[Wed Nov 30 10:43:25 2011] Detection parameters:
  Position = (288.3, 264.1) = 18 40 59.71 -5 36 32.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.2 +/- 24.1
  Background counts = 107.7
  Rate = 0.003 +/- 0.0006

[Wed Nov 30 10:43:25 2011] Off-axis axis estimate = 2.60'
[Wed Nov 30 10:49:44 2011] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 10:49:44 2011] Initial guess for spatial extent in simple fitting = 7.73"
[Wed Nov 30 10:49:44 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965
[Wed Nov 30 10:49:44 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 7.73"
[Wed Nov 30 13:23:02 2011] fullrun_pn_xmm0604820301_pi300-10000_cl_pass0_src41.ximg exists
[Wed Nov 30 13:23:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604820301_pi300-10000_cl_pass0_src41.csv
[Wed Nov 30 13:23:02 2011] fullrun_pn_xmm0604820301_pi300-10000_cl_pass0_src41_1.ximg exists
[Wed Nov 30 13:23:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604820301_pi300-10000_cl_pass0_src41.csv
[Wed Nov 30 13:23:02 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604820301_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604820301_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 13:23:03 2011] fullrun_pn_xmm0604820301_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Wed Nov 30 13:23:03 2011] fullrun_pn_xmm0604820301_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Wed Nov 30 13:23:03 2011] Fit fullrun_pn_xmm0604820301_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Wed Nov 30 14:24:40 2011] Source 42 is offset by 2.566247 and -8.028284 pixels which is larger than
2 X fitted extent = 3.243425 x 3.243425, not incorporating fit results
[Wed Nov 30 14:24:40 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 14:24:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 14:24:40 2011] Assessing source extent using major
[Wed Nov 30 14:24:40 2011] Source does appear to be extended
[Wed Nov 30 14:24:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 14:24:40 2011] Source is confused with source 44
[Wed Nov 30 14:25:03 2011] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 14:25:03 2011] Initial guess for spatial extent in simple fitting = 7.73"
[Wed Nov 30 14:25:03 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965
[Wed Nov 30 14:25:03 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 7.73"
[Wed Nov 30 16:20:34 2011] fullrun_pn_xmm0604820301_pi300-10000_cl_pass1_src37.ximg exists
[Wed Nov 30 16:20:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604820301_pi300-10000_cl_pass1_src37.csv
[Wed Nov 30 16:20:34 2011] fullrun_pn_xmm0604820301_pi300-10000_cl_pass1_src37_1.ximg exists
[Wed Nov 30 16:20:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604820301_pi300-10000_cl_pass1_src37.csv
[Wed Nov 30 16:20:34 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604820301_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604820301_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 16:20:34 2011] fullrun_pn_xmm0604820301_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Wed Nov 30 16:20:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604820301_pi300-10000_cl_pass1_tfrozen_src37.csv
[Wed Nov 30 16:20:34 2011] fullrun_pn_xmm0604820301_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Wed Nov 30 16:20:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604820301_pi300-10000_cl_pass1_tfrozen_src37.csv
[Wed Nov 30 16:20:34 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604820301_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604820301_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:29:07 2011] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 12.394945 pixels away
[Wed Nov 30 17:29:07 2011] Source 42 is offset by 2.968821 and -7.120261 pixels which is larger than
2 X fitted extent = 2.089545 x 2.089545, not incorporating fit results
[Wed Nov 30 17:29:07 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:29:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:29:07 2011] Assessing source extent using major
[Wed Nov 30 17:29:07 2011] Source does appear to be extended
[Wed Nov 30 17:29:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:29:30 2011] XMMSAS src. selection expression = ellipse(25034.087463, 22926.209259, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Nov 30 17:29:30 2011] Writing source region out to fullrun_pn_xmm0604820301_pi300-10000_pass1_cl_src42_src.reg
[Wed Nov 30 17:29:30 2011] Extracting stamp from image fullrun_pn_xmm0604820301_pi300-10000_cl_sm2.00.img.gz, (251, 227) - (326, 302)
[Wed Nov 30 17:29:30 2011] XMMSAS bgd. selection expression = annulus(25034.087463, 22926.209259, 1087.500000, 2175.000000, X, Y) && !ellipse(24835.416010, 24186.666400, 1563.100845, 1563.100845, 0.000000, X, Y) && !ellipse(22503.671120, 24613.783200, 585.028017, 267.114408, 47.322000, X, Y) && !ellipse(23859.328000, 22494.680000, 788.974423, 788.974423, 0.000000, X, Y)
[Wed Nov 30 17:29:30 2011] Writing fullrun_pn_xmm0604820301_pi300-10000_pass1_cl_src42.gif
[Wed Nov 30 18:19:15 2011] Mean detx,y = (-111.15, -1479.55) 
[Wed Nov 30 18:19:24 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 18:20:16 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 18:20:16 2011] Setting source spectrum file to fullrun_pn_xmm0604820301_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Wed Nov 30 18:20:16 2011] Setting bgd. spectrum file to fullrun_pn_xmm0604820301_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Wed Nov 30 20:00:53 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Nov 30 20:00:53 2011] rmf not generated due to insufficient counts
[Wed Nov 30 21:05:51 2011] Updating aperture counts using extracted products
[Wed Nov 30 21:05:51 2011] Error reading totcts from fullrun_pn_xmm0604820301_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Wed Nov 30 21:05:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 21:05:53 2011] Using photon index=1.80, rate=0.00297, arf fullrun_pn_xmm0604820301_pi300-10000_pass1_cl_src42.arf
[Wed Nov 30 21:05:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 21:05:53 2011] Updating source flux to 8.2e-15
[Wed Nov 30 21:07:46 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting