[Thu May 31 09:03:06 2012] Detection parameters:
  Position = (143.4, 224.9) = 18 15 9.13 -32 54 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 308.0 +/- 32.4
  Background counts = 237.0
  Rate = 0.003 +/- 0.0003

[Thu May 31 09:03:07 2012] Off-axis axis estimate = 12.44'
[Thu May 31 09:09:52 2012] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Thu May 31 09:09:52 2012] Initial guess for spatial extent in simple fitting = 12.65"
[Thu May 31 09:09:52 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.904
[Thu May 31 09:09:52 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 12.65"
[Thu May 31 12:06:39 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src81.ximg exists
[Thu May 31 12:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src81.csv
[Thu May 31 12:06:39 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src81_1.ximg exists
[Thu May 31 12:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src81.csv
[Thu May 31 12:06:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 12:06:41 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Thu May 31 12:06:41 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Thu May 31 12:06:41 2012] Fit fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Thu May 31 13:49:43 2012] Warning: source 81 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 85 at 17.098016 pixels away
[Thu May 31 13:49:43 2012] Warning: source 91 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 85 at 13.507317 pixels away
[Thu May 31 13:49:43 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:49:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:49:43 2012] Assessing source extent using major
[Thu May 31 13:49:43 2012] Source does appear to be extended
[Thu May 31 13:49:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 13:50:10 2012] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Thu May 31 13:50:10 2012] Initial guess for spatial extent in simple fitting = 12.65"
[Thu May 31 13:50:10 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.904
[Thu May 31 13:50:10 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 12.65"
[Thu May 31 18:54:02 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src77.ximg exists
[Thu May 31 18:54:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src77.csv
[Thu May 31 18:54:02 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src77_1.ximg exists
[Thu May 31 18:54:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src77.csv
[Thu May 31 18:54:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 18:54:04 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Thu May 31 18:54:04 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Thu May 31 18:54:04 2012] Fit fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Thu May 31 20:15:24 2012] Spatial fit model total counts = 2590.280000, observed total counts = 2591.000000
[Thu May 31 20:15:24 2012] Offset between fit and detection position for source 85 = 0.338024 pixels
[Thu May 31 20:15:24 2012] 2588.326000 total counts/ 2437.190000 bgd. counts: snr = 3.061422
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 0.338024 pixels
  Position = (143.6, 224.7) = 18 15 9.06 -32 54 10.7
  Extent = 4.6 (3.6-5.9)", rotation angle = 0
  Source counts = 151.1 +/- 50.9
  Background counts = 2437.2
  Rate = 0.001 +/- 0.0005
[Thu May 31 20:15:24 2012] Vigneting correction estimate = 1.000000
[Thu May 31 20:15:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 20:15:24 2012] Assessing source extent using major axis lower bound
[Thu May 31 20:15:24 2012] Source does appear to be extended
[Thu May 31 20:15:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 20:15:50 2012] XMMSAS src. selection expression = ellipse(12442.829600, 19496.846800, 273.641408, 273.641408, 0.000000, X, Y)
[Thu May 31 20:15:50 2012] Writing source region out to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src85_src.reg
[Thu May 31 20:15:50 2012] Extracting stamp from image fullrun_pn_xmm0604860201_pi300-10000_cl_sm2.00.img.gz, (128, 209) - (159, 240)
[Thu May 31 20:15:50 2012] XMMSAS bgd. selection expression = annulus(12442.829600, 19496.846800, 456.069013, 912.138026, X, Y) && !ellipse(12427.611435, 17866.482758, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 31 20:15:50 2012] Writing fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src85.gif
[Thu May 31 22:17:22 2012] Mean detx,y = (-14200.95, 8554.23) 
[Thu May 31 22:17:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 22:17:39 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 22:17:39 2012] Setting source spectrum file to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Thu May 31 22:17:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Fri Jun  1 05:02:45 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:02:45 2012] Error reading totcts from fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Fri Jun  1 05:02:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:02:48 2012] Using photon index=1.80, rate=0.0014, arf fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src85.arf
[Fri Jun  1 05:02:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:02:48 2012] Updating source flux to 1.7e-14