[Thu May 31 09:03:04 2012] Detection parameters:
  Position = (406.1, 385.9) = 18 13 38.45 -32 42 29.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1239.8 +/- 48.7
  Background counts = 260.1
  Rate = 0.02 +/- 0.0008

[Thu May 31 09:03:07 2012] Off-axis axis estimate = 10.06'
[Thu May 31 09:09:52 2012] Using EEF radius (= 11.46 ")to estimate initial spatial extent for simple fitting
[Thu May 31 09:09:52 2012] Initial guess for spatial extent in simple fitting = 11.46"
[Thu May 31 09:09:52 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.916
[Thu May 31 09:09:52 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.46"
[Thu May 31 12:06:38 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src4.ximg exists
[Thu May 31 12:06:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src4.csv
[Thu May 31 12:06:38 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May 31 12:06:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src4.csv
[Thu May 31 12:06:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 12:06:40 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May 31 12:06:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 31 12:06:40 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May 31 12:06:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 31 12:06:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:49:42 2012] Warning, spatial fit 4 centroid is now closest to src. 33
[Thu May 31 13:49:43 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:49:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:49:43 2012] Assessing source extent using major
[Thu May 31 13:49:43 2012] Source does appear to be extended
[Thu May 31 13:49:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 13:50:10 2012] Using EEF radius (= 11.46 ")to estimate initial spatial extent for simple fitting
[Thu May 31 13:50:10 2012] Initial guess for spatial extent in simple fitting = 11.46"
[Thu May 31 13:50:10 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.916
[Thu May 31 13:50:10 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.46"
[Thu May 31 18:54:01 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src4.ximg exists
[Thu May 31 18:54:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src4.csv
[Thu May 31 18:54:01 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu May 31 18:54:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src4.csv
[Thu May 31 18:54:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 18:54:03 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu May 31 18:54:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu May 31 18:54:03 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu May 31 18:54:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu May 31 18:54:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 20:15:23 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.714449 pixels away
[Thu May 31 20:15:24 2012] Vigneting correction estimate = 1.000000
[Thu May 31 20:15:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 20:15:24 2012] Assessing source extent using major
[Thu May 31 20:15:24 2012] Source does appear to be extended
[Thu May 31 20:15:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 20:15:48 2012] Counts = 1239.816162, rescaling region sizes by 2.000000
[Thu May 31 20:15:48 2012] XMMSAS src. selection expression = ellipse(35284.685638, 33521.985138, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu May 31 20:15:48 2012] Writing source region out to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src4_src.reg
[Thu May 31 20:15:48 2012] Extracting stamp from image fullrun_pn_xmm0604860201_pi300-10000_cl_sm2.00.img.gz, (331, 311) - (481, 461)
[Thu May 31 20:15:48 2012] XMMSAS bgd. selection expression = annulus(35284.685638, 33521.985138, 4350.000000, 8700.000000, X, Y) && !ellipse(27206.005600, 27432.230400, 1347.091239, 1347.091239, 0.000000, X, Y) && !ellipse(30948.444000, 33361.496582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38817.273804, 33446.874359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34719.825500, 26386.100067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34518.667206, 34393.145386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33268.833405, 36602.859894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32148.785400, 41748.545624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32672.298000, 40906.554000, 447.085613, 447.085613, 0.000000, X, Y) && !ellipse(30247.569366, 40423.781586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32693.621307, 39137.125183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38532.147552, 38032.287842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29309.321838, 37863.308502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35417.599060, 37436.974518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35542.706696, 34891.964325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29510.181800, 32918.822000, 409.652812, 409.652812, 0.000000, X, Y) && !ellipse(27627.522736, 31807.008789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32524.153200, 31655.595400, 262.820008, 262.820008, 0.000000, X, Y) && !ellipse(30874.522675, 31390.668335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30789.760864, 29358.349609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27109.327393, 28827.511017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26409.419189, 28834.926514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36498.810580, 28991.046000, 463.440813, 463.440813, 0.000000, X, Y) && !ellipse(28335.287170, 28817.270569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39152.596039, 28427.228180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36119.137451, 25309.233459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28183.159302, 24681.863312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27130.100342, 25357.347900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39489.030731, 23991.337982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27010.369074, 23644.388000, 1188.872034, 476.986414, 93.499210, X, Y)
[Thu May 31 20:15:48 2012] Writing fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src4.gif
[Thu May 31 20:28:59 2012] Mean detx,y = (7663.50, -6774.81) 
[Thu May 31 20:29:11 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 20:32:27 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 20:32:27 2012] Setting source spectrum file to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 31 20:32:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May 31 23:04:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 23:04:54 2012] rmf not generated due to insufficient counts
[Fri Jun  1 05:02:41 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:02:41 2012] Error reading totcts from fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  1 05:02:46 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:02:46 2012] Using photon index=1.80, rate=0.0205, arf fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src4.arf
[Fri Jun  1 05:02:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:02:46 2012] Updating source flux to 8.2e-14
[Fri Jun  1 05:05:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting