[Thu May 31 09:03:05 2012] Detection parameters:
  Position = (281.2, 315.9) = 18 14 21.51 -32 47 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.7 +/- 26.3
  Background counts = 309.9
  Rate = 0.001 +/- 0.0003

[Thu May 31 09:03:07 2012] Off-axis axis estimate = 1.78'
[Thu May 31 09:09:52 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Thu May 31 09:09:52 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Thu May 31 09:09:52 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Thu May 31 09:09:52 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 7.32"
[Thu May 31 12:06:39 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src53.ximg exists
[Thu May 31 12:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src53.csv
[Thu May 31 12:06:39 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src53_1.ximg exists
[Thu May 31 12:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src53.csv
[Thu May 31 12:06:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 12:06:40 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Thu May 31 12:06:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src53.csv
[Thu May 31 12:06:40 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Thu May 31 12:06:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src53.csv
[Thu May 31 12:06:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:49:43 2012] Warning, spatial fit 53 centroid is now closest to src. 58
[Thu May 31 13:49:43 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:49:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:49:43 2012] Assessing source extent using major
[Thu May 31 13:49:43 2012] Source does appear to be extended
[Thu May 31 13:49:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 13:50:10 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Thu May 31 13:50:10 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Thu May 31 13:50:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Thu May 31 13:50:10 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 7.32"
[Thu May 31 18:54:02 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src51.ximg exists
[Thu May 31 18:54:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src51.csv
[Thu May 31 18:54:02 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src51_1.ximg exists
[Thu May 31 18:54:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src51.csv
[Thu May 31 18:54:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 18:54:03 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Thu May 31 18:54:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src51.csv
[Thu May 31 18:54:04 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Thu May 31 18:54:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src51.csv
[Thu May 31 18:54:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 20:15:23 2012] Source 57 is offset by 0.489207 and 5.850105 pixels which is larger than
2 X fitted extent = 1.040887 x 1.040887, not incorporating fit results
[Thu May 31 20:15:24 2012] Vigneting correction estimate = 1.000000
[Thu May 31 20:15:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 20:15:24 2012] Assessing source extent using major
[Thu May 31 20:15:24 2012] Source does appear to be extended
[Thu May 31 20:15:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 20:15:50 2012] XMMSAS src. selection expression = ellipse(24416.256836, 27437.457153, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 20:15:50 2012] Writing source region out to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src57_src.reg
[Thu May 31 20:15:50 2012] Extracting stamp from image fullrun_pn_xmm0604860201_pi300-10000_cl_sm2.00.img.gz, (244, 278) - (319, 353)
[Thu May 31 20:15:50 2012] XMMSAS bgd. selection expression = annulus(24416.256836, 27437.457153, 1087.500000, 2175.000000, X, Y) && !ellipse(27206.005600, 27432.230400, 1347.091239, 1347.091239, 0.000000, X, Y) && !ellipse(23827.490000, 29292.582000, 713.080821, 713.080821, 0.000000, X, Y) && !ellipse(23204.254547, 29863.068024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25232.219025, 29785.280975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25138.007965, 29262.479156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25399.995636, 28913.515381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27109.327393, 28827.511017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26409.419189, 28834.926514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22690.073608, 28215.869263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24028.580078, 28176.651825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23756.941376, 27235.996185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22641.858276, 25961.693634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27130.100342, 25357.347900, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 31 20:15:50 2012] Writing fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src57.gif
[Thu May 31 21:45:00 2012] Mean detx,y = (-2745.78, 12.45) 
[Thu May 31 21:45:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 21:45:34 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 21:45:35 2012] Setting source spectrum file to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Thu May 31 21:45:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Thu May 31 23:50:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 23:50:43 2012] rmf not generated due to insufficient counts
[Fri Jun  1 05:02:43 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:02:43 2012] Error reading totcts from fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Fri Jun  1 05:02:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:02:47 2012] Using photon index=1.80, rate=0.0014, arf fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src57.arf
[Fri Jun  1 05:02:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:02:48 2012] Updating source flux to 4.7e-15
[Fri Jun  1 05:05:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting