[Fri Feb 24 10:25:26 2012] Detection parameters:
  Position = (394.4, 169.0) = 18 18 4.64 -17 10 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 330.4 +/- 25.6
  Background counts = 53.3
  Rate = 0.007 +/- 0.0006

[Fri Feb 24 10:25:28 2012] Off-axis axis estimate = 11.68'
[Fri Feb 24 19:00:49 2012] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 19:00:49 2012] Initial guess for spatial extent in simple fitting = 12.27"
[Fri Feb 24 19:00:49 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.952
[Fri Feb 24 19:00:49 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 12.27"
[Sat Feb 25 05:13:04 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src33.ximg exists
[Sat Feb 25 05:13:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src33.csv
[Sat Feb 25 05:13:04 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat Feb 25 05:13:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src33.csv
[Sat Feb 25 05:13:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 05:13:07 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat Feb 25 05:13:07 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat Feb 25 05:13:07 2012] Fit fullrun_mos1_xmm0604820101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sat Feb 25 11:23:00 2012] Warning, spatial fit 33 centroid is now closest to src. 109
[Sat Feb 25 11:23:00 2012] Source 101 is offset by -3.252458 and 3.534682 pixels which is larger than
2 X fitted extent = 1.477329 x 1.477329, not incorporating fit results
[Sat Feb 25 11:23:00 2012] Source 101 is offset by -0.931111 and 3.043740 pixels which is larger than
2 X fitted extent = 2.791412 x 2.791412, not incorporating fit results
[Sat Feb 25 11:23:02 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 11:23:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 11:23:02 2012] Assessing source extent using major
[Sat Feb 25 11:23:02 2012] Source does appear to be extended
[Sat Feb 25 11:23:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 23:17:32 2012] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 23:17:32 2012] Initial guess for spatial extent in simple fitting = 12.27"
[Sat Feb 25 23:17:32 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.952
[Sat Feb 25 23:17:32 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 12.27"
[Sun Feb 26 08:56:36 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src33.ximg exists
[Sun Feb 26 08:56:36 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src33_1.ximg exists
[Sun Feb 26 08:56:36 2012] Fit fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_src33 appears to have run properly
[Sun Feb 26 08:56:39 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sun Feb 26 08:56:39 2012] fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sun Feb 26 08:56:39 2012] Fit fullrun_mos1_xmm0604820101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Sun Feb 26 16:08:08 2012] Warning, spatial fit 33 centroid is now closest to src. 88
[Sun Feb 26 16:08:08 2012] Source 101 is offset by -3.261654 and 3.068935 pixels which is larger than
2 X fitted extent = 1.477329 x 1.477329, not incorporating fit results
[Sun Feb 26 16:08:09 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 16:08:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 16:08:09 2012] Assessing source extent using major
[Sun Feb 26 16:08:09 2012] Source does appear to be extended
[Sun Feb 26 16:08:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 12:22:54 2012] XMMSAS src. selection expression = ellipse(34265.064117, 14651.911346, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 12:22:54 2012] Writing source region out to fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src101_src.reg
[Mon Feb 27 12:22:54 2012] Extracting stamp from image fullrun_mos1_xmm0604820101_pi300-10000_cl_sm2.00.img.gz, (357, 131) - (432, 206)
[Mon Feb 27 12:22:54 2012] XMMSAS bgd. selection expression = annulus(34265.064117, 14651.911346, 1087.500000, 2175.000000, X, Y) && !ellipse(33816.180969, 15788.302383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35066.946686, 12993.384903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33988.704773, 15265.446136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34810.988000, 13368.656000, 554.790416, 554.790416, 0.000000, X, Y) && !ellipse(34599.090698, 13865.438568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35523.845367, 12140.677109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36663.200745, 14471.826019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37224.957153, 13281.848526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33827.762207, 11969.041412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36974.545410, 13693.841370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34315.116730, 16283.084351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35528.810272, 13609.163193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35269.857300, 14137.410477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34928.205475, 14813.228271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34595.036469, 15579.117935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34756.294983, 15175.311874, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 12:22:54 2012] Writing fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src101.gif
[Mon Feb 27 12:56:47 2012] Mean detx,y = (9627.82, -10005.97) 
[Mon Feb 27 12:56:50 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 12:57:09 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 12:57:10 2012] Setting source spectrum file to fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Mon Feb 27 12:57:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src101_bgd.pi.gz
[Mon Feb 27 15:40:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 15:40:36 2012] rmf not generated due to insufficient counts
[Mon Feb 27 21:18:03 2012] Updating aperture counts using extracted products
[Mon Feb 27 21:18:03 2012] Error reading totcts from fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Mon Feb 27 21:18:10 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 21:18:10 2012] Using photon index=1.80, rate=0.00725, arf fullrun_mos1_xmm0604820101_pi300-10000_pass1_cl_src101.arf
[Mon Feb 27 21:18:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 21:18:10 2012] Updating source flux to 1.8e-13
[Mon Feb 27 21:18:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting