[Fri Feb 24 10:25:19 2012] Detection parameters:
  Position = (426.3, 370.1) = 18 17 55.01 -16 56 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 217.4 +/- 21.0
  Background counts = 48.0
  Rate = 0.005 +/- 0.0005

[Fri Feb 24 10:25:28 2012] Off-axis axis estimate = 10.63'
[Fri Feb 24 19:00:49 2012] Using EEF radius (= 11.74 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 19:00:49 2012] Initial guess for spatial extent in simple fitting = 11.74"
[Fri Feb 24 19:00:49 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.026
[Fri Feb 24 19:00:49 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 11.74"
[Sat Feb 25 05:13:05 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src71.ximg exists
[Sat Feb 25 05:13:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src71.csv
[Sat Feb 25 05:13:05 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src71_1.ximg exists
[Sat Feb 25 05:13:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src71.csv
[Sat Feb 25 05:13:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 05:13:08 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Sat Feb 25 05:13:08 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Sat Feb 25 05:13:08 2012] Fit fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Sat Feb 25 11:23:00 2012] Source 26 is offset by 2.248154 and -0.963194 pixels which is larger than
2 X fitted extent = 1.303605 x 1.303605, not incorporating fit results
[Sat Feb 25 11:23:01 2012] Warning, spatial fit 71 centroid is now closest to src. 24
[Sat Feb 25 11:23:02 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 11:23:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 11:23:02 2012] Assessing source extent using major
[Sat Feb 25 11:23:02 2012] Source does appear to be extended
[Sat Feb 25 11:23:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 11:23:02 2012] Source is confused with source 24
[Sat Feb 25 23:17:32 2012] Using EEF radius (= 11.74 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 23:17:32 2012] Initial guess for spatial extent in simple fitting = 11.74"
[Sat Feb 25 23:17:32 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.026
[Sat Feb 25 23:17:32 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 11.74"
[Sun Feb 26 08:56:36 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src69.ximg exists
[Sun Feb 26 08:56:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src69.csv
[Sun Feb 26 08:56:36 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src69_1.ximg exists
[Sun Feb 26 08:56:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src69.csv
[Sun Feb 26 08:56:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 08:56:40 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Sun Feb 26 08:56:40 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Sun Feb 26 08:56:40 2012] Fit fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Sun Feb 26 16:08:09 2012] Warning, spatial fit 69 centroid is now closest to src. 28
[Sun Feb 26 16:08:09 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 16:08:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 16:08:09 2012] Assessing source extent using major
[Sun Feb 26 16:08:09 2012] Source does appear to be extended
[Sun Feb 26 16:08:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 12:22:57 2012] XMMSAS src. selection expression = ellipse(37039.795410, 32153.936157, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 12:22:57 2012] Writing source region out to fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src26_src.reg
[Mon Feb 27 12:22:57 2012] Extracting stamp from image fullrun_mos1_xmm0604820101_pi300-10000_cl_sm2.00.img.gz, (389, 333) - (464, 408)
[Mon Feb 27 12:22:57 2012] XMMSAS bgd. selection expression = annulus(37039.795410, 32153.936157, 1087.500000, 2175.000000, X, Y) && !ellipse(36623.378000, 33550.678000, 1194.176034, 1194.176034, 0.000000, X, Y) && !ellipse(37529.239441, 34681.001007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37004.744000, 34097.360000, 1412.784041, 1412.784041, 0.000000, X, Y) && !ellipse(36694.632000, 31738.154000, 1396.400040, 1396.400040, 0.000000, X, Y) && !ellipse(35112.442000, 34863.964000, 900.576026, 900.576026, 0.000000, X, Y) && !ellipse(35864.456421, 30326.861816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34567.275000, 34196.644000, 2002.664058, 250.332807, 129.650000, X, Y) && !ellipse(34144.629333, 33693.069916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35305.129364, 29261.390594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39446.977742, 29435.031466, 1524.880044, 190.609605, 121.241860, X, Y) && !ellipse(39722.413116, 29871.500397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34773.956238, 34399.100616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37927.966431, 35068.847687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39983.081238, 30220.713745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37244.070709, 32534.842590, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 12:22:57 2012] Writing fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src26.gif
[Mon Feb 27 13:26:25 2012] Mean detx,y = (-7922.38, -12265.46) 
[Mon Feb 27 13:26:27 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 13:26:41 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 13:26:41 2012] Setting source spectrum file to fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Feb 27 13:26:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Feb 27 17:05:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 17:05:14 2012] rmf not generated due to insufficient counts
[Mon Feb 27 21:18:05 2012] Updating aperture counts using extracted products
[Mon Feb 27 21:18:05 2012] Error reading totcts from fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Feb 27 21:18:12 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 21:18:12 2012] Using photon index=1.80, rate=0.00477, arf fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src26.arf
[Mon Feb 27 21:18:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 21:18:12 2012] Updating source flux to 1.4e-13
[Mon Feb 27 21:18:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting