[Sat Jun 29 11:38:08 2013] Detection parameters:
  Position = (183.2, 330.1) = 8 17 6.48 48 27 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.9 +/- 16.3
  Background counts = 88.7
  Rate = 0.002 +/- 0.0003

[Sat Jun 29 11:38:09 2013] Off-axis axis estimate = 8.67'
[Sat Jun 29 11:38:31 2013] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:31 2013] Initial guess for spatial extent in simple fitting = 10.76"
[Sat Jun 29 11:38:31 2013] source mask rpix=2.5, npix_max = 35, mask sum = 31, frac = 0.876
[Sat Jun 29 11:38:31 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 10.76"
[Sat Jun 29 11:38:31 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src16.ximg exists
[Sat Jun 29 11:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src16.csv
[Sat Jun 29 11:38:31 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Jun 29 11:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src16.csv
[Sat Jun 29 11:38:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:32 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Jun 29 11:38:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat Jun 29 11:38:32 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Jun 29 11:38:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat Jun 29 11:38:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:46 2013] Source 18 is offset by 5.842800 and -6.212101 pixels which is larger than
2 X fitted extent = 1.294920 x 1.294920, not incorporating fit results
[Sat Jun 29 11:38:46 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 14.473255 pixels away
[Sat Jun 29 11:38:46 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:38:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:38:46 2013] Assessing source extent using major
[Sat Jun 29 11:38:46 2013] Source does appear to be extended
[Sat Jun 29 11:38:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:38:59 2013] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:59 2013] Initial guess for spatial extent in simple fitting = 10.76"
[Sat Jun 29 11:38:59 2013] source mask rpix=2.5, npix_max = 35, mask sum = 31, frac = 0.876
[Sat Jun 29 11:38:59 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 10.76"
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src16.ximg exists
[Sat Jun 29 11:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src16.csv
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Jun 29 11:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src16.csv
[Sat Jun 29 11:38:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Jun 29 11:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Jun 29 11:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sat Jun 29 11:38:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:39:13 2013] Source 18 is offset by 5.842800 and -6.212101 pixels which is larger than
2 X fitted extent = 1.294920 x 1.294920, not incorporating fit results
[Sat Jun 29 11:39:13 2013] Spatial fit model total counts = 369.588000, observed total counts = 311.000000
[Sat Jun 29 11:39:13 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 29 11:39:13 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:39:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:39:13 2013] Assessing source extent using major
[Sat Jun 29 11:39:13 2013] Source does appear to be extended
[Sat Jun 29 11:39:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:39:52 2013] XMMSAS src. selection expression = ellipse(15890.089569, 28674.313171, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 29 11:39:52 2013] Not overwriting source region fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src18_src.reg
[Sat Jun 29 11:39:52 2013] Extracting stamp from image fullrun_mos2_xmm0604810101_pi300-10000_cl_sm2.00.img.gz, (146, 293) - (221, 368)
[Sat Jun 29 11:39:52 2013] XMMSAS bgd. selection expression = annulus(15890.089569, 28674.313171, 1087.500000, 2175.000000, X, Y) && !ellipse(14542.265274, 28245.167511, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 29 11:39:52 2013] Writing fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src18.gif
[Sat Jun 29 11:41:43 2013] Mean detx,y = (-7653.66, -7148.37) 
[Sat Jun 29 11:41:44 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 29 11:41:59 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 29 11:41:59 2013] Setting source spectrum file to fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Jun 29 11:41:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Jun 29 11:52:00 2013] Not generating rmf since there are only 92 counts
[Sat Jun 29 11:52:00 2013] rmf not generated due to insufficient counts
[Sat Jun 29 11:54:51 2013] Updating aperture counts using extracted products
[Sat Jun 29 11:54:51 2013] Total counts from fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 220.00
[Sat Jun 29 11:54:51 2013] Total counts from fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 1418.00
[Sat Jun 29 11:54:51 2013] Got source and background scale factors 1093354.000000, 8933068.000000
[Sat Jun 29 11:54:51 2013] User source parameters:
  Position = (183.2, 330.1) = 8 17 6.48 48 27 22.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 46.4 +/- 15.9
  Background aperture counts = 173.6
  Rate = 0.0006 +/- 0.0002

[Sat Jun 29 11:54:51 2013] Updating counts from extracted products
[Sat Jun 29 11:54:51 2013] Set source signif. to 46.45/13.17 = 3.53
[Sat Jun 29 11:54:53 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 11:54:53 2013] Using photon index=1.80, rate=0.000643, arf fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src18.arf
[Sat Jun 29 11:54:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 29 11:54:53 2013] Updating source flux to 1.1e-14
[Sat Jun 29 11:54:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 29 11:54:57 2013] xmm0604810101/analysis//spectral/fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete