[Thu May 31 09:03:56 2012] Detection parameters:
  Position = (301.2, 309.0) = 18 14 14.63 -32 48 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190.4 +/- 28.3
  Background counts = 184.5
  Rate = 0.002 +/- 0.0002

[Thu May 31 09:03:56 2012] Off-axis axis estimate = 0.79'
[Thu May 31 12:46:27 2012] Using EEF radius (= 6.82 ")to estimate initial spatial extent for simple fitting
[Thu May 31 12:46:27 2012] Initial guess for spatial extent in simple fitting = 6.82"
[Thu May 31 12:46:27 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.935
[Thu May 31 12:46:27 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 6.82"
[Thu May 31 13:49:24 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src23.ximg exists
[Thu May 31 13:49:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src23.csv
[Thu May 31 13:49:24 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu May 31 13:49:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src23.csv
[Thu May 31 13:49:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:49:24 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu May 31 13:49:24 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu May 31 13:49:24 2012] Fit fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu May 31 13:49:53 2012] Spatial fit model total counts = 2486.640000, observed total counts = 2492.000000
[Thu May 31 13:49:53 2012] Offset between fit and detection position for source 21 = 7.298226 pixels
[Thu May 31 13:49:53 2012] 2767.642000 total counts/ 2303.190000 bgd. counts: snr = 9.677785
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 7.298226 pixels
  Position = (295.3, 304.6) = 18 14 16.66 -32 48 23.5
  Extent = 13.6 (13.6-27.3)", rotation angle = 0
  Source counts = 464.5 +/- 52.6
  Background counts = 2303.2
  Rate = 0.004 +/- 0.0005
[Thu May 31 13:49:53 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:49:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:49:53 2012] Assessing source extent using major axis lower bound
[Thu May 31 13:49:53 2012] Source does appear to be extended
[Thu May 31 13:49:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 19:18:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 19:18:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 31 19:18:22 2012] Initial guess for spatial extent in simple fitting = 13.64"
[Thu May 31 19:18:22 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.926
[Thu May 31 19:18:22 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 13.64"
[Thu May 31 20:15:03 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src23.ximg exists
[Thu May 31 20:15:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src23.csv
[Thu May 31 20:15:03 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu May 31 20:15:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src23.csv
[Thu May 31 20:15:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 20:15:03 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu May 31 20:15:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Thu May 31 20:15:03 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu May 31 20:15:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Thu May 31 20:15:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 20:15:32 2012] Warning, spatial fit 23 centroid is now closest to src. 18
[Thu May 31 20:15:32 2012] Vigneting correction estimate = 1.000000
[Thu May 31 20:15:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 20:15:32 2012] Assessing source extent using major axis lower bound
[Thu May 31 20:15:32 2012] Source does appear to be extended
[Thu May 31 20:15:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 02:47:41 2012] XMMSAS src. selection expression = ellipse(25640.452000, 26455.262000, 818.676024, 818.676024, 0.000000, X, Y)
[Fri Jun  1 02:47:41 2012] Writing source region out to fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src21_src.reg
[Fri Jun  1 02:47:41 2012] Extracting stamp from image fullrun_mos2_xmm0604860201_pi300-10000_cl_sm2.00.img.gz, (248, 258) - (342, 352)
[Fri Jun  1 02:47:41 2012] XMMSAS bgd. selection expression = annulus(25640.452000, 26455.262000, 1364.460039, 2728.920079, X, Y) && !ellipse(27205.371000, 27426.050400, 1225.396835, 1225.396835, 0.000000, X, Y) && !ellipse(24295.468933, 29108.166199, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27915.187195, 27963.203400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27922.002655, 28784.552643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28027.117920, 26721.337341, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 02:47:41 2012] Writing fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src21.gif
[Fri Jun  1 03:06:26 2012] Mean detx,y = (1417.78, -1036.38) 
[Fri Jun  1 03:06:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 03:06:49 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 03:06:49 2012] Setting source spectrum file to fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jun  1 03:06:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri Jun  1 05:02:50 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:02:50 2012] Error reading totcts from fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jun  1 05:02:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:02:51 2012] Using photon index=1.80, rate=0.00407, arf fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src21.arf
[Fri Jun  1 05:02:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:02:51 2012] Updating source flux to 4.3e-14