[Wed Jun 12 12:53:15 2013] Detection parameters:
  Position = (313.3, 315.9) = 18 14 10.43 -32 47 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50691.3 +/- 270.3
  Background counts = 96.0
  Rate = 0.4 +/- 0.002

[Wed Jun 12 12:53:16 2013] Off-axis axis estimate = 1.66'
[Wed Jun 12 12:54:01 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:54:01 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Wed Jun 12 12:54:01 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Wed Jun 12 12:54:01 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Wed Jun 12 12:54:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 12 12:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src1.csv
[Wed Jun 12 12:54:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 12 12:54:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src1.csv
[Wed Jun 12 12:54:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:54:03 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 12 12:54:03 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 12 12:54:03 2013] Fit fullrun_mos1_xmm0604860301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 12 12:54:31 2013] Spatial fit model total counts = 44501.300000, observed total counts = 44447.000000
[Wed Jun 12 12:54:31 2013] Offset between fit and detection position for source 1 = 0.191326 pixels
[Wed Jun 12 12:54:31 2013] 44510.360000 total counts/ 9885.760000 bgd. counts: snr = 348.240866
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.191326 pixels
  Position = (313.1, 315.8) = 18 14 10.48 -32 47 35.1
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 34624.6 +/- 211.0
  Background counts = 9885.8
  Rate = 0.3 +/- 0.002
[Wed Jun 12 12:54:31 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:54:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:54:31 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 12:54:31 2013] Source does appear to be extended
[Wed Jun 12 12:54:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 12:54:31 2013] Source is confused with source 24
[Wed Jun 12 12:55:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 12:55:01 2013] Initial guess for spatial extent in simple fitting = 5.39"
[Wed Jun 12 12:55:01 2013] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.323
[Wed Jun 12 12:55:01 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.39"
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 12 12:55:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src1.csv
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 12 12:55:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src1.csv
[Wed Jun 12 12:55:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 12 12:55:02 2013] fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 12 12:55:02 2013] Fit fullrun_mos1_xmm0604860301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 12 12:55:22 2013] Spatial fit model total counts = 44451.000000, observed total counts = 44451.000000
[Wed Jun 12 12:55:22 2013] Offset between fit and detection position for source 1 = 0.010832 pixels
[Wed Jun 12 12:55:22 2013] 44441.030000 total counts/ 9769.330000 bgd. counts: snr = 350.786399
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.010832 pixels
  Position = (313.1, 315.8) = 18 14 10.48 -32 47 35.1
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 34671.7 +/- 210.8
  Background counts = 9769.3
  Rate = 0.3 +/- 0.002
[Wed Jun 12 12:55:22 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 12:55:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 12:55:22 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 12:55:22 2013] Source does appear to be extended
[Wed Jun 12 12:55:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 15:10:08 2013] Counts = 34671.700000, rescaling region sizes by 3.000000
[Wed Jun 12 15:10:08 2013] XMMSAS src. selection expression = ellipse(27193.089980, 27422.399400, 973.402228, 973.402228, 0.000000, X, Y)
[Wed Jun 12 15:10:08 2013] Not overwriting source region fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 12 15:10:08 2013] Extracting stamp from image fullrun_mos1_xmm0604860301_pi300-10000_cl_sm2.00.img.gz, (257, 260) - (369, 372)
[Wed Jun 12 15:10:08 2013] XMMSAS bgd. selection expression = annulus(27193.089980, 27422.399400, 4867.011140, 9734.022280, X, Y) && !ellipse(24284.583313, 29013.328552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35252.807800, 33542.429800, 360.977610, 360.977610, 0.000000, X, Y) && !ellipse(33259.872681, 36605.421997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26453.373199, 26280.777710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36519.422943, 28991.894501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34498.231445, 34312.936951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18518.834076, 27269.773468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34676.275991, 26246.627049, 535.281791, 480.301770, 43.747192, X, Y) && !ellipse(18540.175201, 20759.848724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26507.878000, 27274.466000, 1086.760031, 1086.760031, 0.000000, X, Y) && !ellipse(28552.752655, 28228.645264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30348.126400, 29546.717160, 1403.056040, 1403.056040, 0.000000, X, Y)
[Wed Jun 12 15:10:08 2013] Writing fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1.gif
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/events/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0604860301/products/events/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Jun 12 15:10:09 2013] Mean detx,y = (163.58, -162.13) 
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/images/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1_src.img and ../../xmm0604860301/products/images/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/spectra/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0604860301/products/spectra/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Jun 12 15:10:09 2013] Setting source spectrum file to fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 12 15:10:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 12 15:10:09 2013] ../../xmm0604860301/products/lightcurves/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0604860301/products/lightcurves/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Jun 12 15:10:11 2013] fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Wed Jun 12 15:10:11 2013] fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Wed Jun 12 15:12:35 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:12:35 2013] Total counts from fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 46627.00
[Wed Jun 12 15:12:35 2013] Total counts from fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 35620.00
[Wed Jun 12 15:12:35 2013] Got source and background scale factors 2979456.000000, 77900093.000000
[Wed Jun 12 15:12:35 2013] User source parameters:
  Position = (313.1, 315.8) = 18 14 10.48 -32 47 35.1
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source aperture counts = 45264.6 +/- 216.9
  Background aperture counts = 1362.4
  Rate = 0.4 +/- 0.002

[Wed Jun 12 15:12:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:12:38 2013] Using photon index=1.80, rate=0.284, arf fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1.arf
[Wed Jun 12 15:12:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:12:38 2013] Updating source flux to 3e-12
[Wed Jun 12 15:12:46 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Jun 12 15:12:49 2013] xmm0604860301/analysis//spectral/fullrun_mos1_xmm0604860301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete