[Thu May 31 09:03:04 2012] Detection parameters:
  Position = (313.4, 315.9) = 18 14 10.41 -32 47 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149069.6 +/- 460.1
  Background counts = 337.1
  Rate = 1 +/- 0.005

[Thu May 31 09:03:07 2012] Off-axis axis estimate = 1.67'
[Thu May 31 09:09:52 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu May 31 09:09:52 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu May 31 09:09:52 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.062
[Thu May 31 09:09:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu May 31 12:06:38 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 31 12:06:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src1.csv
[Thu May 31 12:06:38 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 31 12:06:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src1.csv
[Thu May 31 12:06:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 12:06:39 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 31 12:06:40 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 31 12:06:40 2012] Fit fullrun_pn_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 31 13:49:42 2012] Spatial fit model total counts = 125640.000000, observed total counts = 126592.000000
[Thu May 31 13:49:42 2012] Offset between fit and detection position for source 1 = 0.130001 pixels
[Thu May 31 13:49:42 2012] 125768.000000 total counts/ 25600.000000 bgd. counts: snr = 626.050000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.130001 pixels
  Position = (313.3, 315.9) = 18 14 10.45 -32 47 34.7
  Extent = 5.6 (5.6-5.6)", rotation angle = 0
  Source counts = 100168.0 +/- 354.6
  Background counts = 25600.0
  Rate = 0.9 +/- 0.003
[Thu May 31 13:49:43 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:49:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:49:43 2012] Assessing source extent using major axis lower bound
[Thu May 31 13:49:43 2012] Source does appear to be extended
[Thu May 31 13:49:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 13:50:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 13:50:10 2012] Initial guess for spatial extent in simple fitting = 5.61"
[Thu May 31 13:50:10 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.248
[Thu May 31 13:50:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.61"
[Thu May 31 18:54:01 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 31 18:54:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src1.csv
[Thu May 31 18:54:01 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 31 18:54:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src1.csv
[Thu May 31 18:54:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 18:54:03 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 31 18:54:03 2012] fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 31 18:54:03 2012] Fit fullrun_pn_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 31 20:15:23 2012] Spatial fit model total counts = 125643.000000, observed total counts = 126592.000000
[Thu May 31 20:15:23 2012] Offset between fit and detection position for source 1 = 0.000007 pixels
[Thu May 31 20:15:23 2012] 125771.000000 total counts/ 25600.000000 bgd. counts: snr = 626.068750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000007 pixels
  Position = (313.3, 315.9) = 18 14 10.45 -32 47 34.7
  Extent = 5.6 (5.6-5.6)", rotation angle = 0
  Source counts = 100171.0 +/- 354.6
  Background counts = 25600.0
  Rate = 0.9 +/- 0.003
[Thu May 31 20:15:24 2012] Vigneting correction estimate = 1.000000
[Thu May 31 20:15:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 20:15:24 2012] Assessing source extent using major axis lower bound
[Thu May 31 20:15:24 2012] Source does appear to be extended
[Thu May 31 20:15:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 20:15:48 2012] Counts = 100171.000000, rescaling region sizes by 3.000000
[Thu May 31 20:15:48 2012] XMMSAS src. selection expression = ellipse(27206.005600, 27432.230400, 1010.318429, 1010.318429, 0.000000, X, Y)
[Thu May 31 20:15:48 2012] Writing source region out to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src1_src.reg
[Thu May 31 20:15:48 2012] Extracting stamp from image fullrun_pn_xmm0604860201_pi300-10000_cl_sm2.00.img.gz, (255, 258) - (371, 374)
[Thu May 31 20:15:48 2012] XMMSAS bgd. selection expression = annulus(27206.005600, 27432.230400, 5051.592145, 10103.184291, X, Y) && !ellipse(30948.444000, 33361.496582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35284.685638, 33521.985138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20561.861862, 29790.585724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23827.490000, 29292.582000, 713.080821, 713.080821, 0.000000, X, Y) && !ellipse(34719.825500, 26386.100067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34518.667206, 34393.145386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33268.833405, 36602.859894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19527.058884, 37980.952850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29309.321838, 37863.308502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24299.124908, 37818.751801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35417.599060, 37436.974518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17902.693375, 36991.598663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35542.706696, 34891.964325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29510.181800, 32918.822000, 409.652812, 409.652812, 0.000000, X, Y) && !ellipse(27627.522736, 31807.008789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32524.153200, 31655.595400, 262.820008, 262.820008, 0.000000, X, Y) && !ellipse(20912.931076, 31443.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30874.522675, 31390.668335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23204.254547, 29863.068024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21128.869919, 29948.889191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25232.219025, 29785.280975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30789.760864, 29358.349609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25138.007965, 29262.479156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25399.995636, 28913.515381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27109.327393, 28827.511017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26409.419189, 28834.926514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36498.810580, 28991.046000, 463.440813, 463.440813, 0.000000, X, Y) && !ellipse(28335.287170, 28817.270569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22690.073608, 28215.869263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24028.580078, 28176.651825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24416.256836, 27437.457153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23756.941376, 27235.996185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18558.205540, 27288.219200, 438.198413, 438.198413, 0.000000, X, Y) && !ellipse(22641.858276, 25961.693634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36119.137451, 25309.233459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18327.704880, 25377.132600, 390.396011, 390.396011, 0.000000, X, Y) && !ellipse(28183.159302, 24681.863312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26070.704880, 24768.132600, 390.396011, 390.396011, 0.000000, X, Y) && !ellipse(27130.100342, 25357.347900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27010.369074, 23644.388000, 1188.872034, 476.986414, 93.499210, X, Y) && !ellipse(30927.275452, 23887.975037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20668.521027, 23699.284760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24104.694458, 23407.624481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35865.430817, 22524.532532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26936.168880, 22843.961600, 1296.560037, 393.140011, 92.944920, X, Y) && !ellipse(26935.685300, 22085.481000, 1296.560037, 358.703210, 88.197920, X, Y) && !ellipse(37148.625061, 21611.235641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19523.627258, 21333.471786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18544.907791, 20807.498535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26888.342400, 20913.825400, 485.011214, 485.011214, 0.000000, X, Y) && !ellipse(31211.137909, 20281.296951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35844.626007, 19978.116501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26827.977000, 19840.832000, 838.464024, 838.464024, 0.000000, X, Y) && !ellipse(26806.577057, 18995.224655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25204.475600, 19062.852400, 443.222413, 443.222413, 0.000000, X, Y) && !ellipse(30848.511353, 18556.563370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26759.614899, 18480.067993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26267.446000, 18345.952000, 579.376817, 256.664807, 63.605000, X, Y) && !ellipse(23382.919434, 17816.820435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26734.458496, 17775.383392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26709.936646, 17085.103653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28203.172913, 16762.477768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26652.955600, 16237.156000, 1175.504034, 1175.504034, 0.000000, X, Y)
[Thu May 31 20:15:48 2012] Writing fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src1.gif
[Thu May 31 20:17:09 2012] Mean detx,y = (155.51, -99.36) 
[Thu May 31 20:17:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 20:20:22 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 20:20:22 2012] Setting source spectrum file to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 31 20:20:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  1 05:02:41 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:02:41 2012] Error reading totcts from fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  1 05:02:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:02:45 2012] Using photon index=1.80, rate=0.928, arf fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  1 05:02:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:02:46 2012] Updating source flux to 2.2e-12
[Fri Jun  1 05:08:40 2012] Reading fit data from xmm0604860201/analysis//spectral/fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun  1 05:08:40 2012] Spectral fit parameter nH value = 3.5443e+21
[Fri Jun  1 05:08:40 2012] Spectral fit parameter PhoIndex value = 5.39914
[Fri Jun  1 05:08:40 2012] Failed to get F(0.3-8.0) from xmm0604860201/analysis//spectral/fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 05:08:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:08:40 2012] Using Nh = 3.5e+21, photon index=5.40, rate=0.928, arf fullrun_pn_xmm0604860201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  1 05:08:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:08:41 2012] Updating source flux to 1.2e-12