[Thu May 31 09:03:04 2012] Detection parameters:
  Position = (348.2, 465.2) = 18 13 58.43 -32 36 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.4 +/- 25.6
  Background counts = 251.2
  Rate = 0.001 +/- 0.0002

[Thu May 31 09:03:07 2012] Off-axis axis estimate = 12.62'
[Thu May 31 09:09:52 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Thu May 31 09:09:52 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Thu May 31 09:09:52 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.042
[Thu May 31 09:09:52 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.74"
[Thu May 31 12:06:38 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src18.ximg exists
[Thu May 31 12:06:38 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu May 31 12:06:38 2012] Fit fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src18 appears to have run properly
[Thu May 31 12:06:40 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu May 31 12:06:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu May 31 12:06:40 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu May 31 12:06:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu May 31 12:06:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:49:43 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 17.298554 pixels away
[Thu May 31 13:49:43 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:49:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:49:43 2012] Assessing source extent using major
[Thu May 31 13:49:43 2012] Source does appear to be extended
[Thu May 31 13:49:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 13:50:10 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Thu May 31 13:50:10 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Thu May 31 13:50:10 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.042
[Thu May 31 13:50:10 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 12.74"
[Thu May 31 18:54:02 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src18.ximg exists
[Thu May 31 18:54:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src18.csv
[Thu May 31 18:54:02 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu May 31 18:54:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src18.csv
[Thu May 31 18:54:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 18:54:03 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu May 31 18:54:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Thu May 31 18:54:03 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu May 31 18:54:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Thu May 31 18:54:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 20:15:23 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 16.116129 pixels away
[Thu May 31 20:15:24 2012] Vigneting correction estimate = 1.000000
[Thu May 31 20:15:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 20:15:24 2012] Assessing source extent using major
[Thu May 31 20:15:24 2012] Source does appear to be extended
[Thu May 31 20:15:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 20:15:49 2012] XMMSAS src. selection expression = ellipse(30247.569366, 40423.781586, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 20:15:49 2012] Writing source region out to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src19_src.reg
[Thu May 31 20:15:49 2012] Extracting stamp from image fullrun_pn_xmm0604860201_pi300-10000_cl_sm2.00.img.gz, (311, 428) - (386, 503)
[Thu May 31 20:15:49 2012] XMMSAS bgd. selection expression = annulus(30247.569366, 40423.781586, 1087.500000, 2175.000000, X, Y) && !ellipse(32148.785400, 41748.545624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32672.298000, 40906.554000, 447.085613, 447.085613, 0.000000, X, Y) && !ellipse(32693.621307, 39137.125183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29309.321838, 37863.308502, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 31 20:15:49 2012] Writing fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src19.gif
[Thu May 31 20:58:50 2012] Mean detx,y = (2486.82, -13222.40) 
[Thu May 31 20:58:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 20:59:31 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 20:59:31 2012] Setting source spectrum file to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu May 31 20:59:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu May 31 23:18:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 23:18:08 2012] rmf not generated due to insufficient counts
[Fri Jun  1 05:02:42 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:02:42 2012] Error reading totcts from fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jun  1 05:02:46 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:02:46 2012] Using photon index=1.80, rate=0.00135, arf fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src19.arf
[Fri Jun  1 05:02:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:02:46 2012] Updating source flux to 8.2e-15
[Fri Jun  1 05:05:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting