[Fri Feb 24 10:25:35 2012] Detection parameters:
  Position = (315.1, 134.8) = 18 18 28.71 -17 13 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.8 +/- 12.2
  Background counts = 36.0
  Rate = 0.001 +/- 0.0003

[Fri Feb 24 10:25:36 2012] Off-axis axis estimate = 11.93'
[Sat Feb 25 05:13:09 2012] Using EEF radius (= 12.39 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 05:13:09 2012] Initial guess for spatial extent in simple fitting = 12.39"
[Sat Feb 25 05:13:09 2012] source mask rpix=2.8, npix_max = 44, mask sum = 40, frac = 0.892
[Sat Feb 25 05:13:09 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 12.39"
[Sat Feb 25 11:21:38 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src61.ximg exists
[Sat Feb 25 11:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src61.csv
[Sat Feb 25 11:21:38 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src61_1.ximg exists
[Sat Feb 25 11:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src61.csv
[Sat Feb 25 11:21:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 11:21:42 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sat Feb 25 11:21:42 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sat Feb 25 11:21:42 2012] Fit fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Sat Feb 25 11:23:23 2012] Spatial fit model total counts = 715.175000, observed total counts = 712.000000
[Sat Feb 25 11:23:23 2012] Offset between fit and detection position for source 63 = 0.321520 pixels
[Sat Feb 25 11:23:23 2012] Warning, changing simple spatial fit ID from 61 to 31
[Sat Feb 25 11:23:23 2012] 544.787200 total counts/ 514.860000 bgd. counts: snr = 1.318929
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.321520 pixels
  Position = (315.0, 135.1) = 18 18 28.74 -17 13 14.4
  Extent = 3.0" x 3.0", rotation angle = 0
  Source counts = 29.9 +/- 23.3
  Background counts = 514.9
  Rate = 0.0007 +/- 0.0005
  Deleting source due to low Poisson probability