[Sat Jun 29 11:38:07 2013] Detection parameters:
  Position = (146.9, 284.1) = 8 17 22.27 48 24 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 269.5 +/- 23.8
  Background counts = 84.2
  Rate = 0.006 +/- 0.0005

[Sat Jun 29 11:38:09 2013] Off-axis axis estimate = 11.03'
[Sat Jun 29 11:38:31 2013] Using EEF radius (= 11.95 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 29 11:38:31 2013] Initial guess for spatial extent in simple fitting = 11.95"
[Sat Jun 29 11:38:31 2013] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.854
[Sat Jun 29 11:38:31 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.95"
[Sat Jun 29 11:38:31 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 29 11:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src1.csv
[Sat Jun 29 11:38:31 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 29 11:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src1.csv
[Sat Jun 29 11:38:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:31 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 29 11:38:31 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 29 11:38:31 2013] Fit fullrun_mos2_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 29 11:38:46 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.139088 pixels away
[Sat Jun 29 11:38:46 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:38:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:38:46 2013] Assessing source extent using major
[Sat Jun 29 11:38:46 2013] Source does appear to be extended
[Sat Jun 29 11:38:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:38:59 2013] Using EEF radius (= 11.95 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 29 11:38:59 2013] Initial guess for spatial extent in simple fitting = 11.95"
[Sat Jun 29 11:38:59 2013] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.854
[Sat Jun 29 11:38:59 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.95"
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 29 11:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src1.csv
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 29 11:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src1.csv
[Sat Jun 29 11:38:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 29 11:38:59 2013] fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 29 11:38:59 2013] Fit fullrun_mos2_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 29 11:39:13 2013] Spatial fit model total counts = 751.998000, observed total counts = 752.000000
[Sat Jun 29 11:39:13 2013] Offset between fit and detection position for source 1 = 0.208573 pixels
[Sat Jun 29 11:39:13 2013] 753.988000 total counts/ 613.682000 bgd. counts: snr = 5.663756
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.208573 pixels
  Position = (147.1, 284.2) = 8 17 22.20 48 24 3.7
  Extent = 4.3 (3.6-5.2)", rotation angle = 0
  Source counts = 140.3 +/- 27.5
  Background counts = 613.7
  Rate = 0.002 +/- 0.0004
[Sat Jun 29 11:39:13 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:39:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:39:13 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 11:39:13 2013] Source does appear to be extended
[Sat Jun 29 11:39:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:39:52 2013] XMMSAS src. selection expression = ellipse(12747.470600, 24678.216600, 255.811207, 255.811207, 0.000000, X, Y)
[Sat Jun 29 11:39:52 2013] Not overwriting source region fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 29 11:39:52 2013] Extracting stamp from image fullrun_mos2_xmm0604810101_pi300-10000_cl_sm2.00.img.gz, (132, 270) - (162, 299)
[Sat Jun 29 11:39:52 2013] XMMSAS bgd. selection expression = annulus(12747.470600, 24678.216600, 426.352012, 852.704025, X, Y)
[Sat Jun 29 11:39:52 2013] Writing fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1.gif
[Sat Jun 29 11:39:52 2013] ../../xmm0604810101/products/events/fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0604810101/products/events/fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Jun 29 11:39:52 2013] Mean detx,y = (-11792.06, -4152.80) 
[Sat Jun 29 11:39:52 2013] ../../xmm0604810101/products/images/fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0604810101/products/images/fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Jun 29 11:39:52 2013] ../../xmm0604810101/products/spectra/fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1_src.pi and ../../xmm0604810101/products/spectra/fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Jun 29 11:39:52 2013] Setting source spectrum file to fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Jun 29 11:39:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 29 11:39:52 2013] ../../xmm0604810101/products/lightcurves/fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0604810101/products/lightcurves/fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Jun 29 11:54:50 2013] Updating aperture counts using extracted products
[Sat Jun 29 11:54:50 2013] Total counts from fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1_src.pi.gz = 178.00
[Sat Jun 29 11:54:50 2013] Total counts from fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 248.00
[Sat Jun 29 11:54:50 2013] Got source and background scale factors 208000.000000, 1719180.000000
[Sat Jun 29 11:54:50 2013] User source parameters:
  Position = (147.1, 284.2) = 8 17 22.20 48 24 3.7
  Extent = 4.3 (3.6-5.2)", rotation angle = 0
  Source aperture counts = 148.0 +/- 14.4
  Background aperture counts = 30.0
  Rate = 0.002 +/- 0.0002

[Sat Jun 29 11:54:53 2013] No arf file for this source, not re-computing flux
[Sat Jun 29 11:54:56 2013] Source 1 has no response, skipping
[Sat Jun 29 11:54:57 2013] xmm0604810101/analysis//spectral/fullrun_mos2_xmm0604810101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete