[Sat Jun 29 11:38:05 2013] Detection parameters:
  Position = (447.4, 263.9) = 8 15 11.04 48 22 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.3 +/- 22.6
  Background counts = 139.1
  Rate = 0.002 +/- 0.0003

[Sat Jun 29 11:38:05 2013] Off-axis axis estimate = 11.09'
[Sat Jun 29 11:38:29 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:29 2013] Initial guess for spatial extent in simple fitting = 11.97"
[Sat Jun 29 11:38:29 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.993
[Sat Jun 29 11:38:29 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 11.97"
[Sat Jun 29 11:38:29 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src38.ximg exists
[Sat Jun 29 11:38:29 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src38_1.ximg exists
[Sat Jun 29 11:38:29 2013] Fit fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src38 appears to have run properly
[Sat Jun 29 11:38:30 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sat Jun 29 11:38:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sat Jun 29 11:38:30 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sat Jun 29 11:38:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sat Jun 29 11:38:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:39 2013] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 16.039831 pixels away
[Sat Jun 29 11:38:39 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:38:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:38:39 2013] Assessing source extent using major
[Sat Jun 29 11:38:39 2013] Source does appear to be extended
[Sat Jun 29 11:38:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:38:57 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:57 2013] Initial guess for spatial extent in simple fitting = 11.97"
[Sat Jun 29 11:38:57 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.993
[Sat Jun 29 11:38:57 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 11.97"
[Sat Jun 29 11:38:57 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src38.ximg exists
[Sat Jun 29 11:38:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src38.csv
[Sat Jun 29 11:38:57 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src38_1.ximg exists
[Sat Jun 29 11:38:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src38.csv
[Sat Jun 29 11:38:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:58 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Sat Jun 29 11:38:58 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Sat Jun 29 11:38:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:39:07 2013] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 16.039831 pixels away
[Sat Jun 29 11:39:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:39:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:39:07 2013] Assessing source extent using major
[Sat Jun 29 11:39:07 2013] Source does appear to be extended
[Sat Jun 29 11:39:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:39:25 2013] XMMSAS src. selection expression = ellipse(38878.103180, 22911.580048, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 29 11:39:25 2013] Not overwriting source region fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41_src.reg
[Sat Jun 29 11:39:25 2013] Extracting stamp from image fullrun_pn_xmm0604810101_pi300-10000_cl_sm2.00.img.gz, (410, 226) - (485, 301)
[Sat Jun 29 11:39:25 2013] XMMSAS bgd. selection expression = annulus(38878.103180, 22911.580048, 1087.500000, 2175.000000, X, Y) && !ellipse(41157.788330, 21951.100632, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 29 11:39:25 2013] Writing fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41.gif
[Sat Jun 29 11:39:33 2013] ../../xmm0604810101/products/events/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41_src.evt and ../../xmm0604810101/products/events/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41_bgd.evt exist, delete to re-create
[Sat Jun 29 11:39:33 2013] Mean detx,y = (-12492.03, -5207.11) 
[Sat Jun 29 11:39:33 2013] ../../xmm0604810101/products/images/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41_src.img and ../../xmm0604810101/products/images/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41_bgd.img exist, delete to re-create
[Sat Jun 29 11:39:33 2013] ../../xmm0604810101/products/spectra/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41_src.pi and ../../xmm0604810101/products/spectra/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41_bgd.pi exist, delete to re-create
[Sat Jun 29 11:39:33 2013] Setting source spectrum file to fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41_src.pi.gz
[Sat Jun 29 11:39:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Sat Jun 29 11:39:33 2013] ../../xmm0604810101/products/lightcurves/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41_src.lc and ../../xmm0604810101/products/lightcurves/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41_bgd.lc exist, delete to re-create
[Sat Jun 29 11:39:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 29 11:39:45 2013] rmf not generated due to insufficient counts
[Sat Jun 29 11:54:44 2013] Updating aperture counts using extracted products
[Sat Jun 29 11:54:44 2013] Total counts from fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41_src.pi.gz = 837.00
[Sat Jun 29 11:54:44 2013] Total counts from fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41_bgd.pi.gz = 5105.00
[Sat Jun 29 11:54:44 2013] Got source and background scale factors 1141082.000000, 9548659.000000
[Sat Jun 29 11:54:44 2013] User source parameters:
  Position = (447.4, 263.9) = 8 15 11.04 48 22 37.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 226.9 +/- 29.9
  Background aperture counts = 610.1
  Rate = 0.003 +/- 0.0004

[Sat Jun 29 11:54:44 2013] Updating counts from extracted products
[Sat Jun 29 11:54:44 2013] Set source signif. to 226.94/24.70 = 9.19
[Sat Jun 29 11:54:46 2013] No arf file for this source, not re-computing flux
[Sat Jun 29 11:54:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 29 11:54:58 2013] xmm0604810101/analysis//spectral/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete