[Thu May 31 09:03:28 2012] Detection parameters:
  Position = (225.2, 322.5) = 18 14 40.82 -32 47 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.1 +/- 20.0
  Background counts = 138.3
  Rate = 0.002 +/- 0.0003

[Thu May 31 09:03:28 2012] Off-axis axis estimate = 5.59'
[Thu May 31 12:06:41 2012] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Thu May 31 12:06:41 2012] Initial guess for spatial extent in simple fitting = 9.22"
[Thu May 31 12:06:41 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.874
[Thu May 31 12:06:41 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.22"
[Thu May 31 12:46:27 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src15.ximg exists
[Thu May 31 12:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src15.csv
[Thu May 31 12:46:27 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu May 31 12:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src15.csv
[Thu May 31 12:46:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 12:46:27 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu May 31 12:46:27 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu May 31 12:46:27 2012] Fit fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Thu May 31 13:49:47 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 12.415842 pixels away
[Thu May 31 13:49:47 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:49:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:49:47 2012] Assessing source extent using major
[Thu May 31 13:49:47 2012] Source does appear to be extended
[Thu May 31 13:49:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 18:54:04 2012] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Thu May 31 18:54:04 2012] Initial guess for spatial extent in simple fitting = 9.22"
[Thu May 31 18:54:04 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.874
[Thu May 31 18:54:04 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 9.22"
[Thu May 31 19:18:22 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src14.ximg exists
[Thu May 31 19:18:22 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu May 31 19:18:22 2012] Fit fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src14 appears to have run properly
[Thu May 31 19:18:22 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu May 31 19:18:22 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu May 31 19:18:22 2012] Fit fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu May 31 20:15:27 2012] Source 15 is offset by -8.194430 and -3.192972 pixels which is larger than
2 X fitted extent = 1.112032 x 1.112032, not incorporating fit results
[Thu May 31 20:15:27 2012] Vigneting correction estimate = 1.000000
[Thu May 31 20:15:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 20:15:27 2012] Assessing source extent using major
[Thu May 31 20:15:27 2012] Source does appear to be extended
[Thu May 31 20:15:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 00:40:12 2012] XMMSAS src. selection expression = ellipse(19546.748581, 28007.003418, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  1 00:40:12 2012] Writing source region out to fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src15_src.reg
[Fri Jun  1 00:40:12 2012] Extracting stamp from image fullrun_mos1_xmm0604860201_pi300-10000_cl_sm2.00.img.gz, (188, 285) - (263, 360)
[Fri Jun  1 00:40:12 2012] XMMSAS bgd. selection expression = annulus(19546.748581, 28007.003418, 1087.500000, 2175.000000, X, Y) && !ellipse(24298.360260, 29025.679749, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(18535.501022, 27310.196289, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 00:40:12 2012] Writing fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src15.gif
[Fri Jun  1 00:53:44 2012] Mean detx,y = (325.97, -7838.45) 
[Fri Jun  1 00:53:45 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 00:54:03 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 00:54:03 2012] Setting source spectrum file to fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jun  1 00:54:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri Jun  1 02:43:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  1 02:43:07 2012] rmf not generated due to insufficient counts
[Fri Jun  1 05:02:49 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:02:49 2012] Error reading totcts from fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jun  1 05:02:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:02:49 2012] Using photon index=1.80, rate=0.00175, arf fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src15.arf
[Fri Jun  1 05:02:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:02:49 2012] Updating source flux to 3.5e-14
[Fri Jun  1 05:02:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting