[Sat Jun 29 11:38:08 2013] Detection parameters:
  Position = (362.5, 278.1) = 8 15 48.11 48 23 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.7 +/- 17.6
  Background counts = 97.1
  Rate = 0.002 +/- 0.0003

[Sat Jun 29 11:38:09 2013] Off-axis axis estimate = 4.87'
[Sat Jun 29 11:38:31 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:31 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Sat Jun 29 11:38:31 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.970
[Sat Jun 29 11:38:31 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 8.87"
[Sat Jun 29 11:38:31 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jun 29 11:38:31 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jun 29 11:38:31 2013] Fit fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src20 appears to have run properly
[Sat Jun 29 11:38:32 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jun 29 11:38:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun 29 11:38:32 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jun 29 11:38:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun 29 11:38:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:46 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 12.560433 pixels away
[Sat Jun 29 11:38:46 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:38:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:38:46 2013] Assessing source extent using major
[Sat Jun 29 11:38:46 2013] Source does appear to be extended
[Sat Jun 29 11:38:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:38:59 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:59 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Sat Jun 29 11:38:59 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.970
[Sat Jun 29 11:38:59 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 8.87"
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src20.ximg exists
[Sat Jun 29 11:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src20.csv
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Jun 29 11:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src20.csv
[Sat Jun 29 11:38:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Jun 29 11:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Jun 29 11:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat Jun 29 11:38:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:39:13 2013] Spatial fit model total counts = 401.958000, observed total counts = 354.000000
[Sat Jun 29 11:39:13 2013] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 29 11:39:13 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:39:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:39:13 2013] Assessing source extent using major
[Sat Jun 29 11:39:13 2013] Source does appear to be extended
[Sat Jun 29 11:39:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:39:52 2013] XMMSAS src. selection expression = ellipse(31489.679688, 24142.287018, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 29 11:39:52 2013] Not overwriting source region fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src25_src.reg
[Sat Jun 29 11:39:52 2013] Extracting stamp from image fullrun_mos2_xmm0604810101_pi300-10000_cl_sm2.00.img.gz, (325, 241) - (400, 316)
[Sat Jun 29 11:39:52 2013] XMMSAS bgd. selection expression = annulus(31489.679688, 24142.287018, 1087.500000, 2175.000000, X, Y)
[Sat Jun 29 11:39:52 2013] Writing fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src25.gif
[Sat Jun 29 11:42:34 2013] Mean detx,y = (6009.25, 1605.35) 
[Sat Jun 29 11:42:35 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 29 11:42:48 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 29 11:42:48 2013] Setting source spectrum file to fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Jun 29 11:42:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Jun 29 11:52:17 2013] Not generating rmf since there are only 95 counts
[Sat Jun 29 11:52:17 2013] rmf not generated due to insufficient counts
[Sat Jun 29 11:54:52 2013] Updating aperture counts using extracted products
[Sat Jun 29 11:54:52 2013] Total counts from fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 279.00
[Sat Jun 29 11:54:52 2013] Total counts from fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src25_bgd.pi.gz = 1714.00
[Sat Jun 29 11:54:52 2013] Got source and background scale factors 1223474.000000, 10290326.000000
[Sat Jun 29 11:54:52 2013] User source parameters:
  Position = (362.5, 278.1) = 8 15 48.11 48 23 35.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 75.2 +/- 17.7
  Background aperture counts = 203.8
  Rate = 0.001 +/- 0.0002

[Sat Jun 29 11:54:52 2013] Updating counts from extracted products
[Sat Jun 29 11:54:52 2013] Set source signif. to 75.21/14.28 = 5.27
[Sat Jun 29 11:54:53 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 11:54:53 2013] Using photon index=1.80, rate=0.00104, arf fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src25.arf
[Sat Jun 29 11:54:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 29 11:54:53 2013] Updating source flux to 1.6e-14
[Sat Jun 29 11:54:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 29 11:54:57 2013] xmm0604810101/analysis//spectral/fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete