[Sat Jun 29 11:38:04 2013] Detection parameters:
  Position = (223.9, 289.8) = 8 16 48.65 48 24 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 563.8 +/- 32.3
  Background counts = 134.1
  Rate = 0.01 +/- 0.0006

[Sat Jun 29 11:38:05 2013] Off-axis axis estimate = 5.44'
[Sat Jun 29 11:38:29 2013] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:29 2013] Initial guess for spatial extent in simple fitting = 9.15"
[Sat Jun 29 11:38:29 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.107
[Sat Jun 29 11:38:29 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.15"
[Sat Jun 29 11:38:29 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun 29 11:38:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src11.csv
[Sat Jun 29 11:38:29 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun 29 11:38:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src11.csv
[Sat Jun 29 11:38:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:30 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun 29 11:38:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 29 11:38:30 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun 29 11:38:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 29 11:38:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:39 2013] Source 12 is offset by -2.064602 and 3.847828 pixels which is larger than
2 X fitted extent = 1.004713 x 1.004713, not incorporating fit results
[Sat Jun 29 11:38:39 2013] Spatial fit model total counts = 1741.290000, observed total counts = 1353.000000
[Sat Jun 29 11:38:39 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 29 11:38:39 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:38:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:38:39 2013] Assessing source extent using major
[Sat Jun 29 11:38:39 2013] Source does appear to be extended
[Sat Jun 29 11:38:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:38:57 2013] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:57 2013] Initial guess for spatial extent in simple fitting = 9.15"
[Sat Jun 29 11:38:57 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.107
[Sat Jun 29 11:38:57 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 9.15"
[Sat Jun 29 11:38:57 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jun 29 11:38:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src11.csv
[Sat Jun 29 11:38:57 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jun 29 11:38:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src11.csv
[Sat Jun 29 11:38:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:58 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 29 11:38:58 2013] fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 29 11:38:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:39:07 2013] Source 12 is offset by -2.064602 and 3.847828 pixels which is larger than
2 X fitted extent = 1.004713 x 1.004713, not incorporating fit results
[Sat Jun 29 11:39:07 2013] Warning, spatial fit 11 centroid is now closest to src. 37
[Sat Jun 29 11:39:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:39:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:39:07 2013] Assessing source extent using major
[Sat Jun 29 11:39:07 2013] Source does appear to be extended
[Sat Jun 29 11:39:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:39:24 2013] XMMSAS src. selection expression = ellipse(19430.601669, 25164.983063, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 29 11:39:24 2013] Not overwriting source region fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12_src.reg
[Sat Jun 29 11:39:24 2013] Extracting stamp from image fullrun_pn_xmm0604810101_pi300-10000_cl_sm2.00.img.gz, (186, 252) - (261, 327)
[Sat Jun 29 11:39:24 2013] XMMSAS bgd. selection expression = annulus(19430.601669, 25164.983063, 1087.500000, 2175.000000, X, Y) && !ellipse(22029.110703, 25889.535248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20379.400284, 25525.968811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20133.737061, 27616.727386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18516.991200, 25208.302000, 389.048011, 389.048011, 0.000000, X, Y) && !ellipse(21530.529388, 24095.972687, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 29 11:39:24 2013] Writing fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12.gif
[Sat Jun 29 11:39:27 2013] ../../xmm0604810101/products/events/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0604810101/products/events/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sat Jun 29 11:39:27 2013] Mean detx,y = (5426.38, 2658.66) 
[Sat Jun 29 11:39:27 2013] ../../xmm0604810101/products/images/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12_src.img and ../../xmm0604810101/products/images/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Sat Jun 29 11:39:27 2013] ../../xmm0604810101/products/spectra/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12_src.pi and ../../xmm0604810101/products/spectra/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Sat Jun 29 11:39:27 2013] Setting source spectrum file to fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12_src.pi.gz
[Sat Jun 29 11:39:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Jun 29 11:39:27 2013] ../../xmm0604810101/products/lightcurves/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0604810101/products/lightcurves/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sat Jun 29 11:39:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 29 11:39:43 2013] rmf not generated due to insufficient counts
[Sat Jun 29 11:54:40 2013] Updating aperture counts using extracted products
[Sat Jun 29 11:54:40 2013] Total counts from fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12_src.pi.gz = 1064.00
[Sat Jun 29 11:54:40 2013] Total counts from fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12_bgd.pi.gz = 3696.00
[Sat Jun 29 11:54:40 2013] Got source and background scale factors 1095388.000000, 7321790.000000
[Sat Jun 29 11:54:40 2013] User source parameters:
  Position = (223.9, 289.8) = 8 16 48.65 48 24 29.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 511.1 +/- 33.6
  Background aperture counts = 552.9
  Rate = 0.008 +/- 0.0005

[Sat Jun 29 11:54:40 2013] Updating counts from extracted products
[Sat Jun 29 11:54:40 2013] Set source signif. to 511.05/23.51 = 21.73
[Sat Jun 29 11:54:46 2013] No arf file for this source, not re-computing flux
[Sat Jun 29 11:54:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 29 11:54:58 2013] xmm0604810101/analysis//spectral/fullrun_pn_xmm0604810101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete