[Thu May 31 09:03:04 2012] Detection parameters:
  Position = (236.9, 343.0) = 18 14 36.79 -32 45 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1949.1 +/- 57.9
  Background counts = 281.9
  Rate = 0.03 +/- 0.0009

[Thu May 31 09:03:07 2012] Off-axis axis estimate = 5.51'
[Thu May 31 09:09:52 2012] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Thu May 31 09:09:52 2012] Initial guess for spatial extent in simple fitting = 9.18"
[Thu May 31 09:09:52 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.320
[Thu May 31 09:09:52 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.18"
[Thu May 31 12:06:38 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src5.ximg exists
[Thu May 31 12:06:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src5.csv
[Thu May 31 12:06:38 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May 31 12:06:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src5.csv
[Thu May 31 12:06:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 12:06:40 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May 31 12:06:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May 31 12:06:40 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 31 12:06:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May 31 12:06:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:49:43 2012] Spatial fit model total counts = 4348.240000, observed total counts = 3612.000000
[Thu May 31 13:49:43 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 31 13:49:43 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:49:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:49:43 2012] Assessing source extent using major
[Thu May 31 13:49:43 2012] Source does appear to be extended
[Thu May 31 13:49:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 13:49:43 2012] Source is confused with source 43
[Thu May 31 13:50:10 2012] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Thu May 31 13:50:10 2012] Initial guess for spatial extent in simple fitting = 9.18"
[Thu May 31 13:50:10 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.320
[Thu May 31 13:50:10 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.18"
[Thu May 31 18:54:01 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 31 18:54:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src5.csv
[Thu May 31 18:54:01 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 31 18:54:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src5.csv
[Thu May 31 18:54:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 18:54:03 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 31 18:54:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 31 18:54:03 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 31 18:54:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 31 18:54:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 20:15:23 2012] Spatial fit model total counts = 4345.160000, observed total counts = 3612.000000
[Thu May 31 20:15:23 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 31 20:15:24 2012] Vigneting correction estimate = 1.000000
[Thu May 31 20:15:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 20:15:24 2012] Assessing source extent using major
[Thu May 31 20:15:24 2012] Source does appear to be extended
[Thu May 31 20:15:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 20:15:48 2012] Counts = 1949.115845, rescaling region sizes by 2.000000
[Thu May 31 20:15:48 2012] XMMSAS src. selection expression = ellipse(20561.861862, 29790.585724, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu May 31 20:15:48 2012] Writing source region out to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src5_src.reg
[Thu May 31 20:15:48 2012] Extracting stamp from image fullrun_pn_xmm0604860201_pi300-10000_cl_sm2.00.img.gz, (162, 268) - (312, 418)
[Thu May 31 20:15:48 2012] XMMSAS bgd. selection expression = annulus(20561.861862, 29790.585724, 4350.000000, 8700.000000, X, Y) && !ellipse(27206.005600, 27432.230400, 1347.091239, 1347.091239, 0.000000, X, Y) && !ellipse(23827.490000, 29292.582000, 713.080821, 713.080821, 0.000000, X, Y) && !ellipse(16021.829409, 28391.914115, 512.406000, 460.339334, 68.087111, X, Y) && !ellipse(22367.115600, 38593.961400, 761.307222, 356.614410, 166.337608, X, Y) && !ellipse(20772.493301, 38526.664917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19527.058884, 37980.952850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29309.321838, 37863.308502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24299.124908, 37818.751801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17902.693375, 36991.598663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29510.181800, 32918.822000, 409.652812, 409.652812, 0.000000, X, Y) && !ellipse(27627.522736, 31807.008789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20912.931076, 31443.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23204.254547, 29863.068024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21128.869919, 29948.889191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25232.219025, 29785.280975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13512.670135, 29474.756714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25138.007965, 29262.479156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25399.995636, 28913.515381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27109.327393, 28827.511017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26409.419189, 28834.926514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28335.287170, 28817.270569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22690.073608, 28215.869263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24028.580078, 28176.651825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24416.256836, 27437.457153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23756.941376, 27235.996185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18558.205540, 27288.219200, 438.198413, 438.198413, 0.000000, X, Y) && !ellipse(22641.858276, 25961.693634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18327.704880, 25377.132600, 390.396011, 390.396011, 0.000000, X, Y) && !ellipse(28183.159302, 24681.863312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26070.704880, 24768.132600, 390.396011, 390.396011, 0.000000, X, Y) && !ellipse(27130.100342, 25357.347900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27010.369074, 23644.388000, 1188.872034, 476.986414, 93.499210, X, Y) && !ellipse(20668.521027, 23699.284760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24104.694458, 23407.624481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26936.168880, 22843.961600, 1296.560037, 393.140011, 92.944920, X, Y) && !ellipse(26935.685300, 22085.481000, 1296.560037, 358.703210, 88.197920, X, Y) && !ellipse(19523.627258, 21333.471786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18544.907791, 20807.498535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26888.342400, 20913.825400, 485.011214, 485.011214, 0.000000, X, Y)
[Thu May 31 20:15:48 2012] Writing fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src5.gif
[Thu May 31 20:33:34 2012] Mean detx,y = (-6500.75, -2190.07) 
[Thu May 31 20:33:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 20:35:29 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 20:35:29 2012] Setting source spectrum file to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May 31 20:35:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May 31 23:05:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 23:05:29 2012] rmf not generated due to insufficient counts
[Fri Jun  1 05:02:41 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:02:41 2012] Error reading totcts from fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun  1 05:02:46 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:02:46 2012] Using photon index=1.80, rate=0.0298, arf fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src5.arf
[Fri Jun  1 05:02:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:02:46 2012] Updating source flux to 1.1e-13
[Fri Jun  1 05:05:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting