[Fri Feb 24 10:25:02 2012] Detection parameters:
  Position = (436.7, 426.9) = 18 17 51.86 -16 52 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.8 +/- 19.7
  Background counts = 179.0
  Rate = 0.002 +/- 0.0004

[Fri Feb 24 10:25:15 2012] Off-axis axis estimate = 13.69'
[Fri Feb 24 10:35:13 2012] Using EEF radius (= 13.27 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 10:35:13 2012] Initial guess for spatial extent in simple fitting = 13.27"
[Fri Feb 24 10:35:13 2012] source mask rpix=3.1, npix_max = 50, mask sum = 33, frac = 0.654
[Fri Feb 24 10:35:13 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 13.27"
[Fri Feb 24 19:00:43 2012] fullrun_pn_xmm0604820101_pi300-10000_cl_pass0_src31.ximg exists
[Fri Feb 24 19:00:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604820101_pi300-10000_cl_pass0_src31.csv
[Fri Feb 24 19:00:43 2012] fullrun_pn_xmm0604820101_pi300-10000_cl_pass0_src31_1.ximg exists
[Fri Feb 24 19:00:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604820101_pi300-10000_cl_pass0_src31.csv
[Fri Feb 24 19:00:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604820101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604820101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 19:00:46 2012] fullrun_pn_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Fri Feb 24 19:00:46 2012] fullrun_pn_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Fri Feb 24 19:00:46 2012] Fit fullrun_pn_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sat Feb 25 11:22:23 2012] Spatial fit model total counts = 1554.280000, observed total counts = 1574.000000
[Sat Feb 25 11:22:23 2012] Offset between fit and detection position for source 37 = 4.318933 pixels
[Sat Feb 25 11:22:23 2012] Warning, changing simple spatial fit ID from 31 to 14
[Sat Feb 25 11:22:23 2012] 1466.003000 total counts/ 1076.540000 bgd. counts: snr = 11.870011
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 4.318933 pixels
  Position = (433.5, 429.8) = 18 17 52.84 -16 51 52.3
  Extent = 26.3 (25.6-26.6)" x 10.1 (8.7-11.4)", rotation angle = 97 (90-105) degrees
  Source counts = 389.5 +/- 38.3
  Background counts = 1076.5
  Rate = 0.01 +/- 0.001
[Sat Feb 25 11:22:24 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 11:22:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 11:22:24 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 11:22:24 2012] Source does appear to be extended
[Sat Feb 25 11:22:24 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.25
[Sat Feb 25 11:22:24 2012] Source is asymmetric
[Sat Feb 25 11:22:24 2012] Source is confused with source 19
[Sat Feb 25 11:24:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 11:24:15 2012] Initial guess for spatial extent in simple fitting = 18.16"
[Sat Feb 25 11:24:15 2012] source mask rpix=4.2, npix_max = 87, mask sum = 81, frac = 0.927
[Sat Feb 25 11:24:15 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 18.16"
[Sat Feb 25 23:17:27 2012] fullrun_pn_xmm0604820101_pi300-10000_cl_pass1_src28.ximg exists
[Sat Feb 25 23:17:27 2012] fullrun_pn_xmm0604820101_pi300-10000_cl_pass1_src28_1.ximg exists
[Sat Feb 25 23:17:27 2012] Fit fullrun_pn_xmm0604820101_pi300-10000_cl_pass1_src28 appears to have run properly
[Sat Feb 25 23:17:29 2012] fullrun_pn_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sat Feb 25 23:17:29 2012] fullrun_pn_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sat Feb 25 23:17:29 2012] Fit fullrun_pn_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sun Feb 26 16:07:34 2012] Source 37 is offset by 0.835770 and -4.472414 pixels which is larger than
2 X fitted extent = 1.503701 x 1.503701, not incorporating fit results
[Sun Feb 26 16:07:34 2012] Warning, spatial fit 28 centroid is now closest to src. 155
[Sun Feb 26 16:07:35 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 16:07:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 16:07:35 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 16:07:35 2012] Source does appear to be extended
[Sun Feb 26 16:07:35 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.25
[Sun Feb 26 16:07:35 2012] Source is asymmetric
[Sun Feb 26 16:09:21 2012] XMMSAS src. selection expression = ellipse(37666.264000, 37340.394000, 1575.882045, 603.024017, 96.893000, X, Y)
[Sun Feb 26 16:09:21 2012] Writing source region out to fullrun_pn_xmm0604820101_pi300-10000_pass1_cl_src37_src.reg
[Sun Feb 26 16:09:21 2012] Extracting stamp from image fullrun_pn_xmm0604820101_pi300-10000_cl_sm2.00.img.gz, (343, 339) - (524, 520)
[Sun Feb 26 16:09:22 2012] XMMSAS bgd. selection expression = annulus(37666.264000, 37340.394000, 2626.470076, 5252.940151, X, Y) && !ellipse(32655.991577, 36033.159637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35393.329437, 38066.723572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34800.729480, 38434.337340, 504.748815, 504.748815, 0.000000, X, Y) && !ellipse(34600.661000, 37269.786000, 876.760025, 876.760025, 0.000000, X, Y) && !ellipse(33577.786000, 37201.712000, 1897.072055, 1897.072055, 0.000000, X, Y) && !ellipse(33781.550828, 37443.501050, 2133.470149, 1814.835775, 145.785702, X, Y) && !ellipse(38571.204000, 36721.008000, 1004.376029, 1004.376029, 0.000000, X, Y) && !ellipse(37145.234589, 32893.866272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34054.199036, 38419.821228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31962.628021, 38416.526337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33337.099518, 37886.532043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34354.820000, 38045.990000, 3725.504107, 3725.504107, 0.000000, X, Y) && !ellipse(32298.865800, 37099.608000, 1450.640042, 1450.640042, 0.000000, X, Y) && !ellipse(33089.126440, 36669.012003, 2905.208084, 363.151210, 131.873677, X, Y) && !ellipse(33480.229492, 36228.941498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31631.344086, 36114.939850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32934.796204, 35651.100922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31941.302826, 35345.414124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39788.394200, 35387.615600, 2140.448062, 891.048026, 231.095000, X, Y) && !ellipse(36627.607422, 35120.809265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32192.930573, 34643.557129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40933.491455, 32763.419373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34292.787933, 32329.449524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40378.082000, 32206.604000, 873.680025, 873.680025, 0.000000, X, Y) && !ellipse(36805.924500, 31520.122253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32953.022717, 30425.652724, 2127.600061, 484.738866, 90.000000, X, Y) && !ellipse(35705.959137, 38362.772614, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 26 16:09:22 2012] Writing fullrun_pn_xmm0604820101_pi300-10000_pass1_cl_src37.gif
[Sun Feb 26 17:33:45 2012] Mean detx,y = (-12454.23, 12787.61) 
[Sun Feb 26 17:33:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 17:35:05 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 17:35:06 2012] Setting source spectrum file to fullrun_pn_xmm0604820101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun Feb 26 17:35:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0604820101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Mon Feb 27 21:17:49 2012] Updating aperture counts using extracted products
[Mon Feb 27 21:17:49 2012] Error reading totcts from fullrun_pn_xmm0604820101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Mon Feb 27 21:17:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 21:17:55 2012] Using photon index=1.80, rate=0.0113, arf fullrun_pn_xmm0604820101_pi300-10000_pass1_cl_src37.arf
[Mon Feb 27 21:17:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 21:17:55 2012] Updating source flux to 1.1e-13
[Mon Feb 27 21:39:19 2012] Flag b found in src. 37 procflags, skipping spectral fitting
[Mon Feb 27 21:39:19 2012] Flag c found in src. 37 procflags, skipping spectral fitting