[Thu May 31 09:03:27 2012] Detection parameters:
  Position = (313.4, 315.9) = 18 14 10.39 -32 47 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42065.3 +/- 244.2
  Background counts = 190.4
  Rate = 0.3 +/- 0.002

[Thu May 31 09:03:28 2012] Off-axis axis estimate = 1.67'
[Thu May 31 12:06:41 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu May 31 12:06:41 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu May 31 12:06:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.062
[Thu May 31 12:06:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu May 31 12:46:27 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 31 12:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src1.csv
[Thu May 31 12:46:27 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 31 12:46:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src1.csv
[Thu May 31 12:46:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 12:46:27 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 31 12:46:27 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 31 12:46:27 2012] Fit fullrun_mos1_xmm0604860201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 31 13:49:47 2012] Spatial fit model total counts = 34900.000000, observed total counts = 34900.000000
[Thu May 31 13:49:47 2012] Offset between fit and detection position for source 1 = 0.182376 pixels
[Thu May 31 13:49:47 2012] 34883.430000 total counts/ 7897.030000 bgd. counts: snr = 303.677810
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.182376 pixels
  Position = (313.3, 315.8) = 18 14 10.45 -32 47 35.1
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 26986.4 +/- 186.8
  Background counts = 7897.0
  Rate = 0.2 +/- 0.002
[Thu May 31 13:49:47 2012] Vigneting correction estimate = 1.000000
[Thu May 31 13:49:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 13:49:47 2012] Assessing source extent using major axis lower bound
[Thu May 31 13:49:47 2012] Source does appear to be extended
[Thu May 31 13:49:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 18:54:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 18:54:04 2012] Initial guess for spatial extent in simple fitting = 5.40"
[Thu May 31 18:54:04 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.989
[Thu May 31 18:54:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.40"
[Thu May 31 19:18:21 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 31 19:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src1.csv
[Thu May 31 19:18:22 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 31 19:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src1.csv
[Thu May 31 19:18:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 19:18:22 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 31 19:18:22 2012] fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 31 19:18:22 2012] Fit fullrun_mos1_xmm0604860201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 31 20:15:27 2012] Spatial fit model total counts = 34989.100000, observed total counts = 34961.000000
[Thu May 31 20:15:27 2012] Offset between fit and detection position for source 1 = 0.011567 pixels
[Thu May 31 20:15:27 2012] 35105.080000 total counts/ 8047.480000 bgd. counts: snr = 301.619433
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011567 pixels
  Position = (313.3, 315.8) = 18 14 10.45 -32 47 35.2
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 27057.6 +/- 187.4
  Background counts = 8047.5
  Rate = 0.2 +/- 0.002
[Thu May 31 20:15:27 2012] Vigneting correction estimate = 1.000000
[Thu May 31 20:15:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 20:15:27 2012] Assessing source extent using major axis lower bound
[Thu May 31 20:15:27 2012] Source does appear to be extended
[Thu May 31 20:15:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 00:40:11 2012] Counts = 27057.600000, rescaling region sizes by 3.000000
[Fri Jun  1 00:40:11 2012] XMMSAS src. selection expression = ellipse(27207.433000, 27421.932400, 973.935028, 973.935028, 0.000000, X, Y)
[Fri Jun  1 00:40:11 2012] Writing source region out to fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun  1 00:40:11 2012] Extracting stamp from image fullrun_mos1_xmm0604860201_pi300-10000_cl_sm2.00.img.gz, (257, 260) - (369, 372)
[Fri Jun  1 00:40:11 2012] XMMSAS bgd. selection expression = annulus(27207.433000, 27421.932400, 4869.675140, 9739.350280, X, Y) && !ellipse(24298.360260, 29025.679749, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(35302.038910, 33546.891968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33295.560597, 36574.803080, 608.602744, 343.350701, 53.350142, X, Y) && !ellipse(34786.814545, 26380.819214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36506.010540, 28988.024800, 424.353612, 424.353612, 0.000000, X, Y) && !ellipse(27387.072662, 28818.441437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18535.501022, 27310.196289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36021.740356, 19890.755417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19546.748581, 28007.003418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29330.320465, 37901.015228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18534.582382, 20807.008682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24317.606567, 37865.493591, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 00:40:11 2012] Writing fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src1.gif
[Fri Jun  1 00:40:23 2012] Mean detx,y = (163.85, -154.83) 
[Fri Jun  1 00:40:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 00:42:09 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 00:42:09 2012] Setting source spectrum file to fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  1 00:42:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  1 05:02:49 2012] Updating aperture counts using extracted products
[Fri Jun  1 05:02:49 2012] Error reading totcts from fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  1 05:02:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:02:49 2012] Using photon index=1.80, rate=0.237, arf fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  1 05:02:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:02:49 2012] Updating source flux to 2.2e-12
[Fri Jun  1 05:04:31 2012] Reading fit data from xmm0604860201/analysis//spectral/fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun  1 05:04:31 2012] Spectral fit parameter nH value = 3.50172e+21
[Fri Jun  1 05:04:31 2012] Spectral fit parameter PhoIndex value = 5.38184
[Fri Jun  1 05:04:31 2012] Failed to get F(0.3-8.0) from xmm0604860201/analysis//spectral/fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 05:04:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 05:04:31 2012] Using Nh = 3.5e+21, photon index=5.38, rate=0.237, arf fullrun_mos1_xmm0604860201_pi300-10000_pass1_cl_src1.arf
[Fri Jun  1 05:04:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 05:04:31 2012] Updating source flux to 1.4e-12