[Thu May 31 09:03:56 2012] Detection parameters:
  Position = (279.8, 335.1) = 18 14 21.99 -32 46 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17784.8 +/- 158.1
  Background counts = 185.0
  Rate = 0.2 +/- 0.002

[Thu May 31 09:03:56 2012] Off-axis axis estimate = 2.98'
[Thu May 31 12:46:27 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Thu May 31 12:46:27 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Thu May 31 12:46:27 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.928
[Thu May 31 12:46:27 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.92"
[Thu May 31 13:49:24 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 31 13:49:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src2.csv
[Thu May 31 13:49:24 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 31 13:49:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src2.csv
[Thu May 31 13:49:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:49:24 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 31 13:49:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 31 13:49:24 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 31 13:49:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 31 13:49:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:49:53 2012] Source 2 is offset by 5.777574 and 0.059129 pixels which is larger than
2 X fitted extent = 1.229425 x 1.229425, not incorporating fit results
[Thu May 31 13:49:53 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:49:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:49:53 2012] Assessing source extent using major
[Thu May 31 13:49:53 2012] Source does appear to be extended
[Thu May 31 13:49:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 19:18:22 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Thu May 31 19:18:22 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Thu May 31 19:18:22 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.928
[Thu May 31 19:18:22 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.92"
[Thu May 31 20:15:03 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 31 20:15:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src2.csv
[Thu May 31 20:15:03 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 31 20:15:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src2.csv
[Thu May 31 20:15:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 20:15:03 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 31 20:15:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 31 20:15:03 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 31 20:15:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 31 20:15:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 20:15:32 2012] Spatial fit model total counts = 17547.200000, observed total counts = 15345.000000
[Thu May 31 20:15:32 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 31 20:15:32 2012] Vigneting correction estimate = 1.000000
[Thu May 31 20:15:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 20:15:32 2012] Assessing source extent using major
[Thu May 31 20:15:32 2012] Source does appear to be extended
[Thu May 31 20:15:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 02:47:41 2012] Counts = 17784.779297, rescaling region sizes by 3.000000
[Fri Jun  1 02:47:41 2012] XMMSAS src. selection expression = ellipse(24295.468933, 29108.166199, 1957.500000, 1957.500000, 0.000000, X, Y)
[Fri Jun  1 02:47:41 2012] Writing source region out to fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  1 02:47:41 2012] Extracting stamp from image fullrun_mos2_xmm0604860201_pi300-10000_cl_sm2.00.img.gz, (167, 223) - (392, 448)
[Fri Jun  1 02:47:41 2012] XMMSAS bgd. selection expression = annulus(24295.468933, 29108.166199, 9787.500000, 19575.000000, X, Y) && !ellipse(27205.371000, 27426.050400, 1225.396835, 1225.396835, 0.000000, X, Y) && !ellipse(34521.412506, 34399.541351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15992.628200, 28422.321400, 537.707215, 358.157610, 93.054173, X, Y) && !ellipse(27530.022095, 14377.966751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20365.300751, 15282.308228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36528.962463, 28992.876862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25232.019897, 19048.934570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39120.671967, 21507.133270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34773.252655, 26375.811829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14052.841156, 26748.264648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23014.464460, 16170.835200, 431.916812, 431.916812, 0.000000, X, Y) && !ellipse(33269.032532, 36604.548492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37308.696777, 14118.530563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18551.581928, 27314.065930, 929.576370, 420.748078, 88.514039, X, Y) && !ellipse(26247.361511, 18456.723648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20503.330414, 29780.719635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29963.890940, 16749.965800, 405.770412, 212.059206, 168.219000, X, Y) && !ellipse(28243.254600, 16787.908200, 442.188813, 442.188813, 0.000000, X, Y) && !ellipse(19494.884800, 27983.693000, 572.522416, 292.277608, 302.518000, X, Y) && !ellipse(18617.490982, 20761.101898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27915.187195, 27963.203400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33043.416107, 12079.368500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25640.452000, 26455.262000, 1091.568031, 1091.568031, 0.000000, X, Y) && !ellipse(20745.269958, 11755.903625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18292.102539, 25397.945953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27922.002655, 28784.552643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32687.774933, 40982.447540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38818.710175, 33563.892120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28027.117920, 26721.337341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24253.431000, 37832.660000, 504.260015, 504.260015, 0.000000, X, Y) && !ellipse(26324.086548, 14213.114655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22893.196625, 14387.453171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34153.906006, 13821.345169, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 02:47:41 2012] Writing fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src2.gif
[Fri Jun  1 02:50:48 2012] Mean detx,y = (2839.36, 1447.83) 
[Fri Jun  1 02:50:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 02:58:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 02:58:45 2012] Setting source spectrum file to fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 02:58:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun  1 03:14:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  1 03:14:05 2012] rmf not generated due to insufficient counts
[Fri Jun  1 05:02:50 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:02:50 2012] Error reading totcts from fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 05:02:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:02:51 2012] Using photon index=1.80, rate=0.173, arf fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src2.arf
[Fri Jun  1 05:02:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:02:51 2012] Updating source flux to 1.8e-12
[Fri Jun  1 05:04:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting