[Fri Feb 24 10:25:20 2012] Detection parameters:
  Position = (457.1, 343.9) = 18 17 45.65 -16 58 8.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.6 +/- 20.5
  Background counts = 40.8
  Rate = 0.004 +/- 0.0005

[Fri Feb 24 10:25:28 2012] Off-axis axis estimate = 11.97'
[Fri Feb 24 19:00:49 2012] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 19:00:49 2012] Initial guess for spatial extent in simple fitting = 12.41"
[Fri Feb 24 19:00:49 2012] source mask rpix=2.9, npix_max = 44, mask sum = 36, frac = 0.800
[Fri Feb 24 19:00:49 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 12.41"
[Sat Feb 25 05:13:05 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src79.ximg exists
[Sat Feb 25 05:13:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src79.csv
[Sat Feb 25 05:13:05 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src79_1.ximg exists
[Sat Feb 25 05:13:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src79.csv
[Sat Feb 25 05:13:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 05:13:08 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Sat Feb 25 05:13:08 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Sat Feb 25 05:13:08 2012] Fit fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Sat Feb 25 11:23:01 2012] Warning, spatial fit 79 centroid is now closest to src. 29
[Sat Feb 25 11:23:02 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 11:23:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 11:23:02 2012] Assessing source extent using major
[Sat Feb 25 11:23:02 2012] Source does appear to be extended
[Sat Feb 25 11:23:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 11:23:02 2012] Source is confused with source 30
[Sat Feb 25 23:17:32 2012] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 23:17:32 2012] Initial guess for spatial extent in simple fitting = 12.41"
[Sat Feb 25 23:17:32 2012] source mask rpix=2.9, npix_max = 44, mask sum = 36, frac = 0.800
[Sat Feb 25 23:17:32 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 12.41"
[Sun Feb 26 08:56:37 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src77.ximg exists
[Sun Feb 26 08:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src77.csv
[Sun Feb 26 08:56:37 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src77_1.ximg exists
[Sun Feb 26 08:56:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src77.csv
[Sun Feb 26 08:56:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 08:56:41 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Sun Feb 26 08:56:41 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Sun Feb 26 08:56:41 2012] Fit fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Sun Feb 26 16:08:09 2012] Warning, spatial fit 77 centroid is now closest to src. 46
[Sun Feb 26 16:08:09 2012] Warning: source 87 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 14.503431 pixels away
[Sun Feb 26 16:08:09 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 16:08:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 16:08:09 2012] Assessing source extent using major
[Sun Feb 26 16:08:09 2012] Source does appear to be extended
[Sun Feb 26 16:08:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 12:22:57 2012] XMMSAS src. selection expression = ellipse(39722.413116, 29871.500397, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 12:22:57 2012] Writing source region out to fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src34_src.reg
[Mon Feb 27 12:22:57 2012] Extracting stamp from image fullrun_mos1_xmm0604820101_pi300-10000_cl_sm2.00.img.gz, (420, 306) - (495, 381)
[Mon Feb 27 12:22:57 2012] XMMSAS bgd. selection expression = annulus(39722.413116, 29871.500397, 1087.500000, 2175.000000, X, Y) && !ellipse(36694.632000, 31738.154000, 1396.400040, 1396.400040, 0.000000, X, Y) && !ellipse(38852.780000, 28381.919000, 344.125610, 344.125610, 0.000000, X, Y) && !ellipse(37039.795410, 32153.936157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39446.977742, 29435.031466, 1524.880044, 190.609605, 121.241860, X, Y) && !ellipse(38545.279327, 27634.152344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39983.081238, 30220.713745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40345.282000, 30810.894000, 302.634409, 302.634409, 0.000000, X, Y) && !ellipse(37244.070709, 32534.842590, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 12:22:57 2012] Writing fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src34.gif
[Mon Feb 27 13:39:34 2012] Mean detx,y = (-5725.88, -15044.26) 
[Mon Feb 27 13:39:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 13:40:08 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 13:40:09 2012] Setting source spectrum file to fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon Feb 27 13:40:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Mon Feb 27 17:21:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 17:21:50 2012] rmf not generated due to insufficient counts
[Mon Feb 27 21:18:06 2012] Updating aperture counts using extracted products
[Mon Feb 27 21:18:06 2012] Error reading totcts from fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon Feb 27 21:18:12 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 21:18:12 2012] Using photon index=1.80, rate=0.0044, arf fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src34.arf
[Mon Feb 27 21:18:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 21:18:12 2012] Updating source flux to 1.4e-13
[Mon Feb 27 21:18:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting