[Sat Jun 29 11:38:06 2013] Detection parameters:
  Position = (125.1, 192.4) = 8 17 31.65 48 17 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.8 +/- 16.2
  Background counts = 53.5
  Rate = 0.001 +/- 0.0002

[Sat Jun 29 11:38:07 2013] Off-axis axis estimate = 14.74'
[Sat Jun 29 11:38:30 2013] Using EEF radius (= 13.80 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:30 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 29 11:38:30 2013] Initial guess for spatial extent in simple fitting = 13.80"
[Sat Jun 29 11:38:30 2013] source mask rpix=3.2, npix_max = 53, mask sum = 40, frac = 0.742
[Sat Jun 29 11:38:30 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 13.80"
[Sat Jun 29 11:38:31 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_src19.ximg exists
[Sat Jun 29 11:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_src19.csv
[Sat Jun 29 11:38:31 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Jun 29 11:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_src19.csv
[Sat Jun 29 11:38:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:31 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Jun 29 11:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sat Jun 29 11:38:31 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Jun 29 11:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sat Jun 29 11:38:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604810101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:42 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 17.677430 pixels away
[Sat Jun 29 11:38:42 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:38:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:38:42 2013] Assessing source extent using major
[Sat Jun 29 11:38:42 2013] Source does appear to be extended
[Sat Jun 29 11:38:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:38:58 2013] Using EEF radius (= 13.80 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 11:38:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 29 11:38:58 2013] Initial guess for spatial extent in simple fitting = 13.80"
[Sat Jun 29 11:38:58 2013] source mask rpix=3.2, npix_max = 53, mask sum = 40, frac = 0.742
[Sat Jun 29 11:38:58 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 13.80"
[Sat Jun 29 11:38:58 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src19.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src19.csv
[Sat Jun 29 11:38:58 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src19.csv
[Sat Jun 29 11:38:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:38:58 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Jun 29 11:38:58 2013] fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Jun 29 11:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Jun 29 11:38:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0604810101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 11:39:10 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 17.455807 pixels away
[Sat Jun 29 11:39:10 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 11:39:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 11:39:10 2013] Assessing source extent using major
[Sat Jun 29 11:39:10 2013] Source does appear to be extended
[Sat Jun 29 11:39:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 11:39:47 2013] XMMSAS src. selection expression = ellipse(10832.049675, 16688.038712, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 29 11:39:47 2013] Not overwriting source region fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun 29 11:39:47 2013] Extracting stamp from image fullrun_mos1_xmm0604810101_pi300-10000_cl_sm2.00.img.gz, (88, 155) - (163, 230)
[Sat Jun 29 11:39:47 2013] XMMSAS bgd. selection expression = annulus(10832.049675, 16688.038712, 1087.500000, 2175.000000, X, Y)
[Sat Jun 29 11:39:47 2013] Writing fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6.gif
[Sat Jun 29 11:39:47 2013] ../../xmm0604810101/products/events/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0604810101/products/events/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sat Jun 29 11:39:47 2013] Mean detx,y = (3044.31, 15610.61) 
[Sat Jun 29 11:39:47 2013] ../../xmm0604810101/products/images/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6_src.img and ../../xmm0604810101/products/images/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Sat Jun 29 11:39:47 2013] ../../xmm0604810101/products/spectra/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6_src.pi and ../../xmm0604810101/products/spectra/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sat Jun 29 11:39:47 2013] Setting source spectrum file to fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6_src.pi.gz
[Sat Jun 29 11:39:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun 29 11:39:47 2013] ../../xmm0604810101/products/lightcurves/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0604810101/products/lightcurves/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sat Jun 29 11:39:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 29 11:39:51 2013] rmf not generated due to insufficient counts
[Sat Jun 29 11:54:49 2013] Updating aperture counts using extracted products
[Sat Jun 29 11:54:49 2013] Total counts from fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6_src.pi.gz = 153.00
[Sat Jun 29 11:54:49 2013] Total counts from fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 917.00
[Sat Jun 29 11:54:49 2013] Got source and background scale factors 699284.000000, 3707780.000000
[Sat Jun 29 11:54:49 2013] User source parameters:
  Position = (125.1, 192.4) = 8 17 31.65 48 17 26.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -19.9 +/- 13.4
  Background aperture counts = 172.9
  Rate = -0.0003 +/- 0.0002

[Sat Jun 29 11:54:49 2013] Updating counts from extracted products
[Sat Jun 29 11:54:49 2013] Set source signif. to -19.95/13.15 = -1.52
[Sat Jun 29 11:54:50 2013] No arf file for this source, not re-computing flux
[Sat Jun 29 11:54:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 29 11:54:56 2013] xmm0604810101/analysis//spectral/fullrun_mos1_xmm0604810101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete