[Sat Jun 29 11:38:09 2013] Detection parameters:
  Position = (147.7, 197.2) = 8 17 21.81 48 17 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.0 +/- 19.6
  Background counts = 79.4
  Rate = 0.002 +/- 0.0002

[Sat Jun 29 11:38:09 2013] Off-axis axis estimate = 13.16'
[Sat Jun 29 11:38:31 2013] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 29 11:38:31 2013] Initial guess for spatial extent in simple fitting = 13.01"
[Sat Jun 29 11:38:31 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Sat Jun 29 11:38:31 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 13.01"
[Sat Jun 29 11:38:31 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src18.ximg exists
[Sat Jun 29 11:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src18.csv
[Sat Jun 29 11:38:31 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat Jun 29 11:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src18.csv
[Sat Jun 29 11:38:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:32 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat Jun 29 11:38:32 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Jun 29 11:38:32 2013] Fit fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sat Jun 29 11:38:46 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 13.604091 pixels away
[Sat Jun 29 11:38:46 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 13.768850 pixels away
[Sat Jun 29 11:38:46 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:38:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:38:46 2013] Assessing source extent using major
[Sat Jun 29 11:38:46 2013] Source does appear to be extended
[Sat Jun 29 11:38:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:38:59 2013] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 29 11:38:59 2013] Initial guess for spatial extent in simple fitting = 13.01"
[Sat Jun 29 11:38:59 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Sat Jun 29 11:38:59 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 13.01"
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src18.ximg exists
[Sat Jun 29 11:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src18.csv
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat Jun 29 11:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src18.csv
[Sat Jun 29 11:38:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Jun 29 11:38:59 2013] Fit fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sat Jun 29 11:39:13 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 16.308754 pixels away
[Sat Jun 29 11:39:13 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 13.768850 pixels away
[Sat Jun 29 11:39:13 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:39:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:39:13 2013] Assessing source extent using major
[Sat Jun 29 11:39:13 2013] Source does appear to be extended
[Sat Jun 29 11:39:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:39:52 2013] XMMSAS src. selection expression = ellipse(12798.033157, 17112.246017, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 29 11:39:52 2013] Not overwriting source region fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src29_src.reg
[Sat Jun 29 11:39:52 2013] Extracting stamp from image fullrun_mos2_xmm0604810101_pi300-10000_cl_sm2.00.img.gz, (110, 160) - (185, 235)
[Sat Jun 29 11:39:52 2013] XMMSAS bgd. selection expression = annulus(12798.033157, 17112.246017, 1087.500000, 2175.000000, X, Y) && !ellipse(15710.308243, 19241.772003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10807.524506, 16722.724014, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 29 11:39:52 2013] Writing fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src29.gif
[Sat Jun 29 11:42:12 2013] Mean detx,y = (-13922.99, 3141.20) 
[Sat Jun 29 11:42:12 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 29 11:42:18 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 29 11:42:18 2013] Setting source spectrum file to fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jun 29 11:42:18 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Jun 29 11:52:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 29 11:52:09 2013] rmf not generated due to insufficient counts
[Sat Jun 29 11:54:52 2013] Updating aperture counts using extracted products
[Sat Jun 29 11:54:52 2013] Total counts from fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 248.00
[Sat Jun 29 11:54:52 2013] Total counts from fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 1433.00
[Sat Jun 29 11:54:52 2013] Got source and background scale factors 1277624.000000, 9706440.000000
[Sat Jun 29 11:54:52 2013] User source parameters:
  Position = (147.7, 197.2) = 8 17 21.81 48 17 45.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 59.4 +/- 16.8
  Background aperture counts = 188.6
  Rate = 0.0008 +/- 0.0002

[Sat Jun 29 11:54:52 2013] Updating counts from extracted products
[Sat Jun 29 11:54:52 2013] Set source signif. to 59.38/13.73 = 4.32
[Sat Jun 29 11:54:53 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 11:54:53 2013] Using photon index=1.80, rate=0.000822, arf fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src29.arf
[Sat Jun 29 11:54:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 29 11:54:53 2013] Updating source flux to 1.9e-14
[Sat Jun 29 11:54:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 29 11:54:57 2013] xmm0604810101/analysis//spectral/fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete