[Thu May 31 09:03:56 2012] Detection parameters:
  Position = (279.8, 435.6) = 18 14 21.99 -32 38 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.1 +/- 21.2
  Background counts = 106.6
  Rate = 0.001 +/- 0.0002

[Thu May 31 09:03:56 2012] Off-axis axis estimate = 10.03'
[Thu May 31 12:46:27 2012] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Thu May 31 12:46:27 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Thu May 31 12:46:27 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.071
[Thu May 31 12:46:27 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 11.45"
[Thu May 31 13:49:24 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src31.ximg exists
[Thu May 31 13:49:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src31.csv
[Thu May 31 13:49:24 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu May 31 13:49:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src31.csv
[Thu May 31 13:49:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:49:25 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu May 31 13:49:25 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu May 31 13:49:25 2012] Fit fullrun_mos2_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Thu May 31 13:49:53 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 15.019518 pixels away
[Thu May 31 13:49:53 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:49:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:49:53 2012] Assessing source extent using major
[Thu May 31 13:49:53 2012] Source does appear to be extended
[Thu May 31 13:49:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 19:18:22 2012] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Thu May 31 19:18:22 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Thu May 31 19:18:22 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.071
[Thu May 31 19:18:22 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 11.45"
[Thu May 31 20:15:03 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src30.ximg exists
[Thu May 31 20:15:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src30.csv
[Thu May 31 20:15:03 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src30_1.ximg exists
[Thu May 31 20:15:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src30.csv
[Thu May 31 20:15:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 20:15:03 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Thu May 31 20:15:03 2012] fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Thu May 31 20:15:03 2012] Fit fullrun_mos2_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Thu May 31 20:15:32 2012] Spatial fit model total counts = 689.982000, observed total counts = 690.000000
[Thu May 31 20:15:32 2012] Offset between fit and detection position for source 13 = 0.476619 pixels
[Thu May 31 20:15:32 2012] 695.390200 total counts/ 612.166000 bgd. counts: snr = 3.363683
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.476619 pixels
  Position = (279.3, 435.4) = 18 14 22.15 -32 38 54.6
  Extent = 6.3 (3.9-8.8)", rotation angle = 0
  Source counts = 83.2 +/- 26.4
  Background counts = 612.2
  Rate = 0.0007 +/- 0.0002
[Thu May 31 20:15:32 2012] Vigneting correction estimate = 1.000000
[Thu May 31 20:15:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 20:15:32 2012] Assessing source extent using major axis lower bound
[Thu May 31 20:15:32 2012] Source does appear to be extended
[Thu May 31 20:15:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 02:47:41 2012] XMMSAS src. selection expression = ellipse(24253.431000, 37832.660000, 378.195011, 378.195011, 0.000000, X, Y)
[Fri Jun  1 02:47:41 2012] Writing source region out to fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src13_src.reg
[Fri Jun  1 02:47:41 2012] Extracting stamp from image fullrun_mos2_xmm0604860201_pi300-10000_cl_sm2.00.img.gz, (258, 414) - (301, 457)
[Fri Jun  1 02:47:41 2012] XMMSAS bgd. selection expression = annulus(24253.431000, 37832.660000, 630.325018, 1260.650036, X, Y)
[Fri Jun  1 02:47:41 2012] Writing fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src13.gif
[Fri Jun  1 03:09:06 2012] Mean detx,y = (3550.26, 10162.07) 
[Fri Jun  1 03:09:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 03:09:14 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 03:09:15 2012] Setting source spectrum file to fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun  1 03:09:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Jun  1 04:59:06 2012] Not generating rmf since there are only 83 counts
[Fri Jun  1 04:59:06 2012] rmf not generated due to insufficient counts
[Fri Jun  1 05:02:50 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:02:50 2012] Error reading totcts from fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun  1 05:02:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:02:51 2012] Using photon index=1.80, rate=0.000728, arf fullrun_mos2_xmm0604860201_pi300-10000_pass1_cl_src13.arf
[Fri Jun  1 05:02:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:02:51 2012] Updating source flux to 2e-14
[Fri Jun  1 05:04:31 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting