[Fri Feb 24 10:25:18 2012] Detection parameters:
  Position = (382.8, 395.1) = 18 18 8.19 -16 54 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 305.6 +/- 25.4
  Background counts = 62.5
  Rate = 0.007 +/- 0.0006

[Fri Feb 24 10:25:28 2012] Off-axis axis estimate = 9.30'
[Fri Feb 24 19:00:49 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 19:00:49 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Fri Feb 24 19:00:49 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.969
[Fri Feb 24 19:00:49 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 11.08"
[Sat Feb 25 05:13:04 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src40.ximg exists
[Sat Feb 25 05:13:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src40.csv
[Sat Feb 25 05:13:04 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src40_1.ximg exists
[Sat Feb 25 05:13:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src40.csv
[Sat Feb 25 05:13:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 05:13:07 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Sat Feb 25 05:13:07 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Sat Feb 25 05:13:07 2012] Fit fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Sat Feb 25 11:23:00 2012] Warning, spatial fit 40 centroid is now closest to src. 12
[Sat Feb 25 11:23:02 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 11:23:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 11:23:02 2012] Assessing source extent using major
[Sat Feb 25 11:23:02 2012] Source does appear to be extended
[Sat Feb 25 11:23:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 11:23:02 2012] Source is confused with source 14
[Sat Feb 25 11:23:02 2012] Source is confused with source 21
[Sat Feb 25 11:23:02 2012] Source is confused with source 18
[Sat Feb 25 11:23:02 2012] Source is confused with source 19
[Sat Feb 25 23:17:32 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 23:17:32 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Sat Feb 25 23:17:32 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.969
[Sat Feb 25 23:17:32 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 11.08"
[Sun Feb 26 08:56:36 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src39.ximg exists
[Sun Feb 26 08:56:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src39.csv
[Sun Feb 26 08:56:36 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src39_1.ximg exists
[Sun Feb 26 08:56:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src39.csv
[Sun Feb 26 08:56:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 08:56:39 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sun Feb 26 08:56:39 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sun Feb 26 08:56:39 2012] Fit fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sun Feb 26 16:08:08 2012] Source 17 is offset by 3.176696 and -1.516999 pixels which is larger than
2 X fitted extent = 2.732497 x 2.732497, not incorporating fit results
[Sun Feb 26 16:08:08 2012] Warning, spatial fit 39 centroid is now closest to src. 19
[Sun Feb 26 16:08:08 2012] Spatial fit model total counts = 1315.960000, observed total counts = 1308.000000
[Sun Feb 26 16:08:08 2012] Offset between fit and detection position for source 17 = 0.370216 pixels
[Sun Feb 26 16:08:08 2012] Warning, changing simple spatial fit ID from 39 to 52
[Sun Feb 26 16:08:08 2012] 1283.838000 total counts/ 642.139000 bgd. counts: snr = 25.323098
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.370216 pixels
  Position = (382.8, 395.5) = 18 18 8.21 -16 54 21.5
  Extent = 14.6 (13.4-20.1)", rotation angle = 0
  Source counts = 641.7 +/- 35.8
  Background counts = 642.1
  Rate = 0.01 +/- 0.0008
[Sun Feb 26 16:08:09 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 16:08:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 16:08:09 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 16:08:09 2012] Source does appear to be extended
[Sun Feb 26 16:08:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 12:22:55 2012] XMMSAS src. selection expression = ellipse(33253.412000, 34359.260000, 878.376025, 878.376025, 0.000000, X, Y)
[Mon Feb 27 12:22:55 2012] Writing source region out to fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src17_src.reg
[Mon Feb 27 12:22:55 2012] Extracting stamp from image fullrun_mos1_xmm0604820101_pi300-10000_cl_sm2.00.img.gz, (332, 345) - (433, 446)
[Mon Feb 27 12:22:55 2012] XMMSAS bgd. selection expression = annulus(33253.412000, 34359.260000, 1463.960042, 2927.920084, X, Y) && !ellipse(36623.378000, 33550.678000, 1194.176034, 1194.176034, 0.000000, X, Y) && !ellipse(37004.744000, 34097.360000, 1412.784041, 1412.784041, 0.000000, X, Y) && !ellipse(31913.994000, 32534.324000, 1663.624048, 1663.624048, 0.000000, X, Y) && !ellipse(33807.788000, 35052.350000, 690.563220, 690.563220, 0.000000, X, Y) && !ellipse(32317.642609, 32994.964478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35241.854800, 36738.533600, 721.344821, 721.344821, 0.000000, X, Y) && !ellipse(34917.448000, 36344.592000, 1901.816055, 1901.816055, 0.000000, X, Y) && !ellipse(35785.525055, 35528.069519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36694.632000, 31738.154000, 1396.400040, 1396.400040, 0.000000, X, Y) && !ellipse(33435.874000, 34612.476000, 1371.080039, 1371.080039, 0.000000, X, Y) && !ellipse(32551.071800, 33355.287400, 1694.888049, 211.860806, 123.879000, X, Y) && !ellipse(35112.442000, 34863.964000, 900.576026, 900.576026, 0.000000, X, Y) && !ellipse(34567.275000, 34196.644000, 2002.664058, 250.332807, 129.650000, X, Y) && !ellipse(34413.735138, 35883.246063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34144.629333, 33693.069916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37039.795410, 32153.936157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32935.768000, 33843.326000, 1766.272051, 1766.272051, 0.000000, X, Y) && !ellipse(34773.956238, 34399.100616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33347.614600, 32620.904000, 357.456010, 357.456010, 0.000000, X, Y) && !ellipse(32030.510000, 32778.178000, 1204.824035, 1204.824035, 0.000000, X, Y)
[Mon Feb 27 12:22:55 2012] Writing fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src17.gif
[Mon Feb 27 13:06:19 2012] Mean detx,y = (-10039.56, -8493.23) 
[Mon Feb 27 13:06:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 13:06:52 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 13:06:53 2012] Setting source spectrum file to fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Feb 27 13:06:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Feb 27 21:18:03 2012] Updating aperture counts using extracted products
[Mon Feb 27 21:18:03 2012] Error reading totcts from fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Feb 27 21:18:10 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 21:18:10 2012] Using photon index=1.80, rate=0.0141, arf fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src17.arf
[Mon Feb 27 21:18:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 21:18:10 2012] Updating source flux to 3.1e-13
[Mon Feb 27 21:18:24 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Mon Feb 27 21:18:24 2012] Flag c found in src. 17 procflags, skipping spectral fitting