[Fri Feb 24 10:25:32 2012] Detection parameters:
  Position = (332.6, 401.0) = 18 18 23.41 -16 54 0.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.2 +/- 14.3
  Background counts = 43.9
  Rate = 0.003 +/- 0.0006

[Fri Feb 24 10:25:36 2012] Off-axis axis estimate = 7.84'
[Sat Feb 25 05:13:09 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 05:13:09 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Sat Feb 25 05:13:09 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.905
[Sat Feb 25 05:13:09 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.35"
[Sat Feb 25 11:21:37 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src23.ximg exists
[Sat Feb 25 11:21:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src23.csv
[Sat Feb 25 11:21:37 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat Feb 25 11:21:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src23.csv
[Sat Feb 25 11:21:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 11:21:41 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat Feb 25 11:21:41 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Feb 25 11:21:41 2012] Fit fullrun_mos2_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sat Feb 25 11:23:23 2012] Warning, spatial fit 23 centroid is now closest to src. 32
[Sat Feb 25 11:23:23 2012] Source 31 is offset by 4.897867 and 8.506466 pixels which is larger than
2 X fitted extent = 1.453926 x 1.453926, not incorporating fit results
[Sat Feb 25 11:23:24 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 11:23:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 11:23:24 2012] Assessing source extent using major
[Sat Feb 25 11:23:24 2012] Source does appear to be extended
[Sat Feb 25 11:23:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 11:23:24 2012] Source is confused with source 27
[Sun Feb 26 08:56:42 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 08:56:42 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Sun Feb 26 08:56:42 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.905
[Sun Feb 26 08:56:42 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 10.35"
[Sun Feb 26 16:06:51 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_src21.ximg exists
[Sun Feb 26 16:06:51 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Feb 26 16:06:51 2012] Fit fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_src21 appears to have run properly
[Sun Feb 26 16:06:54 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Feb 26 16:06:54 2012] fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Feb 26 16:06:54 2012] Fit fullrun_mos2_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Feb 26 16:08:31 2012] Source 31 is offset by 7.224964 and 5.942561 pixels which is larger than
2 X fitted extent = 1.704938 x 1.704938, not incorporating fit results
[Sun Feb 26 16:08:31 2012] Source 31 is offset by 4.924401 and 8.514768 pixels which is larger than
2 X fitted extent = 1.454809 x 1.454809, not incorporating fit results
[Sun Feb 26 16:08:31 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 16:08:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 16:08:31 2012] Assessing source extent using major
[Sun Feb 26 16:08:31 2012] Source does appear to be extended
[Sun Feb 26 16:08:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 18:06:57 2012] XMMSAS src. selection expression = ellipse(28888.767853, 34838.170776, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 18:06:57 2012] Writing source region out to fullrun_mos2_xmm0604820101_pi300-10000_pass1_cl_src31_src.reg
[Mon Feb 27 18:06:57 2012] Extracting stamp from image fullrun_mos2_xmm0604820101_pi300-10000_cl_sm2.00.img.gz, (295, 363) - (370, 438)
[Mon Feb 27 18:06:57 2012] XMMSAS bgd. selection expression = annulus(28888.767853, 34838.170776, 1087.500000, 2175.000000, X, Y) && !ellipse(30708.442000, 34684.482000, 1313.584038, 1313.584038, 0.000000, X, Y) && !ellipse(29742.484558, 33282.716553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29699.692000, 33601.768000, 2644.616076, 1243.600036, 316.866000, X, Y) && !ellipse(29302.665680, 33528.004089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28502.000000, 31779.000000, 899.000026, 718.827221, 90.000000, X, Y) && !ellipse(31737.882446, 37705.647552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28544.080000, 35246.496000, 1596.432046, 1596.432046, 0.000000, X, Y) && !ellipse(30923.713444, 34990.800800, 1722.248050, 215.281606, 127.787000, X, Y) && !ellipse(28094.085724, 32125.110504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29721.905426, 36833.074829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30406.365298, 37657.581456, 1849.728053, 404.126014, 309.569036, X, Y) && !ellipse(29014.362000, 35695.260000, 2352.888068, 2352.888068, 0.000000, X, Y) && !ellipse(28631.004000, 32767.670000, 1546.792045, 1344.048039, 346.066000, X, Y) && !ellipse(31351.536000, 35522.098000, 1722.248050, 1722.248050, 0.000000, X, Y) && !ellipse(31755.442810, 36820.790009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27322.980600, 31432.055800, 1411.928041, 1411.928041, 0.000000, X, Y) && !ellipse(31348.166626, 36402.046753, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 18:06:57 2012] Writing fullrun_mos2_xmm0604820101_pi300-10000_pass1_cl_src31.gif
[Mon Feb 27 18:19:26 2012] Mean detx,y = (3841.73, -10709.60) 
[Mon Feb 27 18:19:29 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 18:19:46 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 18:19:46 2012] Setting source spectrum file to fullrun_mos2_xmm0604820101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon Feb 27 18:19:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0604820101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Mon Feb 27 19:49:27 2012] Not generating rmf since there are only 75 counts
[Mon Feb 27 19:49:27 2012] rmf not generated due to insufficient counts
[Mon Feb 27 21:18:15 2012] Updating aperture counts using extracted products
[Mon Feb 27 21:18:15 2012] Error reading totcts from fullrun_mos2_xmm0604820101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon Feb 27 21:18:18 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 21:18:18 2012] Using photon index=1.80, rate=0.00302, arf fullrun_mos2_xmm0604820101_pi300-10000_pass1_cl_src31.arf
[Mon Feb 27 21:18:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 21:18:18 2012] Updating source flux to 5.5e-14
[Mon Feb 27 21:28:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting