[Fri Feb 24 10:25:35 2012] Detection parameters:
  Position = (308.0, 151.9) = 18 18 30.86 -17 12 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.4 +/- 15.6
  Background counts = 38.3
  Rate = 0.002 +/- 0.0003

[Fri Feb 24 10:25:36 2012] Off-axis axis estimate = 10.65'
[Sat Feb 25 05:13:09 2012] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 05:13:09 2012] Initial guess for spatial extent in simple fitting = 11.75"
[Sat Feb 25 05:13:09 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.878
[Sat Feb 25 05:13:09 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 11.75"
[Sat Feb 25 11:21:37 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src37.ximg exists
[Sat Feb 25 11:21:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src37.csv
[Sat Feb 25 11:21:37 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src37_1.ximg exists
[Sat Feb 25 11:21:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src37.csv
[Sat Feb 25 11:21:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 11:21:41 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sat Feb 25 11:21:41 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sat Feb 25 11:21:41 2012] Fit fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Sat Feb 25 11:23:23 2012] Warning, spatial fit 37 centroid is now closest to src. 54
[Sat Feb 25 11:23:23 2012] Source 57 is offset by -0.283683 and -6.872368 pixels which is larger than
2 X fitted extent = 2.121710 x 2.121710, not incorporating fit results
[Sat Feb 25 11:23:24 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 11:23:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 11:23:24 2012] Assessing source extent using major
[Sat Feb 25 11:23:24 2012] Source does appear to be extended
[Sat Feb 25 11:23:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 11:23:24 2012] Source is confused with source 60
[Sat Feb 25 11:23:24 2012] Source is confused with source 55
[Sun Feb 26 08:56:42 2012] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 08:56:42 2012] Initial guess for spatial extent in simple fitting = 11.75"
[Sun Feb 26 08:56:42 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.878
[Sun Feb 26 08:56:42 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 11.75"
[Sun Feb 26 16:06:52 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_src35.ximg exists
[Sun Feb 26 16:06:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_src35.csv
[Sun Feb 26 16:06:52 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun Feb 26 16:06:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_src35.csv
[Sun Feb 26 16:06:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 16:06:54 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun Feb 26 16:06:54 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun Feb 26 16:06:54 2012] Fit fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Sun Feb 26 16:08:31 2012] Warning, spatial fit 35 centroid is now closest to src. 60
[Sun Feb 26 16:08:31 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 10.192269 pixels away
[Sun Feb 26 16:08:31 2012] Source 57 is offset by -5.646925 and 5.752230 pixels which is larger than
2 X fitted extent = 1.790303 x 1.790303, not incorporating fit results
[Sun Feb 26 16:08:31 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 16:08:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 16:08:31 2012] Assessing source extent using major
[Sun Feb 26 16:08:31 2012] Source does appear to be extended
[Sun Feb 26 16:08:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 18:06:57 2012] XMMSAS src. selection expression = ellipse(26748.511566, 13167.738022, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 18:06:57 2012] Writing source region out to fullrun_mos2_xmm0604820101_pi300-10000_pass1_cl_src57_src.reg
[Mon Feb 27 18:06:57 2012] Extracting stamp from image fullrun_mos2_xmm0604820101_pi300-10000_cl_sm2.00.img.gz, (271, 114) - (346, 189)
[Mon Feb 27 18:06:57 2012] XMMSAS bgd. selection expression = annulus(26748.511566, 13167.738022, 1087.500000, 2175.000000, X, Y) && !ellipse(26096.251600, 15529.522000, 876.488025, 876.488025, 0.000000, X, Y) && !ellipse(26054.916200, 15583.174000, 1353.024039, 1353.024039, 0.000000, X, Y) && !ellipse(25060.975600, 15278.984000, 2398.016069, 960.168028, 90.000000, X, Y) && !ellipse(27115.022000, 12291.758000, 586.531217, 586.531217, 0.000000, X, Y) && !ellipse(26263.758972, 14468.622726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27709.679962, 11102.946960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28016.365492, 15502.772747, 1747.040050, 218.380006, 71.822517, X, Y) && !ellipse(28407.686000, 9788.308000, 2085.200060, 260.650408, 59.562000, X, Y) && !ellipse(26929.332000, 12729.164000, 363.407210, 363.407210, 0.000000, X, Y) && !ellipse(26619.675662, 13583.885510, 1411.928041, 416.844813, 79.717209, X, Y) && !ellipse(24957.143000, 15822.368000, 1199.008035, 1199.008035, 0.000000, X, Y) && !ellipse(25971.684200, 12897.204000, 1176.408034, 1176.408034, 0.000000, X, Y) && !ellipse(26561.748840, 11682.320816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26141.543000, 12459.034000, 1060.688031, 1060.688031, 0.000000, X, Y) && !ellipse(25499.482200, 14238.585000, 487.238414, 487.238414, 0.000000, X, Y) && !ellipse(25862.544220, 13168.399124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28250.504120, 14827.684906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29206.823200, 12578.446000, 1876.328054, 234.541607, 64.377000, X, Y) && !ellipse(28725.313629, 13513.418854, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 18:06:57 2012] Writing fullrun_mos2_xmm0604820101_pi300-10000_pass1_cl_src57.gif
[Mon Feb 27 18:29:16 2012] Mean detx,y = (2433.01, 11092.75) 
[Mon Feb 27 18:29:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 18:29:30 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 18:29:30 2012] Setting source spectrum file to fullrun_mos2_xmm0604820101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Mon Feb 27 18:29:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604820101_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Mon Feb 27 20:19:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 20:19:19 2012] rmf not generated due to insufficient counts
[Mon Feb 27 21:18:16 2012] Updating aperture counts using extracted products
[Mon Feb 27 21:18:16 2012] Error reading totcts from fullrun_mos2_xmm0604820101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Mon Feb 27 21:18:18 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 21:18:18 2012] Using photon index=1.80, rate=0.00228, arf fullrun_mos2_xmm0604820101_pi300-10000_pass1_cl_src57.arf
[Mon Feb 27 21:18:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 21:18:18 2012] Updating source flux to 4.9e-14
[Mon Feb 27 21:28:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting