[Thu May 31 09:03:28 2012] Detection parameters:
  Position = (315.4, 331.8) = 18 14 9.73 -32 46 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 239.8 +/- 45.4
  Background counts = 191.7
  Rate = 0.003 +/- 0.0005

[Thu May 31 09:03:28 2012] Off-axis axis estimate = 2.71'
[Thu May 31 12:06:41 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Thu May 31 12:06:41 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Thu May 31 12:06:41 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.954
[Thu May 31 12:06:41 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.78"
[Thu May 31 12:46:27 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src12.ximg exists
[Thu May 31 12:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src12.csv
[Thu May 31 12:46:27 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu May 31 12:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src12.csv
[Thu May 31 12:46:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 12:46:27 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu May 31 12:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu May 31 12:46:27 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu May 31 12:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu May 31 12:46:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 13:49:47 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 11.227663 pixels away
[Thu May 31 13:49:47 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:49:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:49:47 2012] Assessing source extent using major
[Thu May 31 13:49:47 2012] Source does appear to be extended
[Thu May 31 13:49:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 18:54:04 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Thu May 31 18:54:04 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Thu May 31 18:54:04 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.954
[Thu May 31 18:54:04 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.78"
[Thu May 31 19:18:22 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src11.ximg exists
[Thu May 31 19:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src11.csv
[Thu May 31 19:18:22 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu May 31 19:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src11.csv
[Thu May 31 19:18:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 19:18:22 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu May 31 19:18:22 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu May 31 19:18:22 2012] Fit fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu May 31 20:15:27 2012] Source 12 is offset by 4.998237 and -8.354397 pixels which is larger than
2 X fitted extent = 7.158299 x 7.158299, not incorporating fit results
[Thu May 31 20:15:27 2012] Vigneting correction estimate = 1.000000
[Thu May 31 20:15:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 20:15:27 2012] Assessing source extent using major
[Thu May 31 20:15:27 2012] Source does appear to be extended
[Thu May 31 20:15:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 00:40:12 2012] XMMSAS src. selection expression = ellipse(27387.072662, 28818.441437, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  1 00:40:12 2012] Writing source region out to fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src12_src.reg
[Fri Jun  1 00:40:12 2012] Extracting stamp from image fullrun_mos1_xmm0604860201_pi300-10000_cl_sm2.00.img.gz, (278, 294) - (353, 369)
[Fri Jun  1 00:40:12 2012] XMMSAS bgd. selection expression = annulus(27387.072662, 28818.441437, 1087.500000, 2175.000000, X, Y) && !ellipse(27207.433000, 27421.932400, 1298.580037, 1298.580037, 0.000000, X, Y) && !ellipse(24298.360260, 29025.679749, 2610.000000, 2610.000000, 0.000000, X, Y)
[Fri Jun  1 00:40:12 2012] Writing fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src12.gif
[Fri Jun  1 00:52:37 2012] Mean detx,y = (1427.22, -73.29) 
[Fri Jun  1 00:52:38 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 00:52:51 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 00:52:52 2012] Setting source spectrum file to fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jun  1 00:52:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Jun  1 02:42:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  1 02:42:36 2012] rmf not generated due to insufficient counts
[Fri Jun  1 05:02:49 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:02:49 2012] Error reading totcts from fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jun  1 05:02:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:02:49 2012] Using photon index=1.80, rate=0.00251, arf fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src12.arf
[Fri Jun  1 05:02:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:02:49 2012] Updating source flux to 2.6e-14
[Fri Jun  1 05:02:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting