[Tue Jun 25 02:08:06 2013] Detection parameters:
  Position = (293.4, 356.9) = 12 35 21.48 -13 52 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.6 +/- 13.4
  Background counts = 23.9
  Rate = 0.002 +/- 0.0003

[Tue Jun 25 02:08:07 2013] Off-axis axis estimate = 4.25'
[Tue Jun 25 03:20:26 2013] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 03:20:26 2013] Initial guess for spatial extent in simple fitting = 8.56"
[Tue Jun 25 03:20:26 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Tue Jun 25 03:20:26 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 8.56"
[Tue Jun 25 04:10:42 2013] fullrun_mos1_xmm0604830201_pi300-10000_cl_pass0_src17.ximg exists
[Tue Jun 25 04:10:42 2013] fullrun_mos1_xmm0604830201_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Jun 25 04:10:42 2013] Fit fullrun_mos1_xmm0604830201_pi300-10000_cl_pass0_src17 appears to have run properly
[Tue Jun 25 04:10:43 2013] fullrun_mos1_xmm0604830201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Jun 25 04:10:43 2013] fullrun_mos1_xmm0604830201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Jun 25 04:10:43 2013] Fit fullrun_mos1_xmm0604830201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Jun 25 05:09:25 2013] Spatial fit model total counts = 311.071000, observed total counts = 289.000000
[Tue Jun 25 05:09:25 2013] Offset between fit and detection position for source 18 = 0.102505 pixels
[Tue Jun 25 05:09:25 2013] 308.528000 total counts/ 255.159000 bgd. counts: snr = 3.341055
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.102505 pixels
  Position = (293.3, 357.0) = 12 35 21.50 -13 52 35.8
  Extent = 4.0 (2.4-5.7)", rotation angle = 0
  Source counts = 53.4 +/- 17.6
  Background counts = 255.2
  Rate = 0.001 +/- 0.0004
[Tue Jun 25 05:09:25 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 05:09:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 05:09:25 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 05:09:25 2013] Source does appear to be extended
[Tue Jun 25 05:09:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 06:05:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 25 06:05:55 2013] Initial guess for spatial extent in simple fitting = 4.04"
[Tue Jun 25 06:05:55 2013] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.734
[Tue Jun 25 06:05:55 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 4.04"
[Tue Jun 25 06:54:57 2013] fullrun_mos1_xmm0604830201_pi300-10000_cl_pass1_src17.ximg exists
[Tue Jun 25 06:54:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604830201_pi300-10000_cl_pass1_src17.csv
[Tue Jun 25 06:54:57 2013] fullrun_mos1_xmm0604830201_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Jun 25 06:54:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604830201_pi300-10000_cl_pass1_src17.csv
[Tue Jun 25 06:54:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604830201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604830201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 06:54:58 2013] fullrun_mos1_xmm0604830201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Jun 25 06:54:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604830201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue Jun 25 06:54:58 2013] fullrun_mos1_xmm0604830201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Jun 25 06:54:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604830201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue Jun 25 06:54:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604830201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604830201_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 07:55:37 2013] Spatial fit model total counts = 316.430000, observed total counts = 285.000000
[Tue Jun 25 07:55:37 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 25 07:55:37 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 07:55:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 07:55:37 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 07:55:37 2013] Source does appear to be extended
[Tue Jun 25 07:55:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 09:04:00 2013] XMMSAS src. selection expression = ellipse(25470.040600, 31008.832450, 242.567407, 242.567407, 0.000000, X, Y)
[Tue Jun 25 09:04:00 2013] Writing source region out to fullrun_mos1_xmm0604830201_pi300-10000_pass1_cl_src18_src.reg
[Tue Jun 25 09:04:00 2013] Extracting stamp from image fullrun_mos1_xmm0604830201_pi300-10000_cl_sm2.00.img.gz, (279, 343) - (307, 371)
[Tue Jun 25 09:04:00 2013] XMMSAS bgd. selection expression = annulus(25470.040600, 31008.832450, 404.279012, 808.558023, X, Y)
[Tue Jun 25 09:04:00 2013] Writing fullrun_mos1_xmm0604830201_pi300-10000_pass1_cl_src18.gif
[Tue Jun 25 09:09:15 2013] Mean detx,y = (3414.67, 321.41) 
[Tue Jun 25 09:09:16 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 09:09:23 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 09:09:23 2013] Setting source spectrum file to fullrun_mos1_xmm0604830201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Jun 25 09:09:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604830201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue Jun 25 09:22:06 2013] Not generating rmf since there are only 53 counts
[Tue Jun 25 09:22:06 2013] rmf not generated due to insufficient counts
[Tue Jun 25 10:17:43 2013] Updating aperture counts using extracted products
[Tue Jun 25 10:17:43 2013] Total counts from fullrun_mos1_xmm0604830201_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 79.00
[Tue Jun 25 10:17:44 2013] Total counts from fullrun_mos1_xmm0604830201_pi300-10000_pass1_cl_src18_bgd.pi.gz = 179.00
[Tue Jun 25 10:17:44 2013] Got source and background scale factors 184000.000000, 1418012.000000
[Tue Jun 25 10:17:44 2013] User source parameters:
  Position = (293.3, 357.0) = 12 35 21.50 -13 52 35.8
  Extent = 4.0 (2.4-5.7)", rotation angle = 0
  Source aperture counts = 55.8 +/- 9.9
  Background aperture counts = 23.2
  Rate = 0.001 +/- 0.0002

[Tue Jun 25 10:17:46 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 10:17:46 2013] Using photon index=1.80, rate=0.00118, arf fullrun_mos1_xmm0604830201_pi300-10000_pass1_cl_src18.arf
[Tue Jun 25 10:17:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 10:17:46 2013] Updating source flux to 1.7e-14
[Tue Jun 25 10:17:54 2013] Flag p found in src. 18 procflags, skipping spectral fitting
[Tue Jun 25 10:17:54 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 25 10:17:56 2013] xmm0604830201/analysis//spectral/fullrun_mos1_xmm0604830201_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete