[Tue Jun 25 02:07:37 2013] Detection parameters:
  Position = (319.6, 205.0) = 12 35 13.64 -14 3 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 879.1 +/- 42.9
  Background counts = 94.2
  Rate = 0.02 +/- 0.001

[Tue Jun 25 02:07:39 2013] Off-axis axis estimate = 6.95'
[Tue Jun 25 02:12:30 2013] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 02:12:30 2013] Initial guess for spatial extent in simple fitting = 9.90"
[Tue Jun 25 02:12:30 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.973
[Tue Jun 25 02:12:30 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 9.90"
[Tue Jun 25 03:20:25 2013] fullrun_pn_xmm0604830201_pi300-10000_cl_pass0_src10.ximg exists
[Tue Jun 25 03:20:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604830201_pi300-10000_cl_pass0_src10.csv
[Tue Jun 25 03:20:25 2013] fullrun_pn_xmm0604830201_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Jun 25 03:20:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604830201_pi300-10000_cl_pass0_src10.csv
[Tue Jun 25 03:20:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604830201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604830201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 03:20:26 2013] fullrun_pn_xmm0604830201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Jun 25 03:20:26 2013] fullrun_pn_xmm0604830201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jun 25 03:20:26 2013] Fit fullrun_pn_xmm0604830201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Jun 25 05:09:19 2013] Spatial fit model total counts = 3451.480000, observed total counts = 3293.000000
[Tue Jun 25 05:09:19 2013] Offset between fit and detection position for source 12 = 1.421115 pixels
[Tue Jun 25 05:09:19 2013] 3416.740000 total counts/ 1811.650000 bgd. counts: snr = 37.710496
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.421115 pixels
  Position = (320.8, 205.8) = 12 35 13.29 -14 3 33.4
  Extent = 10.1 (9.1-11.0)", rotation angle = 0
  Source counts = 1605.1 +/- 58.5
  Background counts = 1811.7
  Rate = 0.04 +/- 0.001
[Tue Jun 25 05:09:19 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 05:09:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 05:09:19 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 05:09:19 2013] Source does appear to be extended
[Tue Jun 25 05:09:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 05:09:19 2013] Source is confused with source 1
[Tue Jun 25 05:09:44 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 25 05:09:44 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Tue Jun 25 05:09:44 2013] source mask rpix=2.3, npix_max = 31, mask sum = 31, frac = 0.979
[Tue Jun 25 05:09:44 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 10.07"
[Tue Jun 25 06:05:54 2013] fullrun_pn_xmm0604830201_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jun 25 06:05:54 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604830201_pi300-10000_cl_pass1_src10.csv
[Tue Jun 25 06:05:54 2013] fullrun_pn_xmm0604830201_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jun 25 06:05:54 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604830201_pi300-10000_cl_pass1_src10.csv
[Tue Jun 25 06:05:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604830201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604830201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 06:05:54 2013] fullrun_pn_xmm0604830201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jun 25 06:05:54 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604830201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jun 25 06:05:54 2013] fullrun_pn_xmm0604830201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jun 25 06:05:54 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604830201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Jun 25 06:05:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604830201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604830201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 07:55:31 2013] Warning, spatial fit 10 centroid is now closest to src. 1
[Tue Jun 25 07:55:31 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 07:55:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 07:55:31 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 07:55:31 2013] Source does appear to be extended
[Tue Jun 25 07:55:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 07:55:54 2013] Counts = 1605.090000, rescaling region sizes by 2.000000
[Tue Jun 25 07:55:54 2013] XMMSAS src. selection expression = ellipse(27858.835000, 17857.630740, 1207.920035, 1207.920035, 0.000000, X, Y)
[Tue Jun 25 07:55:54 2013] Writing source region out to fullrun_pn_xmm0604830201_pi300-10000_pass1_cl_src12_src.reg
[Tue Jun 25 07:55:54 2013] Extracting stamp from image fullrun_pn_xmm0604830201_pi300-10000_cl_sm2.00.img.gz, (251, 136) - (390, 275)
[Tue Jun 25 07:55:54 2013] XMMSAS bgd. selection expression = annulus(27858.835000, 17857.630740, 4026.400116, 8052.800232, X, Y) && !ellipse(28400.452209, 18073.184753, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23156.259583, 24994.328400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22518.781738, 11406.921265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28709.909149, 13485.632645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21100.315079, 26194.587494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28291.114200, 25532.253600, 1086.952031, 477.074414, 94.553192, X, Y) && !ellipse(35556.929688, 25302.795013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32049.803253, 25173.256134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34683.296740, 23889.665200, 594.336817, 594.336817, 0.000000, X, Y) && !ellipse(23567.850200, 22707.923600, 327.673609, 327.673609, 0.000000, X, Y) && !ellipse(30169.519200, 19727.900600, 442.109613, 442.109613, 0.000000, X, Y) && !ellipse(32585.941284, 18568.280014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25115.519867, 17033.784592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28981.818665, 16931.261963, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 25 07:55:54 2013] Writing fullrun_pn_xmm0604830201_pi300-10000_pass1_cl_src12.gif
[Tue Jun 25 08:14:43 2013] Mean detx,y = (-2100.27, 9666.07) 
[Tue Jun 25 08:14:48 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 08:17:26 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 08:17:26 2013] Setting source spectrum file to fullrun_pn_xmm0604830201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jun 25 08:17:26 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604830201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue Jun 25 10:17:34 2013] Updating aperture counts using extracted products
[Tue Jun 25 10:17:34 2013] Total counts from fullrun_pn_xmm0604830201_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 15915.00
[Tue Jun 25 10:17:34 2013] Total counts from fullrun_pn_xmm0604830201_pi300-10000_pass1_cl_src12_bgd.pi.gz = 37294.00
[Tue Jun 25 10:17:34 2013] Got source and background scale factors 3589028.000000, 97402788.000000
[Tue Jun 25 10:17:34 2013] User source parameters:
  Position = (320.8, 205.8) = 12 35 13.29 -14 3 33.4
  Extent = 10.1 (9.1-11.0)", rotation angle = 0
  Source aperture counts = 14540.8 +/- 127.2
  Background aperture counts = 1374.2
  Rate = 0.4 +/- 0.003

[Tue Jun 25 10:17:41 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 10:17:41 2013] Using photon index=1.80, rate=0.0401, arf fullrun_pn_xmm0604830201_pi300-10000_pass1_cl_src12.arf
[Tue Jun 25 10:17:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 10:17:41 2013] Updating source flux to 2.5e-13
[Tue Jun 25 10:18:02 2013] Flag c found in src. 12 procflags, skipping spectral fitting
[Tue Jun 25 10:18:04 2013] xmm0604830201/analysis//spectral/fullrun_pn_xmm0604830201_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete