jun 12 15:10:08 2013] Extracting stamp from image fullrun_mos1_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (265, 421) - (294, 450)
[Wed Jun 12 15:10:08 2013] XMMSAS bgd. selection expression = annulus(24264.869800, 37865.905260, 426.023012, 852.046025, X, Y)
[Wed Jun 12 15:10:08 2013] Writing fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10.gif
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/events/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0604860301/products/events/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Jun 12 15:10:09 2013] Mean detx,y = (10447.49, -3586.18) 
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/images/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10_src.img and ../../xmm0604860301/products/images/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/spectra/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Jun 12 15:10:09 2013] Setting source spectrum file to fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jun 12 15:10:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Jun 12 15:10:11 2013] Not generating rmf since there are only 86 counts
[Wed Jun 12 15:10:11 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:10:11 2013] fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Wed Jun 12 15:12:37 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:37 2013] Total counts from fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 176.00
[Wed Jun 12 15:12:37 2013] Total counts from fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10_bgd.pi.gz = 686.00
[Wed Jun 12 15:12:37 2013] Got source and background scale factors 209600.000000, 1583068.000000
[Wed Jun 12 15:12:37 2013] User source parameters:
  Position = (279.5, 435.8) = 18 14 22.08 -32 38 53.0
  Extent = 4.3 (3.2-5.4)", rotation angle = 0
  Source aperture counts = 85.2 +/- 14.3
  Background aperture counts = 90.8
  Rate = 0.0007 +/- 0.0001

[Wed Jun 12 15:12:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:38 2013] Using photon index=1.80, rate=0.00071, arf fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10.arf
[Wed Jun 12 15:12:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:38 2013] Updating source flux to 2.2e-14
[Wed Jun 12 15:12:46 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 12 15:12:49 2013] xmm0604860301/analysis//spectral/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete