[Sat Jun 29 11:38:05 2013] Detection parameters:
  Position = (365.6, 472.5) = 8 15 46.60 48 37 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.4 +/- 14.4
  Background counts = 91.3
  Rate = 0.0008 +/- 0.0002

[Sat Jun 29 11:38:05 2013] Off-axis axis estimate = 13.53'
[Sat Jun 29 11:38:29 2013] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:29 2013] Initial guess for spatial extent in simple fitting = 13.19"
[Sat Jun 29 11:38:29 2013] source mask rpix=3.0, npix_max = 49, mask sum = 37, frac = 0.741
[Sat Jun 29 11:38:29 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 13.19"
[Sat Jun 29 11:38:30 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src54.ximg exists
[Sat Jun 29 11:38:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src54.csv
[Sat Jun 29 11:38:30 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src54_1.ximg exists
[Sat Jun 29 11:38:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src54.csv
[Sat Jun 29 11:38:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:30 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sat Jun 29 11:38:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sat Jun 29 11:38:30 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sat Jun 29 11:38:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sat Jun 29 11:38:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:39 2013] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 16.344335 pixels away
[Sat Jun 29 11:38:39 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:38:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:38:39 2013] Assessing source extent using major
[Sat Jun 29 11:38:39 2013] Source does appear to be extended
[Sat Jun 29 11:38:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:38:57 2013] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:57 2013] Initial guess for spatial extent in simple fitting = 13.19"
[Sat Jun 29 11:38:57 2013] source mask rpix=3.0, npix_max = 49, mask sum = 37, frac = 0.741
[Sat Jun 29 11:38:57 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 13.19"
[Sat Jun 29 11:38:57 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src54.ximg exists
[Sat Jun 29 11:38:57 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src54.csv
[Sat Jun 29 11:38:57 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src54_1.ximg exists
[Sat Jun 29 11:38:57 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src54.csv
[Sat Jun 29 11:38:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:58 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Sat Jun 29 11:38:58 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Sat Jun 29 11:38:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:39:07 2013] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 16.367905 pixels away
[Sat Jun 29 11:39:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:39:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:39:07 2013] Assessing source extent using major
[Sat Jun 29 11:39:07 2013] Source does appear to be extended
[Sat Jun 29 11:39:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:39:25 2013] XMMSAS src. selection expression = ellipse(31762.197205, 41061.097473, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 29 11:39:25 2013] Not overwriting source region fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57_src.reg
[Sat Jun 29 11:39:25 2013] Extracting stamp from image fullrun_pn_xmm0604810101_pi300-10000_cl_sm2.00.img.gz, (328, 435) - (403, 510)
[Sat Jun 29 11:39:25 2013] XMMSAS bgd. selection expression = annulus(31762.197205, 41061.097473, 1087.500000, 2175.000000, X, Y) && !ellipse(28973.253540, 40280.871979, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 29 11:39:25 2013] Writing fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57.gif
[Sat Jun 29 11:39:36 2013] ../../xmm0604810101/products/events/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57_src.evt and ../../xmm0604810101/products/events/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57_bgd.evt exist, delete to re-create
[Sat Jun 29 11:39:36 2013] Mean detx,y = (-11042.11, 14049.51) 
[Sat Jun 29 11:39:36 2013] ../../xmm0604810101/products/images/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57_src.img and ../../xmm0604810101/products/images/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57_bgd.img exist, delete to re-create
[Sat Jun 29 11:39:36 2013] ../../xmm0604810101/products/spectra/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57_src.pi and ../../xmm0604810101/products/spectra/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57_bgd.pi exist, delete to re-create
[Sat Jun 29 11:39:36 2013] Setting source spectrum file to fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57_src.pi.gz
[Sat Jun 29 11:39:36 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Sat Jun 29 11:39:36 2013] ../../xmm0604810101/products/lightcurves/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57_src.lc and ../../xmm0604810101/products/lightcurves/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57_bgd.lc exist, delete to re-create
[Sat Jun 29 11:39:46 2013] Not generating rmf since there are only 65 counts
[Sat Jun 29 11:39:46 2013] rmf not generated due to insufficient counts
[Sat Jun 29 11:54:46 2013] Updating aperture counts using extracted products
[Sat Jun 29 11:54:46 2013] Total counts from fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57_src.pi.gz = 424.00
[Sat Jun 29 11:54:46 2013] Total counts from fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57_bgd.pi.gz = 2312.00
[Sat Jun 29 11:54:46 2013] Got source and background scale factors 531299.000000, 3008242.000000
[Sat Jun 29 11:54:46 2013] User source parameters:
  Position = (365.6, 472.5) = 8 15 46.60 48 37 51.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 15.7 +/- 21.6
  Background aperture counts = 408.3
  Rate = 0.0002 +/- 0.0003

[Sat Jun 29 11:54:46 2013] Updating counts from extracted products
[Sat Jun 29 11:54:46 2013] Set source signif. to 15.67/20.21 = 0.78
[Sat Jun 29 11:54:46 2013] No arf file for this source, not re-computing flux
[Sat Jun 29 11:54:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 29 11:54:58 2013] xmm0604810101/analysis//spectral/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src57_pl.csv not found, spectral fit skipped or did not complete