[Wed Nov 30 10:43:55 2011] Detection parameters:
  Position = (274.4, 286.9) = 18 41 3.75 -5 35 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.4 +/- 15.4
  Background counts = 38.4
  Rate = 0.002 +/- 0.0004

[Wed Nov 30 10:43:56 2011] Off-axis axis estimate = 1.93'
[Wed Nov 30 13:23:03 2011] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 13:23:03 2011] Initial guess for spatial extent in simple fitting = 7.39"
[Wed Nov 30 13:23:03 2011] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.775
[Wed Nov 30 13:23:03 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 7.39"
[Wed Nov 30 13:59:50 2011] fullrun_mos1_xmm0604820301_pi300-10000_cl_pass0_src9.ximg exists
[Wed Nov 30 13:59:50 2011] fullrun_mos1_xmm0604820301_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Nov 30 13:59:50 2011] Fit fullrun_mos1_xmm0604820301_pi300-10000_cl_pass0_src9 appears to have run properly
[Wed Nov 30 13:59:50 2011] fullrun_mos1_xmm0604820301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Nov 30 13:59:50 2011] fullrun_mos1_xmm0604820301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Nov 30 13:59:50 2011] Fit fullrun_mos1_xmm0604820301_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Nov 30 14:24:43 2011] Spatial fit model total counts = 1039.070000, observed total counts = 1063.000000
[Wed Nov 30 14:24:43 2011] Offset between fit and detection position for source 5 = 8.839410 pixels
[Wed Nov 30 14:24:43 2011] 1091.928000 total counts/ 676.077000 bgd. counts: snr = 15.993358
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 8.839410 pixels
  Position = (280.3, 280.2) = 18 41 2.06 -5 35 39.0
  Extent = 14.8 (14.7-29.6)", rotation angle = 0
  Source counts = 415.9 +/- 33.0
  Background counts = 676.1
  Rate = 0.009 +/- 0.0007
[Wed Nov 30 14:24:43 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 14:24:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 14:24:43 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 14:24:43 2011] Source does appear to be extended
[Wed Nov 30 14:24:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 14:24:43 2011] Source is confused with source 3
[Wed Nov 30 16:20:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 16:20:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 30 16:20:34 2011] Initial guess for spatial extent in simple fitting = 14.79"
[Wed Nov 30 16:20:34 2011] source mask rpix=3.4, npix_max = 60, mask sum = 48, frac = 0.789
[Wed Nov 30 16:20:34 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 14.79"
[Wed Nov 30 17:05:46 2011] fullrun_mos1_xmm0604820301_pi300-10000_cl_pass1_src9.ximg exists
[Wed Nov 30 17:05:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820301_pi300-10000_cl_pass1_src9.csv
[Wed Nov 30 17:05:46 2011] fullrun_mos1_xmm0604820301_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Nov 30 17:05:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820301_pi300-10000_cl_pass1_src9.csv
[Wed Nov 30 17:05:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604820301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604820301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:05:46 2011] fullrun_mos1_xmm0604820301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Nov 30 17:05:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Nov 30 17:05:46 2011] fullrun_mos1_xmm0604820301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Nov 30 17:05:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Nov 30 17:05:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604820301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604820301_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:29:12 2011] Source 5 is offset by -5.420000 and -1.474529 pixels which is larger than
2 X fitted extent = 5.170023 x 2.910506, not incorporating fit results
[Wed Nov 30 17:29:12 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.620328 pixels away
[Wed Nov 30 17:29:12 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:29:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:29:12 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 17:29:12 2011] Source does appear to be extended
[Wed Nov 30 17:29:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 20:11:52 2011] XMMSAS src. selection expression = ellipse(24333.704000, 24328.960000, 887.310026, 887.310026, 0.000000, X, Y)
[Wed Nov 30 20:11:52 2011] Writing source region out to fullrun_mos1_xmm0604820301_pi300-10000_pass1_cl_src5_src.reg
[Wed Nov 30 20:11:52 2011] Extracting stamp from image fullrun_mos1_xmm0604820301_pi300-10000_cl_sm2.00.img.gz, (229, 229) - (331, 331)
[Wed Nov 30 20:11:52 2011] XMMSAS bgd. selection expression = annulus(24333.704000, 24328.960000, 1478.850043, 2957.700085, X, Y) && !ellipse(24848.168280, 24203.124800, 1299.621637, 1299.621637, 0.000000, X, Y) && !ellipse(25419.111847, 24957.333221, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 20:11:52 2011] Writing fullrun_mos1_xmm0604820301_pi300-10000_pass1_cl_src5.gif
[Wed Nov 30 20:19:38 2011] Mean detx,y = (284.18, -231.56) 
[Wed Nov 30 20:19:40 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 20:20:02 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 20:20:02 2011] Setting source spectrum file to fullrun_mos1_xmm0604820301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Nov 30 20:20:02 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0604820301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Nov 30 21:05:54 2011] Updating aperture counts using extracted products
[Wed Nov 30 21:05:54 2011] Error reading totcts from fullrun_mos1_xmm0604820301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Nov 30 21:05:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 21:05:54 2011] Using photon index=1.80, rate=0.00912, arf fullrun_mos1_xmm0604820301_pi300-10000_pass1_cl_src5.arf
[Wed Nov 30 21:05:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 21:05:54 2011] Updating source flux to 8.6e-14
[Wed Nov 30 21:05:57 2011] Flag b found in src. 5 procflags, skipping spectral fitting
[Wed Nov 30 21:05:57 2011] Flag c found in src. 5 procflags, skipping spectral fitting